RabidNinja64

Takes alot of my mind haha Whats the courier service like? feel like im gonna miss it when it comes xD

Ups, they're ok. They'll usually leave it with a neighbour

Sweet my only worry now is if the info in the comments section went through with my downgrade and ukara im a worrier like that!

what gun?

PJ4 in dark earth

Why not just sand it down till it's "chrome" then polish it?

can you do this with all guns? might do it with my g&g extreme, what grit sandpaper do i need.

Start with something like 120 and then use 150 to smooth it out.

oh they'd go weak at the knee's you go all Mr grey on their arses..but you try speak in klingon they'll ditch you faster than a bad burrito

i guess the only solution is to become a rich pervert first and then spank them with your bat'leth?

@Colonel Good point well presented old chap.

What gun you saving for, and could it be used to mug someone for a pair of headphones hehe

Hell, i'd shoot someone on principle if they were wearing beats! and honestly i got my eyes on this beauty http://www.taiwangun.com/en/electric-air-soft-guns/pj4-casv-dark-earth-p-j?from=listing&campaign-id=20

*Which is tomorrow

strange, my WE Glocks hop is sh*t too.

probably something you've already done, but I stripped my hop unit out, de greased everything and put it all back together ensuring everything was tight. I had a 1911 which had no lift, turns out the hop lever had slipped of the hop wheel so wasn't actually applying any pressure.

My WE G17 can hit a coke can at around 15-20 meters, which I think is pretty good. It's a US G17, but I doubt that would change anything.

Ebay it. There are plenty of cheap replica helmets based on everything from WWI helmets to modern stuff.

M88?

Depends on the quality you want. You can get a plastic M88 for £12-£15,

Yeah most have small o-rings in tnem

No idea of the specific name though but if you go to Halfords or something I'm sure they'll have a load of small ones

Well it got sent off through a friend to a guy who knows his stuff n he's offered to upgrade the gears if necessary; 3 days apparently, so by saturday it should be up and running

Any gearset is only ever as good as its shimming...

Good to know ill be sure to keep an eye on it.

So it looks a good 'un like I said

Still not sure about front end but it is deffo different to G&G's

Well i hate going against everyone elses opinion for G&G (Not really) but if its something that will function properly, wont break down on me in the first 2 weeks and is easy to maintain and change parts should they need it, then PJ4 will be the first rifle i've actually bought for myself, aside from the VFC mp7 and the PX4 You've all been a good help and a laugh, so should i need help or guidance, your all first to be pestered! xD

bollox - if its not a G&G then you are on ya own sunshine

just kidding

indeed - when I think back to the money I spent at BB clown sites, I feel very unwell.

Gotta love a bargain or two or three - damn I really need help now

If I get a 20% or 25% discount code, then I just have to buy something or I feel I have wasted an opportunity. UK Tactical love me.

Same with me jedi, except they've got cheap coyote pouches that make up the most of my vest +1 backup triple pouch....all for under a tenner ;D

probably better getting a prescription insert made for them, less likely to fog up and purpose built.

The cheaper SAAVs aren't particularly tough- the original South African M83 vest would be a better buy if you really like the style and can afford it. As for mag compatibility, the vest's mag pouches are designed for 5.56 size Galil mags, so it'll definitely fit magazines the width of an MP7 mag.

I'm more concerned about the length/height of MP7 and if they'll fit in the mag pouches if they can fit an M4 mag or two, wanna compare it to MP7 mags.

lol by branding i actually meant in terms of the quality of their clones, considering they arent necessarily known (to me) for putting out any decent weapons.

I've owned both TM AND vfc SCARs....TM's are far superior!

Thing to remember is mag compatibility with many 416's as magwell is a bit bigger than regular M4 - mid caps work best in my hk-416.

nice gun but it does need a few upgrades - mainly hop unit and getting good mags

stock mag is w@nk

I was hoping that wernt the case with the trigger contacts haha; and Kurtz yeah it's still shooting normally now. messing around with it last night i kinda sorted it with pulling the trigger alot so it settles in with the selector plate (??). The only issue now is that when i switch from semi to auto it doesnt stop firing.

Saying that, we (me and my bro) only noticed all this when we tried switching it to deans last night. The wiring is also silver plated so could it be somethi...

*Could it be something with the resistance or the battery? id be using a 7.4 lipo btw.

This kinda thing happening only after battery/lead swap suggests arcing perhaps?

not at all fella, youc an get most things there http://www.taiwangun.com/en/complet-mecha-box-set

Crack open a random gearbox and just inspect how it all works

You break something then you fix it.

Pretty simple really.

the hop on the VFC is alright tbf; ive yet to hold a TM to know the difference but given the chance id probably swap for one other than that the cooldown on VFC isn't too harsh either, just more preferable to stay on single shot

Then again saying that for a woodland game, i intend to be running around quite abit in a sort of "lone wolf" perspective.

damn

It means your wearing to much kit.

because a 2 triple mag pouches that are empty is heavy enough xD nah, just decided to sling my M4 on the vest as it was hanging up...bad choice......

if its new take it back

feeding could be hop but the grinding makes me think tappet not moving 101% correctly to load bb's

grinding could be tappet plate borked/stuck - still getting compression so sector is pulling piston ok atm

Nah its about a few months bought from a friend second hand. somet was gonna come along and eff up eventually. so you reckon its not fully gearbox internal based? ill have to take it down to JD and have em look it over.

Probably best, sounds like tappet plate but I'm still guessing coz not got it here to see/hear for myself