matas17
-
Posts
229 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by matas17
-
Any idea if Warrior drop leg holster accepts pistols with flashlight. Such as FNX-45 or a hi-capa
- Show previous comments 2 more
-
Ah, yeah, my bad. The answer is the same though, for @Lozart's reasoning. It's way too snug to fit a gun with a flashlight on it.
-
-
-
I honestly have nothing bad to say about Maple leaf, when it is used with their flat nub it works perfectly.
-
Good choice honestly. Maple leaf never dissapointed me yet, I have prommy purple in mine before but results were not as consistent as i woul of liked then switch to maple leaf macaron 60 and was happy ever since.
-
In my opinion I have to agree with @SBoardley. TM ngrs hop unit is perfect and works flawlessly, I had my ngrs for last 3 and a half years and only things hopup wise i changed were, hop nub, hop bucking and inner barrel. At the moment I am using maple leaf nub, maple leaf super macaron 60 bucking and ZCI 6.02 steel tight bore and results are amazing. I can easily hop anything i put into it and range is around 50 to 60 metres with 300mm tight bore barrel.
-
ran into an issue where my tm fnx45 mags started to leak out of a base plate. anyone got any solutions. I already tried to heat up orings in hot water, had some silicone on them etc. No idea what to do
-
-
-
@RogerborgManaged to get it sorted by using cylinder head oring that was just perfect size, only issue i had was trying to tap the pins back in but got it after few tries.
-
-
VFC MP7A1 gen1 Had it for a while as I bought it for repairs. It was non functioning due to mosfet burning out and trigger micro switch being broken. Mag cut off feature is non fuctioning since I replaced original broken mosfet with Perun. Comes with x5 brand new 120rd midcaps, x2 11.1v 1300mah lipos, PEQ battery box, red dot sight, Angry Gun MP7A1 supressor with trademarks. Currently it shoots under 295 fps on 0.25s Currently it has new: Gears New trigger micro switch unit Bullgear CNC Tappet Plate and Gear Clip Perun AB++ mosfet installed ZCI 200mm 6.02 steel tight bore barrel Maple Leaf yellow bucking & maple leaf flat nub
-
Debating on selling this as I use my DAS GBLS more, currently have vortex SPARC AR red dot on with unity riser. Gun comes with: Dbal, surefire rep light PTS stock and pistol grip PTS Griffin comp Eotech XPS3 & Eotech Magnifier replica's with full trademarks MK18 11inch rail Laylax 11'' outer barrel Laylax Mur upper receiver Laylax Frame trigger lock pin New Buffer tube x6 PTS Mags Cerakoted Parts Include: Upper & Lower receiver with trademarks Cerakoted in black 11'' mk18 rail Mag Catch Charging Handle Fire Selector bolt catch & forward assist Dust cover Castle Nut Front Sight Trigger Guard Internals: Angry Gun heavy recoil kit (Rare to get hands on) NGRS Gate titan Advanced Warhead Brushless motor New Prometheus Piston Laylax(Prometheus) Piston head Prometheus gears Lonex Air nozzle Laylax(Prometheus) cylinder & Cylinder head Laylax(Prometheus) 300mm 6.03 tbb Maple Leaf Macaron bucking and Maple Leaf Omega nub Modify Bushings
-
Has anyone ever experienced where your hi capa slide doesn't rack so far back for slide catch to engage at all. I am wondering what is going on right now, I checked my slide plug with recoil spring and it seems that spring is really right to get inside slide plug for the spring. Any way I can sort this out ?
-
Externals: MK4 Geissele replica handguard from highpressureairsoft Angry Gun Airborne Ambi Charging Handle (Geissele trademarks) Angry gun Socom556 supressor with Xcortech XT301 tracer inside HOA Industries trigger guard Vertical mlok foregrip modified extended mag catch WADSN Dbal Element M300 light with Element pressure switch Unity replica red dot riser Vortex Crossfire II red dot Daniel Defence clone sights internals DAS GBLS Type B buffer/buffer spring DAS GBLS type 2 hop arm ZCI 300mm 6.02 tight bore barrel Maple Leaf 70 degree hop rubber Maple leaf Omega Nub Comes with: Original handguard Original Buffer/buffer spring In total 10 mags x6 standard stanag mags x4 DAS GBLS HP mags. x2 hop adjusments tools DAS GBLS Nozzle tool x2 3d printed odin speed loader mag adapters x2 handheld speed loader adapters. x2 Aeroshell Grease 22 tubs
-
- 1
-
-
Anyone know where to get SA58/FAL mlok handguard, been trying to find one for days now.
-
How come this Bolloksitsmeee spammed entire forums and nothing is done about him so far?
- Show previous comments 7 more
-
Not gone lie but he sounds like some 18 year old wanna be airsoft youtuber type.
-
-
Has anyone ever put tracer unit inside Angrygun surefire socom mini 556 suppressor before and if some which tracer fits?
-
Thanks everyone for replies, Ill look into all these options right now.
-
So I have my boots for a while and I honestly can't remember the brand as they are your typical hiking boots. But recently I noticed they are not as a grippy as I would like them to be especially when running on wet surfaces. So my question is does anyone have recommendations for a decent pair of boots within a budget of lets say £150, that would be comfortable and if possible at least be water resistant.
-
funny guy :D, but on serious note any suggestions.
-
So let me start of with the fact that I love my warrior dcs but I also have an issue. So I typically have my dcs little bit tight but not too tight around my body so it doesn't wiggle but the issue stems from the fact that most of the time sides of my dcs always dig into my waist when i lean to the left or right even when standing up or crouched and after a while it starts to become uncomfortable. Anyone else has ran into this sort of an issue and what were your solutions to solve it?
-
Good Evening all,
has anyone noticed how sometimes pts epm mags for tm ngrs m4 sometimes fall out due to recoil or is it just me. I replaced spring on mags catch but wondering if I need new mag catch now or something.-
try inserting your mags slowly and watching the mag catch, does it actually move? Are you sure it's actually been locked into place? If not or not fully, check inside the mag well, it's likely something is in there (Wedged bb etc) that is prevent the mag going all the way in. When I had this issue it was down to mags not actually catching.
Also if you have changed the mag release to an ambi one, are you sure you aren't just activating it accidently while moving around. you go to use it and the movement of the rif encourages the mag to fall out.
-
-
@EmergencychimpsOh trust me mags lock most of the time but sometimes i noticed the randomly fall out without me even pressing mag release button. One thing I've noticed is that pts epm mags have a lot of movement side to side inside magwell once they are inserted in and locked in with mag catch. So what I'm thinking is I might maybe get some velcro and stick it in on one of the sides inside magwell to reduce the wobble. Maybe that's why the mags fall out randomly while shooting.
And funny thing is standard tm ngrs mags work perfectly never fall or and have minimal wiggle(side to side) but epm's have a lot more.
-
-
AXL velcro adapters are out of stock sadly and can't find any warrior one's anywhere
