Jump to content
Updated Classifieds rule 5 - Adverts must include your username and date in photos

matas17

Members
 View Profile  See their activity

  • Posts

    221

  • Joined

  • Last visited

  • Feedback

    100%

 Content Type 

Everything posted by matas17

  1. matas17
    I bought that mp7 as it was boneyard and mosfet was fried, tappet plate was broken so I decided to change it and sort it out. I got it working and back to 295fps with 0.25s after changing the spring. Now the only issue I find is that it sometimes shoot burst/full auto in semi on full trigger pull, if i just pull trigger once and release it shoots semi.
  2. matas17
    So I have an issue where my vfc mp7a1 is shooting 150-160 fps on 0.25s. I replaced following parts Broken vfc nozzle with ERGAL nozzle for vfc mp7a1 Main spring with original vfc mp7a1 spring New gears Bullgear CNC tappet place and delay chip pack Bucking to maple leaf yellow and original inner barrel with maple leaf 200mm tight bore I've checked the gears, piston/piston head, cylinder and cylinder head multiple times. Airseal is perfect, yet same issue is there and I am running out of ideas as to what to do and what needs to be changed.
  3. matas17

    Anyone has spare vfc mp7 aeg trigger switch board?

  4. matas17

    THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • Wanted
    • Used or as new

    Looking for new or used vfc mp7 trigger board, must be in working condition.

    £12,345

    - GB

  5. matas17

    Any idea if Warrior drop leg holster accepts pistols with flashlight. Such as FNX-45 or a hi-capa

    1. Show previous comments  2 more
    2. Impulse

      Impulse

      Ah, yeah, my bad. The answer is the same though, for @Lozart's reasoning. It's way too snug to fit a gun with a flashlight on it.

    3. matas17

      matas17

      @Lozart@Impulseanother question for you both if you can answer it ofcourse, I have Warrior low profile molle belt and it always keeps riding on my hips and becomes uncomfortable for a while is there something i can do to sort it out somehow

    4. Lozart

      Lozart

      I take it you have the inner belt through your trouser loops? If not, you're wearing it wrong.

       

      What do you have on the belt? You may be overloading it.

  6. matas17
    I honestly have nothing bad to say about Maple leaf, when it is used with their flat nub it works perfectly.
  7. matas17
    Good choice honestly. Maple leaf never dissapointed me yet, I have prommy purple in mine before but results were not as consistent as i woul of liked then switch to maple leaf macaron 60 and was happy ever since.
  8. matas17
    In my opinion I have to agree with @SBoardley. TM ngrs hop unit is perfect and works flawlessly, I had my ngrs for last 3 and a half years and only things hopup wise i changed were, hop nub, hop bucking and inner barrel. At the moment I am using maple leaf nub, maple leaf super macaron 60 bucking and ZCI 6.02 steel tight bore and results are amazing. I can easily hop anything i put into it and range is around 50 to 60 metres with 300mm tight bore barrel.
  9. matas17

    Anyone looking for DAS GBLS mags I got 6 stanag and 4 HP polymer mags.

  10. matas17

    ran into an issue where my tm fnx45 mags started to leak out of a base plate. anyone got any solutions. I already tried to heat up orings in hot water, had some silicone on them etc. No idea what to do

    1. Rogerborg

      Rogerborg

      RTV silicone gasket maker.  Heck, generic plumber's silicone if you have any to hand. I've used that to seal a mag base.  Doubtless better solutions are available.

    2. rj1986

      rj1986

      O ring round the base plate. I've used generic o-rings and they were an absolute bastard to fit. I think the TM made ones are easier as they are a fraction on a mm thinner.

    3. matas17

      matas17

      @RogerborgManaged to get it sorted by using cylinder head oring that was just perfect size, only issue i had was trying to tap the pins back in but got it after few tries.

  11. matas17

    THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • Wanted
    • Used or as new

    Looking for TM ngrs M4 gearbox shell if anyone has one anywhere. Doesn't matter if its new or used.

    £999,999

  12. matas17

    I wonder does Vortex lifetime warranty covers 2nd hand purchases?

    1. BYRNEMORGAN52

      BYRNEMORGAN52

      I'm 98% sure it does yes

    2. JinxDuh

      JinxDuh

      A glance at their site says yes.

      image.png.30eef6bc4a5a8fca91980047473ed411.png

  13. matas17
    VFC MP7A1 gen1 Had it for a while as I bought it for repairs. It was non functioning due to mosfet burning out and trigger micro switch being broken. Mag cut off feature is non fuctioning since I replaced original broken mosfet with Perun. Comes with x5 brand new 120rd midcaps, x2 11.1v 1300mah lipos, PEQ battery box, red dot sight, Angry Gun MP7A1 supressor with trademarks. Currently it shoots under 295 fps on 0.25s Currently it has new: Gears New trigger micro switch unit Bullgear CNC Tappet Plate and Gear Clip Perun AB++ mosfet installed ZCI 200mm 6.02 steel tight bore barrel Maple Leaf yellow bucking & maple leaf flat nub
  14. matas17

    Anyone has ZCI m4 hop unit by any chance or know where i can find one in stock ?

    1. ak2m4

      ak2m4

      you might find you'll need to wait till early March 😞

  15. matas17

    TM NGRS MK18

    matas17 posted a topic in Appraisals

    Debating on selling this as I use my DAS GBLS more, currently have vortex SPARC AR red dot on with unity riser. Gun comes with: Dbal, surefire rep light PTS stock and pistol grip PTS Griffin comp Eotech XPS3 & Eotech Magnifier replica's with full trademarks MK18 11inch rail Laylax 11'' outer barrel Laylax Mur upper receiver Laylax Frame trigger lock pin New Buffer tube x6 PTS Mags Cerakoted Parts Include: Upper & Lower receiver with trademarks Cerakoted in black 11'' mk18 rail Mag Catch Charging Handle Fire Selector bolt catch & forward assist Dust cover Castle Nut Front Sight Trigger Guard Internals: Angry Gun heavy recoil kit (Rare to get hands on) NGRS Gate titan Advanced Warhead Brushless motor New Prometheus Piston Laylax(Prometheus) Piston head Prometheus gears Lonex Air nozzle Laylax(Prometheus) cylinder & Cylinder head Laylax(Prometheus) 300mm 6.03 tbb Maple Leaf Macaron bucking and Maple Leaf Omega nub Modify Bushings
  16. matas17

    VFC MPX

    matas17 posted an advert in Parts & Gear Wanted

    THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • Wanted
    • Used or as new

    Looking for VFC mpx doesn't matter if it's broken/used or working as long as body and most of the externals are fine i will consider it.

    £500

    - GB

  17. matas17

    where did dark mode on website went, sometimes it works sometimes it doesnt

    1. proffrink

      proffrink

      Did you scroll back down to the bottom and re-enable it? The latest update meant that I had to completely renew it, so you'll be back to the default now - light.

  18. matas17

    Hi capa issue

    matas17 posted a topic in Gas Guns

    Has anyone ever experienced where your hi capa slide doesn't rack so far back for slide catch to engage at all. I am wondering what is going on right now, I checked my slide plug with recoil spring and it seems that spring is really right to get inside slide plug for the spring. Any way I can sort this out ?
  19. matas17
    Externals: MK4 Geissele replica handguard from highpressureairsoft Angry Gun Airborne Ambi Charging Handle (Geissele trademarks) Angry gun Socom556 supressor with Xcortech XT301 tracer inside HOA Industries trigger guard Vertical mlok foregrip modified extended mag catch WADSN Dbal Element M300 light with Element pressure switch Unity replica red dot riser Vortex Crossfire II red dot Daniel Defence clone sights internals DAS GBLS Type B buffer/buffer spring DAS GBLS type 2 hop arm ZCI 300mm 6.02 tight bore barrel Maple Leaf 70 degree hop rubber Maple leaf Omega Nub Comes with: Original handguard Original Buffer/buffer spring In total 10 mags x6 standard stanag mags x4 DAS GBLS HP mags. x2 hop adjusments tools DAS GBLS Nozzle tool x2 3d printed odin speed loader mag adapters x2 handheld speed loader adapters. x2 Aeroshell Grease 22 tubs
  20. matas17

    Anyone in UK cerakote airsoft parts for not overly insane prices?

  21. matas17

    Anyone know where to get SA58/FAL mlok handguard, been trying to find one for days now.

    1. Druid799

      Druid799

      To be honest bud you’ve more chance of find 3kgs of rocking horse shit for sale than one of those .😢

  22. matas17

    How come this Bolloksitsmeee spammed entire forums and nothing is done about him so far?

    1. Show previous comments  7 more
    2. matas17

      matas17

      Not gone lie but he sounds like some 18 year old wanna be airsoft youtuber type.

    3. Adolf Hamster

      Adolf Hamster

      from one of the vids he posted on the technical issues he was having he sounded older, not that age is a guarantee of maturity.....

  23. matas17

    Has anyone ever put tracer unit inside Angrygun surefire socom mini 556 suppressor before and if some which tracer fits?

  24. matas17
    Thanks everyone for replies, Ill look into all these options right now.
  25. matas17
    So I have my boots for a while and I honestly can't remember the brand as they are your typical hiking boots. But recently I noticed they are not as a grippy as I would like them to be especially when running on wet surfaces. So my question is does anyone have recommendations for a decent pair of boots within a budget of lets say £150, that would be comfortable and if possible at least be water resistant.
×
×
  • Create New...