sp00n

It was a comparison to my vsr, which has the AA hop unit, and is set mid way atm. that's with 0.43's, i want to switch to 0.45's soon, so more would be better but in the OP's case its irrelevant for him

there is 2 problems with my TM L96 AWS first there is no upgrade for the hop unit at all, so now fully upgraded i only have 2 clicks left in hop adjustment second there is no mancraft kit for it in my view, like proffrink above me, i would advise going with the well MB01 series, its a lot cheaper, and it has lots and lots of upgrades please not the well MB44xx series is TM L96 AWS clones be sure to check out http://www.airsoftsniperparts.com/identifyyourrifle.htm to check gun/part compatibility etc

On a new gun, if your going to be using HPA you have to convert it (very easy), setup the fps (very easy), and the ROF (which can be challenging, if your going for the sweet spot) Then you need the 3D printed nub, as stock it's not that good ... Also the stock barrel isn't that good I know that all sounds bad, but trust me, it's more then worth it, and once set your gold

Like Hef said, once setup, it's brilliant

At one point ares gears where made of pressed dairy lee triangles The newer ones are ok, or so I hope, I have recently got a vz58

its the Rocinante from syfy's the Expanse, been reading the books, really really like it yeah i know it sucks, but they did start on season 2 in anticipation, as they dont have a huge budget and the special effects do take a long time.

Blasters 0.25's Blaster Devils 0.36's Monkey balls 0.4's and above when they get them in stock Proballs 0.43's Edit :- I did have 0.4 and 0.43 rockets and they was ok, but subsequent batches swelled

i had something similar with my jack'ed SR25 first shot went skywards, follow up shots all dropped short. turns out my regulator was dry and not flowing consistently.

new stuff's Mobius action camera mount (needs painting), and the Rocinante this is very special (well i think so!) its a aluminium 3d printed nozzle for a KWC mini uzi (AKA swiss arms protector) .... why is is special?? ... it drops the FPS to sub 350FPS with 0.2's!!!

Thanks mate, but I have ordered the g&p ones off eBay now lol I'll keep it in mind though, thanks mate

It dosnt regulate pressure, it regulates flow It uses the same bottles. Which are 800psi output, not 3k.

Most bottles (except SLP) have a step down regulator built in and output 800psi, (which is the tippmann running pressure) it has no inbuilt pressure regulator, the fps control is achieved by a grub screw obscuring the air path to the nozzle. Ninja/fire base etc regs all step down from 800psi to what ever you set them too

About 2years ago at a local site to me, mid game, a u18 removed the lower part of what looked to be a solid full face mask, literally 10secs later he poked his head round a corner and took a bb to the face and lost most of a front tooth (it may have been fixed I don't know). He took the lower part off, out of sight of everyone. This person had played before, had sat through multiple safety briefings, it was the first time he had done such a thing. I always wear a lower mesh mask as you never know what can happen

Could be a few parts, first thing to check and rule out is are you fully depressing the trigger until the gun has fired? After that remove the gear box and check the linkage arm isn't stiff or binding etc

The g&p m120 I had got hot ... Really hot, very very fast!!! I swapped to a lonex a2, and didn't look back

Other then leaky tanks etc which is easily fixed etc (lots of info on the Facebook owners page) your cocking arm will thank you!! Also mine didn't like any other shells but TM ones

They use exactly the same gearbox so rof will be the same My raider L's cylinder was ported the same as the normal raider. Barrel length has no effect on range, it *may* improve shot deviation though, a longer barrel can increase fps if the cylinder is ported correctly etc In all honesty, pick one up see how it feels etc

not complete yet, as i still need to source batteries and the scope mount

Save yourself a lot of ££ get a g&g cm16 raider, say from zeroone( as they do free two toneing etc) ... Then you will have a nice gun, and 2 year warranty ... Your welcome

I don't think so, they don't do one that's thin enough. The g&p is 15mm x 10mm x 165mm

The Uk site is out of stock of one or both I think

anyone know of a UK supplier of G&P lipo's, i am specifically after the AK (long and thin type) type in both 7.4v and 11.1v flavours

the first batch was made by WE then they had manufacturing problems so bought the bb's in from a 3rd party this second batch is what gave them a bad rep

G&g l85's (I own and have restored mine) unless they have been converted use v2.5 springs(same as psg-1 etc)