sp00n

still a work in progress, but i am printing this atm Its to allow me to use a 11.1v in my Vz58 compact

If you have a SVD you could get a nsp-3 night vision scope ;-)

on my tippmann since i have had it, something like 9 months, i was initially worried as it heard they shake most optics to bits lol but its been great on my scar 4 to 6 months but i don't run it as much as my tippmann

I use a China clone 556 on my tippmann and on my scar, no problems at all

i have a PDI 6.05 430mm barrel in my g-spec, but i am using a spartan light weight 335mm silencer, with a LRB mod. you can fit a 430mm barrel in a g-spec, but the silencer then just becomes decoration/barrel extension then.

2 more G&P 7.4V 1200mAh 30C Lipo Battery (AK Type) - GP-BAT007A to replace the one i broke

It's the I have the TM vsr g-spec I have. I prefare the vsr to be honest, as there is wayy more upgrade parts available, it's lighter, mags are cheaper and it's cheaper to buy new. But then again my vsr is mancrafted (it's HPA, not Spring powered) so it has a rediculusly light bolt pull, mancraft do not do a kit for the TM l96 aws

It was a comparison to my vsr, which has the AA hop unit, and is set mid way atm. that's with 0.43's, i want to switch to 0.45's soon, so more would be better but in the OP's case its irrelevant for him

there is 2 problems with my TM L96 AWS first there is no upgrade for the hop unit at all, so now fully upgraded i only have 2 clicks left in hop adjustment second there is no mancraft kit for it in my view, like proffrink above me, i would advise going with the well MB01 series, its a lot cheaper, and it has lots and lots of upgrades please not the well MB44xx series is TM L96 AWS clones be sure to check out http://www.airsoftsniperparts.com/identifyyourrifle.htm to check gun/part compatibility etc

On a new gun, if your going to be using HPA you have to convert it (very easy), setup the fps (very easy), and the ROF (which can be challenging, if your going for the sweet spot) Then you need the 3D printed nub, as stock it's not that good ... Also the stock barrel isn't that good I know that all sounds bad, but trust me, it's more then worth it, and once set your gold

Like Hef said, once setup, it's brilliant

At one point ares gears where made of pressed dairy lee triangles The newer ones are ok, or so I hope, I have recently got a vz58

its the Rocinante from syfy's the Expanse, been reading the books, really really like it yeah i know it sucks, but they did start on season 2 in anticipation, as they dont have a huge budget and the special effects do take a long time.

Blasters 0.25's Blaster Devils 0.36's Monkey balls 0.4's and above when they get them in stock Proballs 0.43's Edit :- I did have 0.4 and 0.43 rockets and they was ok, but subsequent batches swelled

i had something similar with my jack'ed SR25 first shot went skywards, follow up shots all dropped short. turns out my regulator was dry and not flowing consistently.

new stuff's Mobius action camera mount (needs painting), and the Rocinante this is very special (well i think so!) its a aluminium 3d printed nozzle for a KWC mini uzi (AKA swiss arms protector) .... why is is special?? ... it drops the FPS to sub 350FPS with 0.2's!!!

Thanks mate, but I have ordered the g&p ones off eBay now lol I'll keep it in mind though, thanks mate

It dosnt regulate pressure, it regulates flow It uses the same bottles. Which are 800psi output, not 3k.

Most bottles (except SLP) have a step down regulator built in and output 800psi, (which is the tippmann running pressure) it has no inbuilt pressure regulator, the fps control is achieved by a grub screw obscuring the air path to the nozzle. Ninja/fire base etc regs all step down from 800psi to what ever you set them too

About 2years ago at a local site to me, mid game, a u18 removed the lower part of what looked to be a solid full face mask, literally 10secs later he poked his head round a corner and took a bb to the face and lost most of a front tooth (it may have been fixed I don't know). He took the lower part off, out of sight of everyone. This person had played before, had sat through multiple safety briefings, it was the first time he had done such a thing. I always wear a lower mesh mask as you never know what can happen

Could be a few parts, first thing to check and rule out is are you fully depressing the trigger until the gun has fired? After that remove the gear box and check the linkage arm isn't stiff or binding etc

The g&p m120 I had got hot ... Really hot, very very fast!!! I swapped to a lonex a2, and didn't look back

Other then leaky tanks etc which is easily fixed etc (lots of info on the Facebook owners page) your cocking arm will thank you!! Also mine didn't like any other shells but TM ones

They use exactly the same gearbox so rof will be the same My raider L's cylinder was ported the same as the normal raider. Barrel length has no effect on range, it *may* improve shot deviation though, a longer barrel can increase fps if the cylinder is ported correctly etc In all honesty, pick one up see how it feels etc