Davegolf

Once you go inside it can snowball out of control, as said the innards are not really deisgned to take more power. Even a straight spring swap to an M95 will wear the sector gear fast. https://sixgunsmithing.com/2018/03/19/why-upgrade-your-tm-gears/ You will only realise big gains in range and accuracy by doing a lot internally, and as most will say - unless its done right it will have a short lifespan comparatively. I would look to fit the longest Prometheus 6.03 barrel in (275-300mm i think) this will give a little FPS boost. A G&G green, or prommy purple (more grip/backspin/hop with less pressure) coupled with an SCS or Super Nub (centres BB in hop chamber consistently) will improve range and accuracy slightly.

I think youre there, the MP7 or MP5 are perfect. There are more experienced Warheads out there, i would educated guess say 31k is plenty fast enough with the 18:1 TBH that combo would be so fast precocking is almost nullified, and as you asy reduced strees for sure.

You won’t really need to mess with the volume ratio as it’s about perfect for 0.36-0.43 standard, just tune the ammo to it. What wasn’t mentioned and I think makes for a very cheap build is the Cyma SR25, the innards are plenty strong for 450fps, so you could spend out on a nice brushless motor if you wanted minimum noise and maximum battery life and semi spam cool running. If not then my ol favourite ASG 22000. Otherwise for me it’d be; Mosfet with Cycle detection and pre cocking, Lonex helical bevel/pinion, sorbo only on cyl head, spring to suit, 60d MR bucking with Super Nub. The other nice thing about battery powered DMR is being able sling it on your back and carry a really useful subgun when moving around or if you’re compromised. IMO the P90 is the ultimate for this role!

I was heavily researched into potentially building up an M110. I know you’re looking hard at HPA, why not make it AEG based? Use one of the models @Crazy_Crystal has said and what the V2.5 was meant for! With helical bevel, the right motor and pre-cocking you can make a very quiet AEG. No not HPA mouse fart but damn good.

Maybe this Heath guy thinks he’s pricing everything in New Zealand Dollars! 🤷🏻‍♂️

All the superior parts causing problems then 😂 I jest, for the record magazine do not need taller gas routes 'for a better seal', all this does is exert excessive upward pressure on the working parts. If i have the right 'bulge' in mind, that is another upgrade for a problem that didnt exist in the MWS - poor BB pick up. So did you modify any of the aftermarket parts to work properly?

@M4ELATR0M so what was causing your running issue?

Def a muppet if he thinks battery voltage changes fps 😆 Did he have a rail gun or something?

No shit 😂

@rocketdogbert i suppose you did, yes. Using my recent AK as an example, actually exact same lengths as OP - had a 300 - fitted a 340, picked up 10 fps, backed up by more joule creep / less energy loss with heavier ammo. Same barrel make and bore, same bucking, hop unit, nozzle, everthing. OP been pretty shy on details so whatever, its pot luck really.

Thats not really true, there are so many variables. If you were sticking purely to the same spring, cylinder type, bb weight, barrel ratio etc etc etc then yes. Most stock AEGS are well over volumed on 0.2s, (for those not aware - this essentially means the BB has left the barrel but air is still coming out) so if you increase the barrel length you will impart more energy and therefor speed into given BB. This is exploited most by GBB as they 'self-volume' thanks to the floating valve. @steverebo i think you will pick up 15 fps (+/-5)

AEG, GBB or HPA? As an average id say 15fps maybe

I am rather excited about this i must admit!

The MWS is actually lightweight, it’s the mags that add the heft, ~450g each. As @rocketdogbert said, the only plus point of the MTR is the ambi controls. Otherwise you want to increase fps over 350 there is no need for the long front end/barrel. If you do want to maximise the MWS platform strong points for ‘reaching out’ then as a DMR they are great. If you like the aesthetics of the MTR then it’s perfectly fine. You also won’t feel so short changed in the round count using as DMR So unless you want the externals/ambi specifically I would build from an M4A1 PS I also acknowledge @alxndrhll comments, although I would say the gas capacity of the MWS is superior and it is a lot quieter in operation. I love the MP7 for its ASBO nature

Hello! The PX4 is not as well built as other TM Pistols, the Gen4 Glocks are so much better than the Gen3 from an efficiency/performance POV. There is no difference regarding reliability etc though. I cannot comment on the XDM, but have owned most others. IMO the best TM blowback pistols are the FNX, HK45 tactical, HK USPs, Gen4 Glocks. 144a is enough in a TM, especially in summer, as the temps drop use of more powerful / green gas is prefectly fine.

I was seriously considering that SVU, very nice and great value! What does your cap moral patch say?

Yeh if they actually aimed at individuals they might have gotten further 😂

Thats summer for you

Like the yanks say… SLLS Stop, Look, Listen, Smell Staying put briefly, and scanning with your eyes rather than looking intentionally the human brain picks up movement much faster, if you think you saw something then chances are you did. Unless you’re well concealed don’t stay put for too long. If you can smell an air softer it’s probably one of those dirty gillie bush twats 😂 Back on original Q, magnification is good for checking ahead 100M, a decent scope will penetrate dimly light areas and shadows. 2-4x mag is good for 60M+ fire, any less and dot sight. So a stacked setup is best, and looks legit seeing as that’s what we all want 😁

No im looking at the plastic nozzle where it loads the BB - front of the gold G&P

Then you shout 'friendly fire' 'check your fire ffs' 'marshal' 😂