JimFromHorsham

Pretty sure the long one you’ve linked for fitting into a Magpul UBR style stock , The short one is just a standard buffer tube set up.

you can see the tops of the magswhere the router exits is different , a little file might help . As you say though could be worth a try for a few quid

ah I wasn’t aware but then again I’ve never had any apart or needed to swap bits over , for reference , galaxy , Gen5 MOS , Gen5

this gas router is all you need I believe https://www.kyairsoft.com/magazine-bbs/we-magazine/we-gbbp-magazine/g-series/aw-custom-vx7-vx9-rmr-slide-gase-magazine-rubber-gas-route.html

You need the “WE MOS Magazine “ as an example https://www.airsoftworld.net/we-airsoft-galaxy-spare-magazine.html

The actual Windage & elevation may be winding / unwinding itself , zero it again and put some witness marks against the adjusters , if they seem to be shifting then zero again and try some low yield thread lock on the adjusters , just a blob on the end of a cocktail stick and dot it over them .

I have the same on mine , no issues with fitment and a good looking replica too

A Guarder slide for my TM G19 from @BADGERF1ST, and just fitted . with flashbacks to the last glock I did probably 10yrs ago I was prepped with the full tool kit , needle files , pry bars and hammers … nope , it dropped straight on and that was that 🙃

My Cybergun FNX duo

Hi Matt , I’m wrong side of 40 too and havent played for around 7yrs now , but prior to that I’d played solidly from around 2004/ 2005 being involved with various teams , travelled to sites up and and down the country and even part organised a few milsim weekenders on my way out the door but the passion fizzled out , I was all in but just felt I wasn’t getting out of it what I felt I should be . But …. My old mate @The Waco Kidis back on the Sunday morning grind and I’m thinking of making a return but this time try to keep my kit whore collecting side seperate from the skirmishing side and just have a bit of simple good old fashioned fun .

Mag on the right is a WA / G&P / WOC or Chinese clone equivalent , not compatible with WE .

if I can do it then I’m sure you’d be fine ,it wasn’t a pain at all , I’ve done a few kits over the years and like all things just get everything you need or want to do in advance and have it all laid out , just work your way through it methodically . A good quality tool kit of micro drivers , parallel punches , needle files etc is worth its weight in gold with these type of projects , trying to make do with “almost fitting” tools usually ends in disaster , have the phone handy for photos as you go also helps for re-assembly .

They do and I’m not sure I said any different ? Apologies if it came across that way . The guarder kit I built was onto an M92f Military , I bought pistol and kit at the same time in 2020 , it is a fixed hop model , although with .25s it gives a very nice straight flight path for what I’d call typical (stock internal ) pistol ranges anyway . My point of “more modern” was that the dolphin kit is at a guess over a decade old ,probably closer to 15yrs , but I honestly have no idea and the donor 92f military that was put into it was the same age . Hope that makes some sense

ha ha, 10yrs ago I’d of said yeah , it’s heavy but heavy is good and heavy is reliable , let’s gooooooo now I’m a heavy old unreliable one so you guys push on and I’ll deploy the bipod

thankyou , the Eotech wasn’t too bad and only a the lower 1/4 ( ish ) of the sight picture was obscured but was in actual fact just a stand in for getting the hop set up , it’s now ready for phase two for some longer range zeroing

WE M14 EBR , a work in progress which I think may never end , but still the coolest GBBR I’ve had the pleasure of owning

Had mine since release , like most I’ve only plinked with it due to lack of mags but I was lucky enough to catch some stock at Impulse101 just after Christmas and snagged a couple more , it was sporting the VFC lighted handguard but now the RAS

the one you saw was a Beretta 92 elite , guarder kit on a TM base .

hi Doug , no , the guarder kit is one I built myself

Good Morning , here is a pretty old custom Tokyo Marui M92f military , it’s fitted with a pretty rare (I think?) Dolphin conversion kit , very unique and gives the pistol full auto capability , I’ve seen references to a Marushin or Maruzen version of the Dolphin but can’t find any reference to a TM kit , can anyone help ? Ive added a pic alongside a more modern TM Military with Guarder conversion kit , Some old school reading links , https://arniesairsoft.co.uk/justpistols/dolphin_real.htm a nine ball conversion kit ( which mine isn’t ) https://www.rainbow8.com/collections/m9-m92f-series/products/nine-ball-dolphin-fs-conversion-kit-tanio-koba-x-laylax-collaboration-for-marui-m92f-gbb Marushin , http://plugfirecapgunsuk.com/PhotoAlbumsPro/USN_M9_Dolphin/#/0 i may well just be acting like a blind man with my searches but any help appreciated , thank you