Jump to content

JimFromHorsham

Members
  • Posts

    765
  • Joined

  • Last visited

  • Days Won

    19
  • Feedback

    100%

Everything posted by JimFromHorsham

  1. The image you’ve used is from an eBay listing that clearly says it’s a Version2 TB for a TM PSG1 , so I’ll go with that .
  2. This advert is COMPLETED!

    • For sale
    • Used

    Here I have two Umarex G36 gas blow back variants , a 36c and a 36kv . both are in cosmetically good but handled condition , neither have actually been “skirmished” but used more for display and handling from a much bigger collection . the 36C is fully working but may benefit from a full service and clean down , I tested this morning and a full mag went through without any issues . the 36KV is sold as non working , it needs a new nozzle and nozzle stopper (I think this is the correct term ) , according to Umarex these are parts “27” and parts “24” , 27 I believe is available but part 24 has eluded me . However you can of course just swap the working BCG around if you fancy a change of rifle . so to be clear , the 36C is working but may benefit from a full strip and clean etc as it’s lived most of its life on a wall , and the 36KV is non working. there are two magazines included , one is holding gas and the other is leaking , I’d asked a friend to take a look and he tried a repair but it hasn’t held, so again magazine 2 is sold as non working either for repair or spares. the KV is currently fitted with the magnified carry handle option but a spare Picatinny low rail is also included. instruction booklets for both plus a parts list print out is included but no original boxes, however both rifles will be packed and shipped securely. I’ve tried to be as concise and open as possible to both rifles but if you have any questions then just ask . im asking £250 all in posted via PF48 for both rifles and accessories seen . no splits and no offers at this stage please . regards jim.

    £250

  3. This advert is COMPLETED!

    • For sale
    • Used

    Tokyo Marui S&W M&P9 / FDE - totally stock TM pistol with 2 extra TM mags , skirmished condition with a few scuffs and holster rub to the slide , I’ve tried to picture this but if you need more just ask . All mags are leak free and the pistol is functioning as it should , might make a good base for a custom build . £100 all in which includes signed for postage and PayPal fees.

    £100

    - GB

  4. I can not find any reference to being a G&P lower specific part (but things change and sometimes retailers forget to update the listing description ) . the best thing to do is contact who you will be buying from in advance , if that’s firesupport then Frank should be able to give you all the information you need for fitting and if there is anything else you need that isn’t included in the kits .
  5. This buffer kit for an a2 style solid stock / long tube https://www.fire-support.co.uk/product/gp-marui-gbb-mws-aluminum-a2-buffer this tube for a PRS style stock or A2 solid https://www.fire-support.co.uk/product/gp-gbb-roller-bolt-with-marui-mws-buffer-tube-long-version this one for UBR style stock https://www.fire-support.co.uk/product/gp-gbb-roller-bolt-with-marui-mws-buffer-tube-short-version this is a standard 6 pos stock tube https://www.fire-support.co.uk/product/gp-gbb-roller-bolt-with-marui-mws-gbb-5-position-buffer-tube-set
  6. Pretty sure the long one you’ve linked for fitting into a Magpul UBR style stock , The short one is just a standard buffer tube set up.
  7. you can see the tops of the magswhere the router exits is different , a little file might help . As you say though could be worth a try for a few quid
  8. ah I wasn’t aware but then again I’ve never had any apart or needed to swap bits over , for reference , galaxy , Gen5 MOS , Gen5
  9. this gas router is all you need I believe https://www.kyairsoft.com/magazine-bbs/we-magazine/we-gbbp-magazine/g-series/aw-custom-vx7-vx9-rmr-slide-gase-magazine-rubber-gas-route.html
  10. You need the “WE MOS Magazine “ as an example https://www.airsoftworld.net/we-airsoft-galaxy-spare-magazine.html
  11. The actual Windage & elevation may be winding / unwinding itself , zero it again and put some witness marks against the adjusters , if they seem to be shifting then zero again and try some low yield thread lock on the adjusters , just a blob on the end of a cocktail stick and dot it over them .
  12. I have the same on mine , no issues with fitment and a good looking replica too
  13. A Guarder slide for my TM G19 from @BADGERF1ST, and just fitted . with flashbacks to the last glock I did probably 10yrs ago I was prepped with the full tool kit , needle files , pry bars and hammers … nope , it dropped straight on and that was that 🙃
  14. This advert is COMPLETED!

    • For sale
    • Used

    A used but not abused WE Browning hi power fitted with black abs grips , gas tight as new magazine but with a few scuffs and marks to the paintwork of the pistol , no box but instruction book included . Genuine Safariland 6004 drop leg holster on desert tan , absolutely brand new with tags , the outer packaging is a bit worn from storage but the holster itself is mint . The pistol is an excellent fit in the holster , almost like it was made for it 😛 asking £125 posted for BOTH pistol and holster , no splits at this time please .

    £125

    - GB

  15. Hi Matt , I’m wrong side of 40 too and havent played for around 7yrs now , but prior to that I’d played solidly from around 2004/ 2005 being involved with various teams , travelled to sites up and and down the country and even part organised a few milsim weekenders on my way out the door but the passion fizzled out , I was all in but just felt I wasn’t getting out of it what I felt I should be . But …. My old mate @The Waco Kidis back on the Sunday morning grind and I’m thinking of making a return but this time try to keep my kit whore collecting side seperate from the skirmishing side and just have a bit of simple good old fashioned fun .
  16. Mag on the right is a WA / G&P / WOC or Chinese clone equivalent , not compatible with WE .
  17. if I can do it then I’m sure you’d be fine ,it wasn’t a pain at all , I’ve done a few kits over the years and like all things just get everything you need or want to do in advance and have it all laid out , just work your way through it methodically . A good quality tool kit of micro drivers , parallel punches , needle files etc is worth its weight in gold with these type of projects , trying to make do with “almost fitting” tools usually ends in disaster , have the phone handy for photos as you go also helps for re-assembly .
  18. They do and I’m not sure I said any different ? Apologies if it came across that way . The guarder kit I built was onto an M92f Military , I bought pistol and kit at the same time in 2020 , it is a fixed hop model , although with .25s it gives a very nice straight flight path for what I’d call typical (stock internal ) pistol ranges anyway . My point of “more modern” was that the dolphin kit is at a guess over a decade old ,probably closer to 15yrs , but I honestly have no idea and the donor 92f military that was put into it was the same age . Hope that makes some sense
  19. ha ha, 10yrs ago I’d of said yeah , it’s heavy but heavy is good and heavy is reliable , let’s gooooooo now I’m a heavy old unreliable one so you guys push on and I’ll deploy the bipod
  20. thankyou , the Eotech wasn’t too bad and only a the lower 1/4 ( ish ) of the sight picture was obscured but was in actual fact just a stand in for getting the hop set up , it’s now ready for phase two for some longer range zeroing
  21. WE M14 EBR , a work in progress which I think may never end , but still the coolest GBBR I’ve had the pleasure of owning
  22. Had mine since release , like most I’ve only plinked with it due to lack of mags but I was lucky enough to catch some stock at Impulse101 just after Christmas and snagged a couple more , it was sporting the VFC lighted handguard but now the RAS
  23. the one you saw was a Beretta 92 elite , guarder kit on a TM base .
×
×
  • Create New...