Krisz

Could be just a dried base seal/fill valve o-ring.

Just make sure you buy the proper version which has hop-up. Multiple different models are out there.

That could be a simple issue like torn hop-up rubber or dirty barrel.

I always look for costumes just never find decent ones. Like a good banana one for example.

I bought the cheapest rubbish from Ebay to mount my ex-fog and ear defender on it and it's still goes strong after years of abuse. It saved my head in certain tunnels multiple times and doesn't matter if people shoot me in the head point blank. Expensive ones are supposed to be more padded and having better adjustability. And ofc different sizes to choose from. Have a look I posted pictures not long ago about mine.

I'd very suprised if your impact would go off on a regular basis outdoor. The whole concept is that you need a hard surface to make it work. I play indoor only but you have to follow multiple rules because that thing is lethal if you yeet it. 🤣 Under arm, defo below waist height, no yeet, preferably you check xy corner/room/etc. before you post it so you don't injure anyone. It's really limited how you can use it even indoor let alone outdoor when you can have massive distances.

Correct. You have to gut a gas magazine for certain bits to able to run it on HPA though. You could tap each magazine as well but no one does it nowadays it's just not an efficient way to play. Grip line is an hpa engine.

Holy Warrior is probably one of the best Eotech clone out there so I'd say it's a good investment overall. For half of the price you could try a Sotac instead.

Yeah. Get the slimmest 7.4v Li-Po for a starter. Solder female MR30 to it. From that point on you don't need the stock adapter because the gun is male MR30. (It's actually called AMASS MR30). I made an mr30 to deans adapter as well so I can charge it from my B6. Your Marui MR30 to tamiya adapter tells you the polarity when you plug it into your battery. But if you search here someone put some nice pictures about it ages ago that's how I did mine. If you did everything right it should look like this. It's a bitch to solder it though at least compared to deans.

ICS CES-P isn't an EBB ofc it's cheaper. Welcome to MR30. It's time to solder. 🙃

Yes but you need a manifold for that. Also, some kind of protective case wouldn't hurt before one of your teammates wrecks it.

Unit is a simple fan which circulates air through those silicon tubes. Speed can be adjusted.

Maybe but it looks goofy. I prefer helmet over anything else but you can set it up as you please. Boonie, baseball cap or even Dye. You can buy that velcro pouch separately. Also, it's worth to mention that Exfog came out with a new version (XT) not long ago so you'd be better to buy that one. Mine is "first gen".

I don't think you can have volume issues on HPA simply because you're gonna have the same amount of air with each trigger pull. HPA is the most consistent system at the moment. It's seems that you found out your gun's limit within green gas pressure PSI.

Velcro or headband.

Join to the dark side and HPA it. 🤣

1. Any 10 quid speed loader does the same job to be honest. Ofc you can spend money on Odin and Odin adapters if you want to. 2. Acetech innovated and innovates constantly on tracers so I'd say yes. 3. Feyachi plus a cap from reddotengineering should be more than enough for now. Later on you can spend decent amount of money on either Vortex or Holy Warrior if you fancy Eotech replicas. 4. No clue I don't use iron. 5. Mine never fogged up those lenses are simply the best out there but you can run an exfog unit on it if you're dead set on i5. Cheek weld is gonna rubbish though so you need some kind of riser for optics more than likely. 6. If anyone did a threaded outer barrel for it it shouldn't be a problem to put one on. That PX4 is quite niche it's not like a Glock or Hi-Capa or other very popular models.

I've built three different custom glocks based on Marui pistols and never changed to aftermarket BBU/piston head/nozzle and all of them have metal slides. Stock marui internals can go forever quite literally. Personally I've never felt the urge to change more than just short stroking and taking the trigger safety out. But my pistols are my primaries in winter season so I want them be snappy with a light trigger pull.

Green gas under normal conditions and you can try and risk red one when it's a few deegres in the winter. There are major differences between PSI if you compare a Vorsk to an Nuprol or ASG. I'd say your average green gas PSI is about 110-120. Nearly all of them has silicone oil that's why it's called green gas and not propane. It keeps your seals and o-rings lubricated so you don't struggle with leaking magazines later on but as other people said that silicone finds its way into your barrel and hop rubber so this is the trade-off.

Not necessarily. The more weight you put on the slide the more you lose on gas efficiency. In this case I'd assume most people would run some kind of optics on it. Probably it takes a few months to get here if you don't want to buy it from Japan or HK. I've got the very old design Gen.3 and the newer Gen.4 and I love them both.

This question could be asked about any brand. 🤣

You can defo use it unless pyros are prohibited altogether. Sites are against usually 9mm and 12 gauge primers because they're way too loud.

Krytac P90's are fitted with ETU and mosfet to my knowledge.

Is that gearbox radiused? It's too late for that though.

He can try to sell it for whatever price but in this economic environment just be realistic about it. Last time I saw this gun here with similar amount of magazines it was advertised for 250. That seemed reasonable.