Misery

nope no sleep at all night shift again XD

oh i will bud its only my 2nd game  XD

 

Cool. Enjoy 👍

Look like you are prepared. Load all your mags tonight and gas whatever needs gassing. Saves time at the game site and let's you have an extra coffee/fag before briefing.

Wish I was going ☹

Regards 

nah i like to setup when im there will be arriving for gates opening at 8 as only live 10 mins away XD so can have the extra cig

ahhh not gd man but real life must intervein with fun times sadly

I am a fairly avid player. Bought it on full release and have put in nearly 300 hours. You can find me on EXD and RIP servers mostly. 

the solution to this is when his gun needs servicing get him to do it

haha already on that so far he has done a motor and gear change and lube also compression check aswell *preshimmed by me him watching though*then put it bk together with me compressing the spring for him,hes quite a techy kid loves building stuff like the pneumatic arm kits ayou get so thought bugger it will see if hes intrested and he was

Changing tappet plate spring on last game! Sod that I would have left it. If you did that at our site the gearbox would have had more sand in it than gears.lol

Did you get any kills though?

I ran my specna arms se-05 yesterday and boy what a performer! Got me 11 good kills.

Glad you enjoyed day though 👍

Regards 

haha it was that or i broke the shotty out but way the enemy were playing i was having to use range so couldnt use the shotty

got a fair few 1 curve shot i was impressed with

we won all the games till the last round of a team deathmatch they did at the end by the end of the first match i could barely run was funny as hell also jumped over a branch only to stumble and face plant it wished my helmet mount had a arrived as that woulda been a golden moment to have caught on film llf

yeah man was amazing cant wait for my next game

 

metal & wood, QC spring etc...

D-Boys stuff might still have a moody hop unit

but c'mon that is a lot of classic AK for tight bastids like me

 

if I was placing a TWG order one them might fall into my basket

cheers @Sitting Duck i may just put an order in once get my ukara as tbh thats when id be ordering the gun anyway dnt want the ukara popo at my door for removong two tone lol

I bought an 028 as a spare rifle.  I was really impressed with it tbh.  It get abused as a loan out gun, still 100% fine touch wood.  

 

Ended up with a couple more, all good, but as noted above, pins are better than screws. 

that was with the maple bucking and soft nub macaron one i think its called

thats what i was hoping bump up the power a little so on .2's its as close to the site limit then with the .28's and hop set for em thats easy going to be in the low 300fps if not high 290's and not over powered imo and the right way to go about it? i could be wrong on that but you guys will keep me right on that i hope lol

 

 

if the gun is under the limit when firing and hopping a .2 then for an aeg it should only go down.

 

however if you build the gun exactly to the limit firing and hopping a .3, then switch to .2's and turn the hop down to match it could well be over.

 

hence a little bit under is better for safety, 5-10fps isn't the end of the world for range but it might make the difference if you end up somewhere with a policy of whacking in .2's, turning the hop off and declaring anything 1fps over as a hot gun.

yeah i get what you mean bud i wil er ing more on the side of caution than anything whith thas dont want to make it hot with .28's ill be happy if its in the 300's

i havent looked porperly tbh but yeah knew it would be something stupid lol.

typical workies hahaha lets hope i dont have any out when there working on my house lool

He probably had it on coffee table next to an open magazine with centre spread of Royal family lol.

If trades found mine they would have to have been looking under bed.pervy bastards! Lol🤭

Regards 

haha probs have to admit theres been few times ive left one on the kitchen table if we have suddenly had to rush out for one of the kids etc so knowing my luck will happen to me lol

 

aslong as u use thin coats it shouldnt cause an issue

 

i wont be selling so ont be an issue for me

Not really in to painting stuff myself

only really krylon'd some clear or two stuff black

 

but DAAAMMMNNNN that is pretty fine job it seems to me

 

did you use airbrush or just cans ???

I got some basic airbrush kits & compressor

but was for a project at work to spray silicone & counter

at counted intervals to keep production machine running

(reducing static build up - fucking worked & fun project)

 

I could easily dig them all out & go nutz

but not my thing really - can't be arsed

 

BUT - credit where credit is due...

 

 

thanks man rattle can almost forked out on a cheapo airbrush kit but i dont do warhammer anymore so would only get used for doing this so just went the tin route made my own stick on camo from sheet of greaseproof paper layer painters tape horizontal one side flip over and vertical the next cut out the shapes and boom u have double side stick on stencils

 

yep right on both counts.

braw just wanted to make sure before i break out the inteli quite surprised the cheap basic asg lipo has kept the 11.1's in balance would of thought it wouldnt of been that great and would of seena  bit of varience in the cells

had to resurect one of my newish 7.4's would plug in and register as a 3s instead of 2s quick 2 second nihm blast then onot a blance charge has seemed to sorted that one put a few cyclesthrough it and seems to be ok will find out through proper use soon i hope haha

i'm starting to get genuinely confused here, how are you being so sensible and not wanting to do even more tinkering?

 

please tell me your secrets

dont wooooory my friend the tinkering comes later only leaving as is cause its for my step son to use lol

never stopped me lol, i have a gun specifically for the task of being the one i don't mess with and it's still had a lot of work done to it

Yeah that is pretty good for a Cyma tbh

they are normally not great, hardly anything

reckon somebody tweaked it when downgraded spring

 

G&G's starters are not brilliant either

 

JG's often have a double o-ring cylinder head

(which is pretty good)

& their std piston head offers good stock compression

 

yeah deans will help add say 1~1.5rps

 

motor is cheap/lame, not even a bearing on motor tower

but it is a £80 starter so can't expect too much

and I've bought a FUCKING LOT WORSE when I started

 

good job squire

 

 

did see what you meant about the crappy nozzles though!!!

 

yeah to begin with didnt think it would of made a gd seal but managed to get it as you saw

yeah have seen alot of g and gs that aint performing right

ahhh nice to know as have looked at a few jg snipers

 

haha yeah is a bit weak i may change that lol

nah i aint just getting it runnign gd for the wee man is main priority

thank you

They all might need a bit of work here n there

 

Never been able to get great compression

from a stock G&G piston with head all sorts of o-rings

(Cyma's are nice with new o-ring)

 

Some manufacturers make a slightly better model M4

& others make a better AK's - Cyma

(Cyma either cheap 028 or 040 series, avoid the cheaper 521)

& both JG & Cyma make decent starter G36's

 

G&G's are nice - their receivers are lovely, even plastic ones

they make nice looking models costing a bit more

boxes are finished a bit better & very TM Compatible

grey 18k motors are like slightly slightly better Cyma cheapies

& if lucky you might get a slightly better blue or

if very lucky a neodym orange ifrit 25k motor

(but usually in the £200 G&G's than the £130 Combat Machines)

 

G&G's with electronic ETU's can be picky for some people

which alas let them down & G&G lost some ground

whilst cheap as chips Cyma upped their game on many starters

at a much lower price - sure they aren't on G&G's level for finish

 

but a lot cheaper & quite robust for such a cheap starter gun

 

but in the end, as long as they go peew peew OK

that will often do just fine for a first gun or backup

 

ya did good sir - well done

One part I never dread tbh...

 

Chrono tells me if my attention to detail has paid off

(some might say OCD)

Or I've fucked it & made it worse

either way I wanna know the fps & rps etc...

even it doesn't always go to plan...

 

I gots to know...

 

SON OF A BITCH !!!!

 

 

i'm with duck on this, short of having somewhere you can shoot the thing a chrono-check is the best way of figuring out issues.

will give it a go at somepoint thanks

 

Here's something a little different.  I rewatched The Hill after about 25 years, stars Sean Connery set in a military prison in north Africa during WW2.  Phenomenal bit of film making. https://www.imdb.com/title/tt0059274/

i dnt know wat it is but there is very few films i can watch connery in lol

haha nice yeah ill be running my sr25 and a bk up m4 XD

Taking my SVD, AKMS and a Glock! 🔫😎👍

Niiiiice!!! will have the combat master aswell

 

just relised thats for v3 gear boxs doh lol

people on YT mess about & find out

then post it in reviews n shit

 

fuck knows what the ETU++ tune is

if he shuts up a bit you might hear it better

 

 

haha thats nuts lol

well the psu plug thingy like what comes free

in these cheap China guns

are not smart type that switch off once charged

and things being what they are I don't trust these free chargers as far as I can throw them

 

(also don't trust mains B3 & any charger with Nuprol on it)

 

so if you got a decent smart nimah charger

or

a B6 & enter details n shit into nimah menu

 

then hunt around for an old charger or lead

seems to be 3.5mm & 1.3mm as I said

splice it all up - positive polarity centre

IF YOU KNOW WHAT YOU ARE DOING !!!

(if people can't use a test meter then stay away from electrics)

 

had to put that in there to warn idiots not to fuck with shit

 

ahem - then charge it up with a proper/better charger

sorted

i have a seperate lipo/nihm charger bud dont use the cheap ones with the guns i also have one similar to this but seperate balance board etc

 

https://www.modelsport.co.uk/skyrc-d260-ac-dc-charger/rc-car-products/447000

that's the correct approach

 

you needed the connector from Action Hobbies

then a power jack

and a bit of common sense - sorted

 

watch out - the black plastic top cap of batteries can come loose

no biggy to reglue it back

 

new AEP stuff...

 

https://www.begadi.com/airsoft-guns/bellow0-5j/pistols-14/electric-aeg-aep-14/cyma-cm-123-gen-2-aep-inkl-mosfet-turnigy-lipo-akku-0-5-j.html#

 

 

old school nimah with iffy charger bastid...

 

yeah just dont wanna spend a ton on the equipment not to like it and loose a bit having to sell 2nd hand rather find something im semi happy with knowing that if i get the better one ill have a better experience if that makes sence lol

Yeah my only thing is finding something that good quality. I know it’s only airsoft but you are still moving about and using it so I begrudge paying for something that will break. But I guess it can happen if you spend £50 or £500

hahaha aye its a minefield lol

that we shall that or duel it out with pistols wild west style

 

ok as of 1:08am there in the uk now to wait on them clearing customs lol

I just can't wait to go and be there. My local has some seating and drinks etc, I just wat to go and chill for an hour.

nice so will this one they have recently moved to a new unit with a 40m range etc aswell cant wait for crap to go bk to normalish lol

exactly for all they knew it could of been on its way out as it bent a piston rack last outing and would still fire so imagine iot done that again and they fired the whole mag the damage would of been more than just a rack and gaurentee they wouldnt of paid for the repair. would of been the shouldnt of left it there then

 

or (as has happened to me, with a gun i'd willingly lent a mate) the motor height backing out, fortunately there was no damage but didn't stop him bricking it when it went far enough to stop firing.

 

something you'd pick up on if you knew your own gun and how it sounded, but not something some rando will get (experienced or no) if they've just picked it up.

 

also for all he knew the mag might have been stuffed with .48's and he'd just send £10 worth of ammo downrange......

haha yeah i willingly lent my stepson my m4 and he well nearly snapped it in half thought hed bent the outer barrel or ripped the nut off the threads but luckily had just come loose  XD

 

agreed as no gun sounds same

 

exactly bud! was .32's but like said i aint bothered bout the cost of the ammo just in my opinion and like assholes we all got em that its a dickish move to just pick someones gun up that u dont know and think its alright to use it