leadly

I haven't been to a site that corners you into buying theirBB's yet, did they stock every weight imaginable? I think i'd begrudge having to buy bottles of varying weights each time I went to a site like that, and i'd definitely be put off going back as well. Was this "rule" mentioned on their website at all?

@eddie-biggs Apparently high pressure Airsoft have some mags in stock at the moment!

Haven't seen any places with stock of MTW mags for a while. I've been using £10ish nuprol mid caps with absolutely no problems whatsoever. Although last Sunday I busted out my new shiney PTS EPM1's and they were faultless. I think some people have feeding issues with "excessive" rate of fire but my two mags and my mates two mags coped just fined! Got 4 mags for £100 from Patrolbase.

I've not used anything lower than 0.32g. I can hit a confirmed 60m tree with ease. I'm just experimenting with 0.36's at the moment to compare the difference at AEG FPS Vs DMR FPS with my mate. We both run 10" MTW's. Hope that helps!

I've seen them side by side, bar the colour, they are identical!!

It's a tricky one picking the right weight isn't it. I've only used 0.25's in my AAP SMG but that's because that's the max weight allowed at the CQB site I use it at. I'll hopefully run it a Gaol for a few games next month along with my MTW. There aren't that many long drags to need the heavier weight so I'll see how far 0.25's will accurately go. If in doubt I've got a lot of 0.32's in stock. So I'll either use those or just have to get closer to the baddies!!!

That's my mates site. All of it was pretty much sold before it hit his website. Another order going in soon though I think. Hopefully the next one turns up first time. The last order went missing twice!!

I've got a couple of the WE extended mags that work well! Never had any issues with them, however they haven't seen much use!

Tap that ass!!!

I can only assume that when used with just the pistol the drum mag could be a bit cumbersome but on my AAP SMG it's weighted just right!!

Brilliant! Reloading is soooooo overrated!!

It's because people like the customisability and versatility of it. The amount of time and effort people put into making and sharing their own designs and products, most of the time for free is quite staggering! Plus it's a cheap £80-90 pistol that can quite easily (using readily available AA parts) be turned into essentially a DMR with full Auto capabilities. I know most people own more than one of them (me included) but you could use just the one pistol as a DMR in the morning, rebuild it into an SMG after lunch and then use it at a pistol by just whipping off (or just folding) the stock and use it as a secondary. I do understand your point totally, but why do we do any of it? Why do we mooch about in the woods or abandoned buildings shooting eachother? Because we can and because it's fun!

I've read that the hop unit is quite clunky in adjustment. They bought out a O ring to fit on it so make the adjustment a little more finer. I'm sure my mates got one and he said you still have split the upper to adjust it. (Although I just lock the slide and use a small screwdriver on the original hop). Adjusting the CNC will be more difficult with the stock fitted as you'd need to remove it to take the upper off. Not first hand experience or advice so may not be 100% accurate.

I used the replacement AA one that Airsoftworld stock. In sure I put a screenshot of it in an earlier post!

Just bought a brown KMCS 3.0 from Empire Airsoft. Very impressive service, the suit was with DHL about 15 minutes after purchase! Should be here tomorrow!!

Both looking very smart @Skara I can also vouch for the sturdyness of the folding stock @Shaydee, well worth the money!! I used my AAP SMG for the full night on friday at my local CQB site. The frame on my beloved Hi Capa cracked when i was setting it up the night before so i didnt want to risk further damage. After getting over my sulk from my scope battery dying ? I soldiered on and had a great night. I've got a woodland game at Phoenix coming up so the AAP SMG will stay at home. My AAP pistol will get an outing though. Then i've got Leicester Gaol in September, will probably use a mix of MTW and AAP for that.

A Dye I5 mask! Go on judge me, i don't mind!! My revision bullet ANTs fell to bits and after a new CQB site opened up 15 minutes away from me, I needed a new fog free option. Tested it out on Friday night, comfortable to wear and no fogging!!

I can highly recommend the Waldon short stroke kit and the nozzle return spring! I kept the stock barrel but upgraded the rubber on my AAP SMG to a Decepticon 50. Stuck an Autobot 50 in my woodland one. Atleast i think it was a 50.....

Well I my love affair with my Hi Capa was short lived!! Played Friday night with my AAP SMG and wow, loved it! The new trigger has made follow up shots a lot quicker, especially with the uprated springs and short stroking. Ran it with my HPA tapped drum mag. I did use my Hi Capa after a few games, until they turned all the lights out for a "night game" and the AAP SMG had to come out as I'd slapped a torch on it!

Some decent footage of the Tac-41 here!

You can't trick me, I see that milk!

It's the way forward! When I got my HPA kit my mates were like "neah, never going to HPA my stuff, the lines too obstructive" fast forward a few months and it's "oh what kit did you buy?" ? Main reason being my mates SMC runs stupid hot and he can never use it. Managed to bag some white gas and decent weather to use it once at Anzio and that's it. Unfortunately though, all the regulators are out of stock and most of the tanks.

Tonight's job, should I get chance, is to HPA tap my drum mag and get that set up for around 300fps. Already managed to get my tracer to fit inside my KAC QD supressor so I'll be good to go. Plans are first few games with the AAP SMG then finish the day with the Hi Capa.

ITS ALIVE, ITS ALIVE, ITS ALIVE!!!!! Turns out it wasn't firing at all, the hammer spring leg had slipped out of place and one of the others wasn't located correctly. All a learning curve that I quite enjoyed, but don't wish to have to repeat anytime soon! https://www.instagram.com/p/CQ4ad5FjD-F/?utm_medium=copy_link Here's a quick video of if firing and a rough set up of the trigger tension I've set. Loctite pending. Also chucked in some Waldo Customs bits. Snappy boy recoil spring and buffers (still get lock back) Lil snap nozzle spring Then some lovingly applied Waldo gun lube! Will test it out on the 9th at Hells CQB!