leadly

Out of stock at High pressure. If you manage to find any let me know as I think I need one!

I've been looking at them but was concerned about the BB capacity. The Tapp was is 1500 but will I ever need that much in 1 game?

It's all @Steveocee's fault! 2 Hadron H keys ordered, along with an Autobot 50 for my "pistol" and a Decepticon 50 for my "cqb pistol with stock".

@Steveocee You've gone in two footed now haven't you!!

I'm running both of mine totally standard. I do intend on getting a couple Autobot 50/60's to have just incase I want to tinker. I've only used one as a side arm when my M.E.D got breached, but hopefully after we can play again I'll use one as a primary. There's a new CQB site opening up in Sinfin, so I'll get test it out there at some point!

The camo pens have been out!!

My 2nd pistol arrived a few days ago! The camo pens have been out!! I'm pretty chuffed with how it came out, time will tell how well it lasts!

Hey guys, I keep on seeing people on Facebook and Instagram selling 3D printed short stroke kits. Some sell just the spacers, one website sold the spacers with different rated springs. Is it wise to change anything else when short stroking other than just pop in the spacers? It's not something I'm dead certain on doing, just curious really as to any negative effects, excessive wear etc. Cheers

I've purchased another AAP-01. This time in tan to make slapping some camo pen on it a little easier.

Airsoftworld have just added loads of the two colour pistols. Just picked up a 2nd to camo pen up!!!! So I'll be sticking an Autobot in and using that as my "oh shit" pistol when sniping. Then my black one will have the stock fitted and my 3D printed supressor / maybe a tracer. This will be my running around fun gun, with extended HPA tapped mags inside it!!

I've heard the fire selector is very poorly made. There's issues with screw alignment and holes not being tapped out very well. Someone on the Facebook group said they were on their 3rd one as they keep breaking. I nearly got one myself but decided against it after reading what I had. Plus they don't work with the stock on so that seemed a shame!

My Lee's precision engineering adapter came today so I can fit my MK23 silverback supressor to my MTW!! I'm quite pleased with how it looks! A bit different to the KAC one I've been using! That can be my CQB one ?

Any idea how heavy the scuba tank is? Go-dive have go 20ish % off most things including tanks at the moment! It's payday on Friday and I did a lot overtime!!!

Either sell the tan one to me or run one as a pistol and one with the stock etc. I'd obviously prefer it if you sold me the tan one! It'd get a lovely camo pen job and my black one can keep its stock on full time.

I know I shouldn't like it but.......

My most recent purchase! A Wolverine MTW 10" Forged edition. After a bit of swapping about between this and the Milspec, I opted for this in the end. Will make a build thread at some point!

My mate Dayne has got the hop chamber, I was a bit gutted to see that to adjust the hop you still need to hinge / remove the slide. Dosn't really seem worth it. I don't think he's tested it much either. Ordering a drum mag for my MTW soon, should fill a void while I'm waiting for a restock of tapp Glock drum mags.

Patrol base had a re-stock today but I resisted on getting a second one. I've just sold my ARP9 so now I've got a drum mag shaped hole in my life.....

I see, I have learnt many things! My plan was to run it at 1j or just below and use something like 0.25g BB's. I shall whack a Nov modular supressor on the end of it for maximum ssssshhhhh. I've got loads of different weights to okay around with so we shall see what I can achieve. I'll make a project thread when it's in hand!

Obviously I'm quite new to the sport and HPA so I've not come across this before but why the limit for HPA users? The BB dosn't know what's propelling it and I could just as easily use joule creep to cause maximum pain with my VSR. (Recently lowered the spring to avoid having a 2.8j RIF when firing 0.46's.)

Yes, from what I've seen in the Facebook group the ejection port cover stays open but apparently you can reverse the spring and do something else to make it stay shut My mates ordered 7 MTW's in total, so I've got the pick of either the 10" Milspec, 10" or 14" forged. At this moment in time I'm 90% certain I'm taking home the Milspec. After going back through all of the posts on Facebook, people seem to only have issues when they try 3 different hop rubbers with 5 different barrels in 4 different hop units and then after that it's trigger micro switches breaking and programming modes going all over the shop. I'm sure different issues will pop up with this new gen but I think I'll be more than happy with semi only. If I need full auto I'll just whip my AAP-01 out! Not paying full retail makes the decision jump head first into HPA a little easier!

Hopefully should debut it for a few games at Skirmish on Saturday if covid allows. Failing that I'll try get up to Matlock instead and give it a whirl once I've tested my VSR out in the morning.

Mine arrives on Tuesday....

? We won't get banned for liking Mustang will we? I don't own any KMCS concealment systems.....honest! The supressor needs a drill running through the middle to make more uniform as I had a few flyers from it! Vertical grip is also off so I can holster it. I have a feeling ill be chopping and changing the form of it dependant on need. @Skara I've got my eye on a second one as well, just so I don't have to keep on taking bits on and off. @AlphaBear You literally use a flat blade screw driver (a special tool is available) to unscrew the filling valve on the bottom on the mag and then screw in the corresponding HPA valve. A little bit of PTFE tape helps seal better. I had to make the holes on the plastic base plates a bit bigger with my Dremel but other than that, really straight forward. Maintenance wise, I'll probably put the original valves back in and fill with some abbey maintenance gas when not in use. Damage to the RIF wise, if you don't turn the pressure all the way up and try not to dump mag after mag on full auto then I don't see it causing any additional wear. Although I'm a noob to HPA so I could be wrong?!

Oh gosh, that does look lovely! Picked up my HPA tank last night and tapped some mags! Set to 90 p.s.i, getting a steady 330 FPS with a 2/3 FPS variant. I cannot wait to use it on the 5th!! Was chucking some .32's don't the garden last night, on full auto it's like a hose pipe!!