SSPKali

Mine had wound off the hop for some reason so I had to reset between games. Accuracy out beyond 30m was a bit lacking so I might have to check the barrel is clean and the hop rubber not torn or something daft like that. Other than that I was hitting peoples hands as they gesticulated to their team mates 😂 EDIT: cleaned barrel and still struggling to get sub 4” groups at 15m. Took out inner barrel, hop unit, inspected and reinstalled. Now sub 2” groups with Amoeba Precision 0.30g (and even better with the Guarder 0.36g!) meh

Attacksense is a cool system but if you don’t need all the bells and whistles you can build your own using Raspberry Pi / Arduino and some basic coding. Targets can be built out of 3mm lexan for not much money and you even get to choose the colour of the LEDs.

I have a clone Unity riser so not an issue blocking the sight line 😂

Inforce WML mounted at 12oc right at the front of the rail. Ambidextrous and low profile 👍

The old one from my MWS has 2 ridges, probably 5years old. Will check the newer ones I can check later in the week.

Had a couple spare, possibly from Impulse101 last year.

Have a spare nozzle spring as these can fatigue and break. Eagle6 has videos on how to disassemble/ reassemble. A spare nozzle is also handy to have, TM, G&P or Dynamic Precision seem the most reliable. Dab of loctite on the Phillips screw at the end of the buffer tube, you will need a long screwdriver. Welcome to the MWS club!

FPS variation was down to worn nozzle…new TM nozzle fitted and mags now within 5fps of each other🤷🏽

Replaced the two lower ones and all at the same fps now. Old ones were pretty worn (5+ years use and a couple had small rips in them) Bolt slides smoothly over them with no hang-up and cycles and loads ok. Compared to mag #7 (purchased last year and only used a couple of times) the Guarder are the same size…just not as knackered as the other 6 mags worth!

Now replaced all gas routers and two of the mags are well below the others on fps (230-235 vs 243-253) Need to try the two spare routers I have to see if that brings them all in line. I don’t mind a few FPS difference between mags but 25fps is a bit much and might make chronoing tricky! (Make sure I use the “faster” mags!)

Guarder

Replaced the gas router on one of my mags, I bought them second hand 3 years ago and they had been well used so probably due replacement. I chronographed the gun before (263-267fps) on ASG Ultrair and 0.30g Once the gas router was replaced I tested it again…now 299-305fps! Turned down the NPAS and all is good again. It is definitely snappier and more recoil, I guess it is all going into moving the bolt and not leaking around the nozzle. The other 6 replacements from FireSupport will be here on Monday so I guess that is a couple of evenings next week sorted 😁 Mag now marked up so I keep track of which I have done!

Me to air soft manufacturers:

They were GG modded by previous owner. I am careful not to over fill as I know a gas expansion area is needed

Been using it for 2+ years (thanks to the perpetual sale from PB!) and it runs great! Able to fill mags no problem (10-12s) and get ~100 shots from them (cary a speed loader for intense games!)

Think it was about 30 a side. Probably perfect numbers for a skirmish day. When it gets to 50+ a side neither team can progress. About 70% had never played there before either so regulars were at an advantage

Now fixed 😂

Great day at UCAP VENDETTA running the TM MWS and SADF chest rig. Quite a few new-to-site players but the sides were evenly matched and every game a good match. Got some good kills in and ended up with only a few bruises. Was fun to show some n00bs around and lock down the hospital or clear out C wing.

Fugly grip was great, nice angle and secure hold. I am in love with the SADF chest rig…even fully loaded I had zero neck/shoulder/back issues. Shame I was still recovering from leg day 😂

Tomorrows minimal load out for UCAP VENDETTA. TM MWS, Vortex red dot, Inforce WML, Ferro Concepts slingster. Genuine SADF M83 chest rig - 4 mags, Impact BFG, timed BFG, M4 speed loader, spare 209 primers and tools, phone. Comfy even with all that weight.

Nozzles, nozzle springs, gas and BBs are all consumables in the MWS world. As C-Diddy says treat it as a classic car / high performance car and accept a level of tinkering, with what is ultimately a toy. At the end of the day there is less to go wrong and when it does it is easier to fix than an AEG with the bonus that some POS Lipo isn’t going to self-immolate at a random point 😂

I had an older DP nozzle self destruct, this was an older shiny (and brittle) plastic. Newer ones seem more of a matt finish and currently out living the previous one. I would look to grab 2 or 3 TM ones from FireSupport / Eagle6 / JKarmy who ever has them in stock. Happy hunting. WTF? Exploding mag?!

Function > form

MWS is pretty much steady state now. G&P NPAS seems a better fit than the usual RATech black and the Inforce WML is a nice ergonomic light. Recent purchase (from nwcustomparts) is an Ergo grip Tactical Deluxe Chonky Boi 3000 (or something, IDK) If you have big hands and find regular grips too small and trigger pull length a little short I would take a look at these. Hefty palm swell and subtle finger grooves makes sure that your hand is “indexed” without the grip forcing you to hold it in one way only. PTS ERG for scale (you) vs the grip she told you not to worry about 😂

Tolerances on it were good but I think the dirt and burrs along with zero grease was meaning that it moved sluggishly and didn’t impart enough of a blow on the primer. I still need to find a replacement ball detent unit (probably 3mm dia over all!) to ensure good indexing of the twist part.