strykerles
-
Posts
655 -
Joined
-
Last visited
-
Days Won
1 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Posts posted by strykerles
-
-
I use this for all my mags, just hold onto them as you wind
https://www.thecageairsoft.co.uk/airtech-universal-sidewinder-adapter-odin-m12/
-
I've got a cyma V3 gearbox I got from a boneyard gun if you're interested?
-
This is from a while ago, not mine it just sticks out as an abomination
- Shamal, Tackle and Skullchewer
-
1
-
2
-
E&L for quality, dboys for budget
then again I have an ex rental dboys ak74u and it's never missed a beat and it's been battered
-
my local cqb site has been rebuilt 3 times in 5 years. it's a pain learning the layout again 🤣
-
Also that they can put team bands on their legs where they can't be seen, makes it very difficult to find them
-
-
depends on how many you're talking really
I know extreme airsoft do packs of 25
a quick google search brings up some that do 500s
-
Just had a look around and can find feck all aswell.
Does it work? what color laser is it?
-
9 hours ago, Dan Robinson said:
Think I'd rather look at that bubblegum capa, and that's ugly
- Dan Robinson and Nick G
-
2
-
Keep an eye on those teeny tiny springs that will inevitably fly off into the ether never to be seen again
Also magnets.....
-
Maybe unscrew the board so you can apply some heat with it out the way?
How well does the hop unit work btw? I have the Dytac SLR which is the older model but identical
-
West midlands airsoft in Rowley Regis and Ace airsoft in wolverhampton
-
it can be a tricky as the nozzle return springs are tiny and easily bent. I'd buy some spares just in case. Got mine done by a tech to save the hassle
Another known weak point in the mp9 is the disconnector which is made of cheese, wiitech do a steel upgrade part which is worth getting too
-
yes you can change the valve in the nozzle, did it with mine and its fine now at around 320fps
-
does it slide on at all? if it does then the part that locks may need to be opened up slightly to allow it to go all the way on
-
if you don't mind from abroad
I use this one a cyma VSS, this isn't where I got it as it came with an ak I brought
https://www.amazon.co.uk/Tactical-Scope-Mount-Picatinny-Weaver/dp/B07DL3HZ3H
-
@ak2m4 nice 1 thanks
-
Will these motors be coming in the short shaft variety for us V3 users?
-
-
I have both and there's not much between them in terms of brightness.
For green bbs they are both spot on, although I've never tried the bifrost with red bbs
Xcortech have 2 versions of the mk2, one for red bbs and one for green bbs. they will light up the opposite color but not as brightly
also the xcortech uses a micro usb for charging and the bifrost uses usb C
I've heard very good things about the acetech brighter C for green bbs and it's a popular one at the site I go to regularly
-
It may be threadlocked on, try heating it up and then try remove it
- AttackBunny and Rogerborg
-
1
-
1
-
I did a little digging on this before when i got 2 quake 8s
In my quake 8 it's more about the grenade I think. I loaded one with 616 and one with 615 and when the grenade landed upright I noticed no difference
landing on it's side the grenade can be erratic with either. thrown with a bit more force on it's side it still went off 90% of the time
I think the 615 might have gone off a few more times but can't really remember as it was a couple of years ago
I tend to use 615s now so i think that was my conclusion 🤣
-
Mad scientist aka Andy at West midlands airsoft based in Rowley regis near J2 M5
LCT VSS Issues
in Electric Guns
Posted
if the hop is fully on then the nub is pushing in too far for the bbs to get past, same thing happened with my cyma vss
looks like you may need to trim the lip on the rubber to eliminate any potential bbs catching on the lip
I used an asg ultimate m130 on mine and it fired out at 562fps on a .20, did the same thing as you and fitted a titan plus 18:1 gears and new compressions parts. standard V3 hop unit with ML 60, omega nub and standard 400mm inner barrel. changed to a m120 and dropped it to 490. with hop applied it fires .43s lovely and straight
I believe the battery goes in the suppressor on the LCT? on the cyma it goes in the stock, could the battery be pushing on your barrel maybe even with the spacer?