Danhc92

Finally finished my Hi capa and TM MWS and I’m loving the looks of them 
 
2 separate posts with parts list below 😁 
 
Base - TM MWS 
Stock - magpul CTR 
Buffer tube - Airsoft artisan 6 position tube 
Buffer - G&P buffer v2 
Sling mount - T8 QD sling swivel plate 
Grip - magpul MOE K2 XL 
Trigger guard - REVANCHIST trigger guard 
Mag release - REVANCHIST mag release 
Charging handle - Angry gun airborne ambi
Rail - angry gun MK16 MLOK 9.3” rail 
Outer barrel - angry gun L119A2 10” barrel
Inner barrel - Laylax 250mm 6.03 
Bucking - cow cow 60 degree bucking 
Hop arm - Laylax hop arm 
Optic - VORTEX crossfire 2 
Pressure switch - WADSN dual pressure switch
Torch - WADSN M600C 
Torch mount - WADSN Thorntail MLOK mount
DBAL - WADSN DBAL-A2
Suppressor - angry gun SOCOM556 
Mags - guns modify 35rd mag x5 
Hand stop - PTS hand stop 

the hi capa 😁
 
Base - TM hi capa 5.1 
Magwell - LA capa customs V2 defender 
Grip screws - LA capa customs V2 ‘S1’ screws
Hammer - LA capa customs ‘HIVE’ hammer 
Sights - AIP fibre optic sights 
Slide - Airsoft masterpiece custom X-2 slide 
Outer barrel - LA capa customs ‘tornado’ threaded outer barrel 
Blowback housing - EDGE custom blowback housing ver 2 
Bucking - maple leaf autobot 50 degree 
Nozzle spring - AIP 140% spring 
Nozzle - AIP reinforced nozzle 
Hammer/recoil spring - AIP 140% spring 
Guide plug - AIP guide plug 
Guide rod - LA capa customs duralumin tornado 
Hop unit - limited edition HCH x Nexxspeed TDC hop unit 
Inner barrel - nine ball 5” 6.00 power inner barrel 
Trigger (not installed) - Nexxspeed CNC speed trigger 
Tracer unit - Acetech bifrost 
Torch - nuprol X300
Thread adapter - LA capa customs reversible thread adapter 

Is there any damage to the front of the nozzle? Sometimes the square bit at the front of the bolt bends upwards which causes jams.
 
You can gently heat it and bend it back down if this has happened.

pretty sure they will be fine with a tonne of plastic bb hits...

They most likely add it because it sounds like it should be a good idea, which doesnt neccessarily mean it is.
 
Speaking from experience of using dry propane, I very rarely get a leak, my MWS mags for example have never leaked in the past 3 years that I have owned them.
 
Occassionally when a mag develops a leak which is a very rare occurance, I strip the mag down, apply a small amount of silicone grease tp the seals, heat them lightly with a heat gun and reassemble the mag.
 
I would not advocate the use of maintenance gas inbetween games, its a total waste of money and you are more likely to do damage venting the gas each time you change over. (Freezing rubber is never a good idea)
 
As for the adaptor, always go with a genuine madbull one, they are available on ebay and work flawlessly. The cheap clones are pretty hit and miss.

They most likely add it because it sounds like it should be a good idea, which doesnt neccessarily mean it is.
 
Speaking from experience of using dry propane, I very rarely get a leak, my MWS mags for example have never leaked in the past 3 years that I have owned them.
 
Occassionally when a mag develops a leak which is a very rare occurance, I strip the mag down, apply a small amount of silicone grease tp the seals, heat them lightly with a heat gun and reassemble the mag.
 
I would not advocate the use of maintenance gas inbetween games, its a total waste of money and you are more likely to do damage venting the gas each time you change over. (Freezing rubber is never a good idea)
 
As for the adaptor, always go with a genuine madbull one, they are available on ebay and work flawlessly. The cheap clones are pretty hit and miss.

You shouldnt be putting oil in, I've run dry propane for the past 11 years or so and refilled my tanks from a calor tank. It has saved me a fortune and makes the gun more consistent.
 
It doesnt break your mag seals, and just requires you to apply a small amount of silicone to the piston cup in the blowback unit every now and then when you are cleaning it.
 
MAPP gas should be used in the winter when its alot colder, my MWS kicks like a mule on it, even in the coldest of weather.
 
You can also refill the MAPP gas cylinders with propane once they are empty.

One thing i would recommend is the silent fill valves for the mags. Only a couple quid for 5.

bit of a work in progress. Fitting LED's and laser to the TM Curve pistol. LED's work but the laser is giving me grief. Need to redesign the push button as the grey one on there now was just to get things working.

Angry dad “ you just shot my son in the head!”
monkey “ doesn’t count Cus it’s not an air gun!”
armed police man “ get on the floor and put your hands behind your head fool!”

Technically it isnt fixed hop, even though they do advertise it as fixed.
 
If you push the metal hop arm towards the front of the gun, it increases hop, push to the rear and it decreases it.
 
You can also bend it to increase hop. Mine us currently easily overhopping 0.3g bbs with the hop set to around 70% of its travel.

Technically it isnt fixed hop, even though they do advertise it as fixed.
 
If you push the metal hop arm towards the front of the gun, it increases hop, push to the rear and it decreases it.
 
You can also bend it to increase hop. Mine us currently easily overhopping 0.3g bbs with the hop set to around 70% of its travel.

Does pushing the trigger forward reset the sear? If so, its normally its due to dirt or burs on the sears.

I got my MWS some time ago, must have been a freshly hatched one, was quite small ...

 
Read all 228 pages here (yes really) and found nothing about small MWS (except for some guys rebuilding theirs into short ones)
 
Didn't want to send it back, so tried something:
 
IT WORKED (insert evil scientist laugh )

(don't know why picture is upside down)
 
Asking permission to join this exclusive club.

 
Had not thetime to go out and play yet, but while reading this thread the MWS has quite grown on me 😁 (ok ok, I'll let myself out)

Arktis have a good sale on for black Friday if you want some more obscure camos like Swedish M90 or even high-speed modern DPM kit.
 
https://store.arktis.co.uk/collections/sale-clearance

Their C222 trousers are a great price
I wish they had the Swedish M90 in my EFB size! 😩 

I've found the RA-Tech nozzle and barrel to be good investments. The barrel have great accuracy and the nozzle has lasted 6 years now. The RA-Tech bolt unfortunately was way off spec and needed a fair amount of material sanding off the receiver to get it to cycle smoothly.
 
Mapleleaf buckings are great with the metal c ring which helps seal and grip the nozzle. I chose 60d for 450 fps, if you are running it sub 350 the 70d will most likely be too hard, 50d will probably perform better.
 
I would recommend getting a proper scope that is rated to recoil, Mine destroyed 2 scopes before I switched to a vortex.
 
 

The PSG1 finally arrived, Bloody hell its heavy haha 

Still a retarded design by TM