MalcyFett

I’ve had a good few months away from Airsoft, on my return I’ve been advised that the usual sites my chums visit have BB weight limits now for outdoor sites. Gunman, GZ and UCAP all saying max weight of .32g on HPA/AEG/GBB. I generally use .32 anyway, but curious if this is now the norm for most sites.

+1 on the Howard Leight Impacts. The more Gucci headsets will have an attached mic, but if you're looking for ear pro only, you can't go wrong with the Howards.

Finally got my hands on a TAC41. New scope to follow, for now I’ll use the scope that’s normally on the MWS. Please ignore the RMR, I’m too lazy to take it off ?

I’d stick with the 100N if your happy with it @Rogerborg. I’ll give @PopRocket123’s suggestion a go later. Stock spring goes back in fine, even with the biggest tensioner. But I’d doubt that alone will give me the fps I’m after.

It’s not that. I can’t get the cylinder head to go on. It’ll work fine with the stock spring, but the rapax doesn’t seem to want to compress enough. I guess I’ll try cutting it a tiny bit, it feels like the spring is just too long.

How did those with rapax 2J manage to get the spring in? Is there a knack to it? Im struggling to get mine fitted.

Yes buddy. I used to be in the 501st Legion before Covid. Not really gotten back to in since though. Gotta love those Star Wars load outs though eh? ?

Dave told me off last time I mentioned my AG drop in nozzle, but the one I've got is holding up ok currently (approx 2k rounds in). I should add though, once I can find somewhere with either the TM or the GM in stock, I'll be swapping over.

Had the same thing happen to me with my MWS, after 500 rounds the nozzle broke. I couldn't find anything to replace it with at the time apart from Angry Gun (I know the QC of AG is a bit dodgy, but at the time there was no alternative stock). I'm 2000 rounds into the AG drop in reinforced nozzle, and "so far" it's working a treat. Maybe worth a go if the other ones keep busting?

Had a good day at Spartan CQB in chippenham yesterday. Morning started with around 50 people, at least 25 of which were rental players. As per usual with rentals, we were finding a LOT of folks not calling hits. Marshalls were really good at enforcing it when they saw any issues, so much so, we could constantly hear "you're hit", "you're hit" from the Marshalls. After lunch gameplay was spot on though, 20 of the rentals left during lunch. We were down to around 30 players, suddenly everyone was calling hits, play was a LOT better. All in all a good day.

A good find. Sounds like it'll be almost a drop in fit (if I'm lucky)

Has anyone here used the g&p SPR front end? https://www.fire-support.co.uk/product/gp-spr-full-front-set-kit-for-marui-mws-gbb How hard are they to fit, compared to say a Mk18 rail?

Took out the mws to clean it. Found out why I was having issues. Luckily I’d bought an angry gun full nozzle kit. Removed the old tm one and installed the AG full nozzle kit. Only issue is I couldn’t find a firing pin o-ring on the TM one. When I tried to fit the AG one I couldn’t get it to fit with the AG o ring. I’m assuming it’ll be ok for my next game (This Sunday), but otherwise should I source a thinner o ring, or will I get away with leaving it as is?

I've been there, only the once though. Site is set in a valley, with a lot of paintball arena style kit about. Big bridges and suchlike. Pros - Covered safe zone, proper toilets (with power and everything). Pizza delivered to site for lunch. Really well organised, games were well varied and thought out, marshalling throughout the game I found to be on the whole (however, see below) - good. Cons- Possibly harsh to blame the site, I don't know, but when I was there we had a ND with a loaded gun. BB just missed my mates eye. There was a rebriefing to everyone, followed by a warning that the next ND would result in the offender kicked off site. Less than 2 mins later, another ND. Offender was not even told off this time.

Took the MWS out today for it's first game since I've fitted the new Brass nub. I found I wasn't able to reach out as far as my MP7 GBBR. Tried .36 and .32. running predator ultra, at 250 fps with the .36 neither were working well with max hop on. Is there something I'm missing/not doing to achieve at least the range of my MP7? Everything is stock inside, except for said brass nub.