Asomodai

Nice M4
 

Nice M4
 

Nice M4
 

They are very rare especially in this country. Your best bet is to get one imported from Asia. 
 
As a new person to Airsoft I would recommend getting an AEG rather then a gas gun. 

Tiger111hk. 
 
It will only fit the PPS Bizon or E&L AK though. It's a 5mm pin. 
 
I already have a top folder on my PPS Bizon. Just wanted a spare.

Spare PPS Bizon Top Folding stock. 
PPS Bizon Flash hider
Core PN-2 Charging handle cover

They are called retainer clips. You'll need to measure the shaft that it connects to though to get the right size
 

Looks like they never re-opened after the second COVID lockdown. I believe they lost a family member who spear-headed the whole venture. 
 
A real shame as the owned the land and were passionate about it. 

Backup and you don't want to upgrade?
 
TM all the way, they are reliable and the "Loss" of a metal slide means it will work in all but the lowest temperatures the UK has to offer. 
 
The main issues with the AA stuff is the crap rubber seals they use in the pistol itself and especially the mags, a few people I know have replaced all the rubber stuff to prevent gassing out. Take the cost of those upgrades and you might as well of got a TM. (It will still perform poorer due to the metal slide and poorer tolerances in manufacture.)
 
Despite owning lots of odd cheaper rifles (because there are no expensive versions of them), I believe in buy once, buy right.
 
The AA might be fine for an upgrade platform, but that's not what you are looking for.

This is a great one. 
 
 
Selling a bundle of guns for £400, the vast majority of which don't function. 

I have 5 TM pistols. I use green gas, not even close to a broken slide. It happens sometimes if people upgrade the gas bearing internals for more FPS, but again, you are not upgrading anything. 

Backup and you don't want to upgrade?
 
TM all the way, they are reliable and the "Loss" of a metal slide means it will work in all but the lowest temperatures the UK has to offer. 
 
The main issues with the AA stuff is the crap rubber seals they use in the pistol itself and especially the mags, a few people I know have replaced all the rubber stuff to prevent gassing out. Take the cost of those upgrades and you might as well of got a TM. (It will still perform poorer due to the metal slide and poorer tolerances in manufacture.)
 
Despite owning lots of odd cheaper rifles (because there are no expensive versions of them), I believe in buy once, buy right.
 
The AA might be fine for an upgrade platform, but that's not what you are looking for.

Something like this would be ideal Hawke Picatinny To Picatinny 0.5" / 13mm Riser - 5" / 127mm (22411) - Pull The Trigger
 

I will haunt your dreams. 
 

80 Metres is about typical for a fully upgraded sniper rifle. Unless you are a god tier builder. 

That FPS is far too low, especially considered the barrel length and the whacking great spring you have in there. Do you have an air leak? Cock the bolt , stick your thumb over the end of the inner barrel and fire, does the air stay in the cylinder or does it leak out? 
 
You should be hitting out 100 metres with that setup. (Though that's with an M170 which if working properly will be too hot for any UK field)
 
You should be getting about 80 metres with an M145/M150 which would be UK legal.

That FPS is far too low, especially considered the barrel length and the whacking great spring you have in there. Do you have an air leak? Cock the bolt , stick your thumb over the end of the inner barrel and fire, does the air stay in the cylinder or does it leak out? 
 
You should be hitting out 100 metres with that setup. (Though that's with an M170 which if working properly will be too hot for any UK field)
 
You should be getting about 80 metres with an M145/M150 which would be UK legal.

That FPS is far too low, especially considered the barrel length and the whacking great spring you have in there. Do you have an air leak? Cock the bolt , stick your thumb over the end of the inner barrel and fire, does the air stay in the cylinder or does it leak out? 
 
You should be hitting out 100 metres with that setup. (Though that's with an M170 which if working properly will be too hot for any UK field)
 
You should be getting about 80 metres with an M145/M150 which would be UK legal.

I understand that Jersey whilst owned by the UK is technically not part of the UK. I believe they have the same laws as us and that me posting a VSR Receiver and scope rail shouldn't be a problem.
 
But I do have to fill out a customs form. Will I be covered legally if I put Toy parts? Or should I put something like "Airsoft parts" or "Low powered air weapon parts" ?
 
Cheers!
 
 
 

You would probably have to look at some Bullpups as the motors aren't in the pistol grip. There is not much weight forward of the pistol grip either which will certainly help in your situation. 

This is a great one. 
 
 
Selling a bundle of guns for £400, the vast majority of which don't function. 

This is a great one. 
 
 
Selling a bundle of guns for £400, the vast majority of which don't function. 

None. The We 1911s use single stack mags which can do 35 RDS on extended mags. 
 
The TM extended one can do 40 RDs but you really need a TM 1911 to make use of it.
 
The WE 1911s are really terrible mind.

I agree with you on this. 
 
I have written much on the site but there were more then one group of people skinning up at lunchtime in the Carpark at Tactical Warfare in Croydon. The smell reached the safe zone yet they weren't remove from the game day.