mightyjebus

well this thread will be useless unless we include "Bush Tucker Man". (using nut shells for clothes pegs was priceless)

VFC Glock 19X in Tan and a E&C Glock 19X in black. Both are Gen 5. Internally the E&C is a TM clone. The E&C build quality reminds me of a TM with a Guarder slide fitted. It's head and shoulders above anything from WE, Raven, etc. The other big bonus is that they are about £95.

Old and new. My original P90 from about 2004 alongside the new P90+ from TM. Outside they are very similar however miles apart inside. The P90+ paired with the TM Lipo battery is impressive to say the least.

yeah, I think I got a good deal. it had a torn hop rubber (swapped for a Green G&G) and it would fire on safe but that's a known issue and took about 5 minutes to fix. It also has the Wii Tech hop up fitted so a nice little bonus as well.

went to Red Alert's boot saleamathingy today and picked up a bit of a bargain. It's a PTS Masada for £80.

years ago TM used to make technical manuals which went into a bit more detail on their AEG's. Anyone know if they still produce them for their newer stuff? I've attached the Technical Manual for the original P90 as an example.

Flintlock custom workshop Saiga 12 drum mag turned up. 350 BB's of madness coming up.

just has one of these turn and it's stupidly good for 20 quid. https://www.aliexpress.com/item/1005006119967193.html?spm=a2g0o.order_detail.order_detail_item.3.12f7f19crZ9A2w

you would be better off dropping this thread and just go develop the app and release it. If it's any good people will use it. Forums have been around as long as airsoft has been popular in the UK. This one is a bit crap, UKAZ was better but was crap compared to the one before it and I can't even remember its name. Zeroin exists and struggles with scammers so has a low reputation whereas Arnies was the best forum, it's still there but no one goes there anymore, which is a shame. The forums are full of cantankerous old gits who fear technology, think Randolph and Statler wearing DPM. Your post comes at a time of year that regular forum users fear, the school holidays, and to be honest the replies so far have been a bit tame. Good luck with the app, I hope it works out for you.

my SGR turned up today and it's in bits right now. seems to be a cut off lever issue. trying to figure it out now.

you'd be mad to buy one of these. I'll let you know how I get on

nice

PM'd

If you mean me then yeah they work. Did about 40 pairs and some people are buying 2 pairs at a time now. Just in the process of trying out some revision sawflys which will get tested this weekend.

nice idea. I went a different route and added fans to the side of the glasses. No bulky box or tubes as they run directly off a USB battery pack. A 2000mAh lasts about 2 days.

No idea what a Mini-S is.

buy these 4 things. https://airsoftdirect.uk.com/product/tokyo-marui-ms-li-po-battery-checker-for-tm-ms-li-po-chargers-batteries/ https://airsoftdirect.uk.com/product/tokyo-marui-ms-li-po-battery-7-4v-1500mah-airsoft-battery-model-standard-type/ https://airsoftdirect.uk.com/product/tokyo-marui-ms-li-po-battery-7-4v-1500mah-airsoft-battery-model-standard-type/ https://eagle6.co.uk/product/tokyo-marui-dedicated-ms-li-po-battery-charger

yup, it's never going back on so up for grabs. I'll PM you a picture of all the bits available and we can go from there.

Decided the TM AKM GBB needed real Soviet AKM wooden furniture adding. After a lot of swearing, it's now fitted.

Suns out, Gas AK guns out....

go to PCBway and go to the 3D printing section. you can choose Aluminum (AlSi10Mg). They check the file for errors and then send you a quote. takes about 1 week to produce and about 2 to 3 weeks to reach the UK. Prices are not too bad to be honest and expect the bigger parts to be more expensive. You can upload and get them to quote with actually buying so you can back out if it's too pricy. I've used them a few times and they have always been spot on.

stupid lack of TM spares making me reverse engineer the SCAR selector plate. Photo is PLA printed prototype on top. Final version will be done in Nylon resin.

this weeks project, a ACR stock adapter for a TM SCAR. Still needs a bit of tweaking but it's getting there.

Diode https://eu.mouser.com/ProductDetail/Torex-Semiconductor/XBS306S19R-G?qs=AsjdqWjXhJ9Ez92PXmPulw%3D%3D&countryCode=GB&currencyCode=GBP 5 pin transistor https://eu.mouser.com/ProductDetail/ROHM-Semiconductor/UMY1NTR?qs=4kLU8WoGk0skPoV6fDfWEQ%3D%3D&countryCode=GB&currencyCode=GBP don't order this transistor as it's slightly too big. I made it work but you would be better getting a smaller size with the same spec.

That was quick..cheers