mightyjebus

it's going to be hard to find a UTR stock. try contacting DE direct (http://www.deairsoft.com/utr45.html) and see if they will sell to you direct.

yeah the fake tube sits over the tracer as long as you remove the foam from inside it. it's 3 pieces of foam and I needed to remove 2 of them for the blaster tracer to fit.

it's designed for that very purpose. if you unscrew the fake silencer there is a -14mm thread under a pretective cover. all you need to do is remove some of the foam from the fake silencer and away you go. I tried it with an Acetech blaster and it works just fine.

SD finally turned up. It's noticably quieter than it's brother. and here it is compared to the older TM SD and a VFC GBB SD. (old tm top, new tm middle and VFC bottom).

the chance of it actually making it to the board when it leaves the glass is pretty slim.

it's flux that needs cleaning off with some IPA

so a fifty pence IC from china is all it took to get the titan up and running. happy days! anyone got a knackered cheap NGRS in need of love?

I knew I had to snap it up as soon as I seen it.

AKX is released at the end of the month. https://impulse101.jp/en/gbb-rifle-gas-gun/tokyo-marui-akx-real-gas-blowback-series-5746 not quite sure what Marui's thought process is at times. They could have knocked out a AKMSU or even a AK74SU but went with the AKX

Picked up a CA53 from @VonGrimm and he was very honest in his description. After a bit of work she's looking a bit better. Just need to sort out the gearbox issue once the part arrives and I might replace the CA Mosfet with a NanoAAB I've got here sitting doing nothing. Before: After: Based on a HK53A2 I fondled in Iraq belonging to the RMP CP teams. I also took a bit of time and gave the XM177 PTW a bit of a service.

VFC do one

long time project AEG. CYMA 0.28 Type 3 AK47. This is the recoil model similar to the TM NGRS AK's. externally it has some Inokatsu laminated furniture worn naturally and the magazine is a RS slab slided early AK mag modified for a midcap internals. Internally it is running a Leviathion V3 and ZCI 400mm inner barrel and Maple Leaf Mr Hop (50).

cheers, that picture is excellent. let's see if a 47 pence piece can recover a Titan.

Anyone got a Titan handy that can check out the number on a MOSFET? I've got a blown MOSFET on a titan and it's destroyed the number on the IC making it hard to read. I think it's a 7129 MOSFET and as you can see in the picture I can't make out the numbers in the middle. if anyone is wondering then yes reverse polarity of the battery can destroy a titan and no it's out of warranty.

pretty good deal at airsofttiger for the elusive original Pmags for the NGRS M4's etc. $10.90 per mag and they also do a hicap at the same price. remember that shipping will be around 40 quid for 6 mags. it works out about £17 per mag. https://airsoft.tiger111hk.com/p52171/Battleaxe-120rds-GEN.2-P-style-magazine-for-Next-Gen-M4/SCAR/HK416-NGRS-AEG-Black/product_info.html

you know what the MP5 needs? a grenade launcher. Initial 3D printed non firing replica. I'll be working on the internals to make it fire 40mm's now that I have the external shape. If anyone is interested it's based on the Istec ISL launcher for the MP5/HK543

https://www.bespokeairsoft.co.uk/ares-x-amoeba-ar308s-aeg-rifle-bronze-ar-097e

I've got one of Arnies G3's somewhere......

airsofters come and go but I'd just wish they would bring full auto back to CQB site.

So a New Zealand pilot has been kidnapped in Guinea which is a shame but more interestingly the 2 weapons being carried by the hostage takers are pretty special. The first is a Belguim FNC with tactical stick attached but the 2nd weapon has me stumped. Let's see if anyone else can figure it out. So far I can see: a G3 flash hider a AK gas block a backwards AK front sight? a HK416 front rail a M16 Upper and Lower receiver a M16 30 round mag don't ask me what the rear sight/carry handle is. and to finish it off a M203

PM me the details and I'll have a look

did a test print of the Manta and it fits the Angrygun can no problem. Black is the Manta and coloured is a painted fanta I did ages ago.

manta complete meshed.stl Here's the STL file. let me know if you have problems printing.

no worries, give me a day or 2 to find it and modify it again. it's on one of these external HDD's somewhere!

Nice. If you want to print another with the correct name, let me know and I'll send the file across (yeah I made the Fanta one)