mightyjebus

yeah thats plenty. you should have seen a difference if that was causing the issue. best bet would to go and buy one of these to try and fix the issue https://www.fire-support.co.uk/product/angry-gun-cnc-steel-magazine-release-for-marui-m4-mws-gbb-standard-version

if it's under warranty take it back to the shop. If not remove the red area by a very small amount using a file. test fit and if still tight take a bit more off. bestr to do it slowly and not rush it or the mag won't sit correctly.

Cybergun are releasing another 3 SCAR SC's in Grey, Tan and Black but the OEM will be BOLT instead of ARES.

picked up 2nd hand in A1 condition Cybergun (ARES) SCAR SC

There's a Japanese video floating around youtube showing the new IC

https://www.airsoftworld.net/lonex-next-generation-enhanced-hop-up-for-recoil-shock-aegs.html

This was a project and a half. Tokyo Marui MK46 MOD 0. It had the wrong flash hider, broken front sight, missing comfort grips on the front handguard, missing foot from the bipod, broken recoil mech and didn't feed properly oh and it was spray painted in desert colours. After much scrubbing, 3D designing the recoil mech and comfort grips and general tinkering it's finished (apart from I'm looking for the correct front sight and maybe some original comfort grips)

https://www.weapon762.com/silencers/3365-rgw-omega-9k-full-set-dummy-silencer.html?search_query=omega&results=4 or https://shop.jkarmy.com/rgw-omega-9k-dummy-silencer-tracer-full-set-mp5-style.html

here's the stl file. it's been repaired in 3D builder so should be good to go straight into your slicer. it's a snug fit but for extra security there's a hole in the bottom for a 3mm grub screw. vz61 rail v3 repaired.stl

looks good. I think the only difference between the new and old MP5 is an upgraded chip on the ECU.

bought a KWA GBB Scorpion VZ61 for shits and giggles at UCAP vendetta on Sunday and after waving it about in the dark like a moron I decided it needed a torch and tracer adding. I found a file on thingiverse and modified it so that the folding stock could still fold and here it is.

lucky you. my impulse MP5SD6 has been stuck in customs since the 3rd Jan!

I've got 1. it looks like something dreamed up by an airsoft company but it's actually a copy of the LWRC SMG 45. internally it uses the same Falcon gearbox as the M9XX series so is pretty rock solid. biggest problem is trying to carry the extra mags as they are about the same length as a P90 mag.

https://airsoft.tiger111hk.com/p37728/Golden-Eagle-M870-Gas-Shotgun-Shell-Cover-(Tan)/product_info.html

here's some pictures of the Omega 9 tracer.

it's a Tokyo Marui Sig 550 which has a electric burst mode. It's pretty rare but not too valuable. The burst module had a tendancy to break so if your one still works, that's a bonus. You have the box and all the bits but it's probably going to be worth around 200 quid and slightly less if the burst module is broken.

check out Unlce Jessie's reviews on youtube for these 2 printers: https://www.elegoo.com/products/elegoo-neptune-3-pro-fdm-3d-printer-225x225x280mm or https://www.elegoo.com/products/elegoo-neptune-3-plus-fdm-3d-printer-with-larger-build-volume-of-320x320x400mm

if anyone is looking for a tracer unit that fits the tri-lug on the TM MP5 NGRS then I can confirm the Omega 9K version fits. bonus is it comes with a couple of different ends so you can fit it to your other AEG's if they are -14mm https://shop.jkarmy.com/rgw-omega-9k-dummy-silencer-tracer-full-set-mp5-style.html

I've used quite a few over the years, ANET, Creality, Anycubic and right now I have 2 FDM printers. I'm running a Creality Ender 3 MAX for large sized prints but there is a shift in FDM printers for faster print times and I invested in a kickstarter for the AnkeMaker M5 which prints about 5 times faster than traditional 3D printers. I'm hearing good things about the Bamboo Labs X1 carbon however it's pricy and it's stripped down little brother the P1P is worth a look. These 2 will give you the fast print speeds. To put it in perspective the Recoil part i designed and printed would have taken 5 hours to print on a tradition 3D printer but the Ankemaker did it in 56 minutes with the same level of detail you'd expect from a tranditional 3D printer. If you want to go down the resin route then Elegoo or Anycubic printers are good value for money with very high detail. I had an original Anycubic Photon, then got a Anycubic Mono x and a Elegoo Saturn and now have 2 Anycubic M3 Max's as I found that I wanted the bigger build plates every time a new larger one was released. A decent mid range cheapish do all you need resin printer would be the Anycubic Mono X 6K or the Elegoo Saturn 2 8K. Very high level or detail, decent sized build plate and the price isn't crazy.

working on a TM MK46 recoil in need of some love. Knocked up a 5.56 link retainer for the magazine to keep the rounds attached to the mag (and cheaper than the £66 fake bullet set from TM). The recoil part that shakes the rounds had been damaged so I designed and printed a new one and one of the bipod feet was missing (let's not talk about TM's decision to use a magic pin system to hold the foot on instead of welding it). I've got a replacement bipod on the way so the foot design and print was just for fun and it does work.

Latest addition - SIg Air (VFC) MPX AEG

PMR radios work in the 446Mhz range. Lambda length for 446Mhz is around 62cm however an antenna can be 1/4 lambda so around 15/16cm would work in theory. That's for the TX side for the receive side the longer the better is my experience (I once managed to talk to a ship anchored in Cyprus from Brize using the worlds longest slopping V HF antenna which was a bit of a surprise.). The TX/RX will probably be shit to be honest as you are working with 0.5W output power so the range is always going to be a bit pants. factor in the site you play at having trees, buildings, etc then the range will drop significantly. Thinking into it a bit more the best chance would be to thread 16cm lengths up and down and across the full molle on a chestrig would in theory give you multiple 16cm antennas which might work better.

real wooden furniture for those interested. https://airsoft.tiger111hk.com/p51731/Airsoft-Shien-Marui-AKM-GBB-Laminated-Birch-Stock-Set/product_info.html

bit of a work in progress. Fitting LED's and laser to the TM Curve pistol. LED's work but the laser is giving me grief. Need to redesign the push button as the grey one on there now was just to get things working.