mightyjebus

Sadly it's going to be a 1 of 1 simply because finding all the parts is becoming a pain and extra expensive as everything needs to be shipped from Asia.

yeah, the fake bolt release and the dimpled barrel are 3D printed. I need to finish modelling the fire selectors which will be 3D printed until my CNC machine turns up and then I'm planning on making them out of Aluminum.

Picked up a VFC MCX for a good price today. As it's VFC it will need a bit of work but happy that I now have one of these.

a CYMA SR-15

Not 100% finished yet as I'm waiting for a couple of parts but thought I'd share the progress so far of my KS-1. how it started.

Australian Glock.

Ah yes the Browning. Me firing the Browning. me loosing $10 cause it sucks.

Strangely Glock still make them, even with the old Xenon bulb in it.

picked up a Glock light for my Gen 5. for anyone interested www.g-ten.co.uk have them on sale for £50 and that includes 2 CR123 batteries (well mine did). I believe these are X-police issue.

I've never been a big fan of CYMA. Always found them a bit meh. I picked this up recently and it's actually a bit good. It's a CYMA Noveske Infidel for those that are interested. Comes with a eshooter mosfet as standard. I even like the midcap as it holds 190. Only thing done to it was swap out the stock for a Magpul slim profile one and replace the hop rubber with the 4Uantum friction Pro as I'm finding them very good.

I think A&K have also done at least one version. It's an interesting RS gun. Gas piston operated instead of direct gas impingement, sort of a HK416 before HK416 was a thing.

We are very old?

That G&G one looks good. The original original was made by Prime a long time ago. I'll see if I can find some pictures of mine. *edit* found the pictures of my 2 Primes.

What make is the ZM LR-300?

PM me your email address and I'll send the file

The latch or the bolt release or both?

currently working on a KS-1 using a CYMA as the base. Designed and printed off the cocking handle latches to match the KS-1 and made the handle ambi. prototyped the fake bolt release in FDM and the resin version is printing now.

found a Donor (CYMA) for my KS-1 build. Now the hard part begins, so much to do. if anyone is interested the plan is: remove the QD points from the rear of the lower receiver. chop out the right side bolt release and replace with a 3D modelled correct version. either find or make the correct fire selectors engrave both side of the lower modify the charging handle to be ambi print a outer barrel sleeve to replicate the dimples on the real thing Cerakote everything fit aftermarket parts (rail, grip etc) - still need to find knock off Mbus Pro sights and the stock pipe QD point I've got a ACRO P2 but need to find the reptilla scope mount and find a suitable short dot that's close to the Vertex 1-10 (not spending £2000 on a scope!) This may take a while.

Gen 4 will be released the 12th December. full trades as per the original. Gen 5 will probably happen once this batch is completed and they switch tooling. https://impulse101.jp/en/gbb/tokyo-marui-glock-17-gen4-gbb-4988

Red wire goes to 1 pole on the trigger along with the red wire from the motor. signal wire goes on the other pole of the trigger. motor Black wire goes to the mosfet and then to the battery

The ACR is going to be a tough one to model by the looks of it.

That's awesome. reminds me of something I'm messing around with currently

I've been through this before. You will need to contact the officer mentioned in the letter and provide your UKARA details, the Public Liability Certificate of the UKARA site and they will also want to see how much you paid for the item which is sometimes different from the invoice attached to the front of the parcel.

The clip is part of the pin highlighted in re above. Might be easier finding an LCT than a Canik part. Failing that, buy a split pin and modify it to fit.