Jump to content

Hef Legend

Members
  • Posts

    910
  • Joined

  • Last visited

  • Days Won

    6
  • Feedback

    100%

Everything posted by Hef Legend

  1. Here we have my GHK M4 (L119A1 build), less than a year old. Potentially looking to part with this and move on to another project, so after a rough price. Gun has had less than 1k through it. Completely stock internally, had a worn paint job done to it Gun will come with 5 xGHK G5 mags 1x GHK M4 mag L11a1 barrel extension Surefire flash hider Correct stock and stock pad Storm pistol grip Any ideas on pricing would be appreciated.
  2. Anyone know any techs near brighton/crawley//lewes? Tried wright arms but no replies to my messages as of yet. Need some work done

    1. Show previous comments  3 more
    2. Avionyx

      Avionyx

      I'll ask Today for you, should get a reply by Lunchtime ish.

    3. Hef Legend

      Hef Legend

      Nice one cheers fella

    4. Avionyx

      Avionyx

      Hi Hef,

       

      Sorry to mess you about chap - seems the guy I was thinking of has now moved out of the area!

      Sorry about that, was worth a try.

  3. The rifling does not undo the hop, if anything it helps it work better by allowing air around the BB and reduces the ricochets of the inner barrel. I've run these in loads of guns and still do in a few, in fact my short barrelled tippman has the TK barrel in it and it has great accuracy and range, considering I run the gun at 330 and the inner barrel is about 200mm long, it range isn't far off my old CTW which was hop modded. If you play at <330 fps this barrel is great with a g&g bucking, even better if you use the g&g flat hopped. They are stupidly hard to get nowadays but they do perform very well
  4. Warrior L96 rifles can be had for about £80 new from TG
  5. One thing recently that's annoying me more and more is UK sellers happily selling hot rifles, then charge £35+ to bring it down to UK law :S

    1. Show previous comments  2 more
    2. Esoterick

      Esoterick

      Yep I always tell people not to buy if they won't downgrade for free.

    3. ImTriggerHappy

      ImTriggerHappy

      Would be worth checking out the legality of selling a hot gun because the sale of goods act states that any product sold must be fit for purpose.

      If a gun is over uk limits its not and its the sellers responsibility not the buyers to make it so.

       

    4. Colonel Kurtz

      Colonel Kurtz

      ^ agree but sounds easy to worm way out of. Could argue the purpose of the gun is only its appearance and listed functionality and there's many types of defence for owning it only one being airsofting skirmishing. 350fps is a common standard for skirmishing but not law, perhaps a limit is defined in site insurance, be interesting to know what's in such policies as it'll be much more specific than the terribly vague UK law

  6. What's this a cut down asg urban rifle? I like it lol
  7. WE hi Capa worth picking up or stick to TM? My thinking is the WE has a metal slide, whereas the TM I'd have to get one separately

    1. Show previous comments  3 more
    2. Josh95

      Josh95

      i kind of regret buying me we, i would have gone tm if i had the choice now. plastic slide also add to gas efficiency a lot.

    3. AK47frizzle

      AK47frizzle

      You don't need a metal slide. I'd go with performence over flashy, bling slides.

    4. Qlimax

      Qlimax

      the 5.1 is to bulky and heavy and they are a nightmare to get a holster for. my first sidearm was a 5.1 capa and whilst it look good it were shite. the mags are bottom heavy. stick with a TM

       

  8. Are the CYMA CMo40x series any good? Are they the metal bodied ones?

    1. Show previous comments  10 more
    2. Lozart

      Lozart

      Yep. M14 EBR.

    3. Hef Legend

      Hef Legend

      Any good? I was half tempted to get TG to install some upgrade parts as they don't charge labour.

    4. Lozart

      Lozart

      Very good. WIth zero hop it chronos around 350FPS. Takes Marui parts as it's a clone of theirs. Quite front heavy due to the RIS and reasonably hefty overall (around 4.6kg) but accurate out of the box with decent enough range. Good DMR platform if that's where you're going.

  9. Anyone think it's possible to out a hop on the ASG tac6? Guessing some form on TDC hop would work. Also wondered if you could somehow get it on HPA and run the line through the stock instead of the 12g caps.

    1. Hef Legend
    2. Hef Legend

      Hef Legend

      So the HPA can be done, just seen a booligan video on it.

  10. What propane do people use and where do you get it? Green gas is getting pricy when taking my GBBRs out

    1. Show previous comments  6 more
    2. Qlimax

      Qlimax

      Colmans as well. I've just started using Nuprol Red for my GBBR and i must say so far i'm very impressed with it.

    3. Airsoft_Mr B

      Airsoft_Mr B

      Damn Kiwi how often do you skirmish?!

    4. GiantKiwi

      GiantKiwi

      Used to be every 2 weeks, but I did have the break from August last year until February because of my leg.

  11. I got 2 of these, everything Spoon said is correct. Set up can take some time, the hop is hit and miss. However, going with the flat hot nub and decent flat mod to the bucking, these can easily push PTW range. RPS is around 10-18, However, there are some good mods on the FB group about getting higher FPS
  12. I did see that, just wonder which kind of scope ring I'd need, as I intend on putting a suppressor on.
  13. Just wondering ig anyone can think of a good way to mount a scope on a KSC/KWA VZ61. I'm really tempted to get hold of one but have heard the iron sights aren't brilliant. The only ways I can think of doing it are finding a mount that would fit over the barrel or the barrel neck, or a more permanent solution of welding a RIS rail on the top receiver. Any ideas from you guys would be greatly appreciated. Thanks Dan
    1. Show previous comments  6 more
    2. Colonel Kurtz

      Colonel Kurtz

      and think the cx4 & mx4 are couple those good looking guns that are annoyingly only availible as sh*t orange plastic from BBgun sites

    3. TacMaster

      TacMaster

      1.8 J is about 440 FPS on a 0.20..... Ouch

  14. Hopefully getting a scar soon then it's a toss up between a GHK AK if I've got the funds or maybe the KSC VZ61 xD

  15. Things to look at: Hop Bucking, damaged/deformed Ammo being used Using a longer barrel could be the issue, something to do with the volume of air matching the barrel length.
  16. The tippman is loud due to the action, if anything it is the one gun that sounds epic with soundhogs though lol I've owned an ERG, owned a WE Open Bolt, currently own the GHK M4 and 2 Tippmanns. Each is good in it's own way, depends on what you want. For realsim and performance, the GHK is awesome. The tippmanns are just plain fun and perform well once set up. The ERG is nice, with the bolt lock and cut off, but it just doesn't feel as good to me as the GBBR's and Tippmanns.
  17. just looks like an m249 SAW. Hunting around online, these seem to be made by a few people, G&P and A&K. They can apparently take most V2 gearbox parts for internals and A&K/G&P externals.
  18. A suppressor will reduce/muffle/change the muzzle report on AEG's/GBBR's and HPA guns. On a GBBR (in my case a GHK M4) the suppressor changes the muzzle report and reduces sound but only from a distance, most of the sound is the action of the gun. On an AEG (G&G for me) it just changes the sharp crack into a slightly duller tone. Again most of the sound is the internal action. On my HPA rifle (Tanaka converted to C02/HPA), from about 15" away it almost entirely eliminates the sound, similar effect on SMP's and Polarstar's. Utterly useless on my Tippmann though as it stupidly loud lol
  19. I think you basically push the back plate in to shoot. As a last ditch weapon or to quickly clear a room/corridor it could work.
  20. You can just order it from the website buddy. It's takes the goblin shells I think. If you do get one I'd contact the seller to double check
×
×
  • Create New...