Leaderboard

I dunno... bit of a vanilla, run-of-the-mill, pedestrian looking setup there tbh, you'll find most other people at your next game running the exact same kinda gun I'm afraid.

Nothing special, but this is my eldest son's old SRC MP5 that he gave me when he gave up airsoft several years ago. It had a "Navy" style lower and selector, which I really disliked. This morning, I decided to install a Perun Hybrid; having done that, I started wondering if I could fettle one of my spare Classic Army lowers to fit. I could; after some minor surgery, everything aligns well and it functions perfectly. A well spent morning.

As you may guess, I like my AKs.... Top to bottom... Arcturus AK12 Arcturus AK74 Custom TM Recoil AK74 WellPro PPK20 E&L AK AKMS Specna Arms AK with.... A few external mods..

Well i think most of us have at least two of them to loan out.

The machinist that was OEM for Inokatsu M4 line decided for whatever reason to end ties with them in 2014 and started selling direct under the Vipertech Brand. Think that sadly sunk them. Not sure who made the pistols though.

Thanks all got it sorted in the end, good ole trusty wd40 😎

Years ago a shop called Airsoft Dynamics did the same thing in this country. Had someone living in Akihabara Japan that would drop ship most of the stuff to them. If Boom Arms is anywhere near Kwong Wah Street in Hong Kong he will have about 30 places to source stock from most of whom do not have an English presence on the internet.

DAS GBLS GDR15 x7 Pts EPM's x3 stanag Mags x2 3d printed speed loader attachments x2 3d printed Odin speed loader Attachments x3 tubs of grease x2 hop adjustment tools x1 nozzle tightening tool x1 inner barrel mount Type B buffer etc. 13.5" upper Steel BCG AngryGun MK16 handguard SF flashider SF style flashlight and lightswitch Radiant style charging handle Mlok foregrip Vortex replica scope and geissele scope mount Type b hop arm ZCI 363mm 6.02 tight bore Maple leaf 80 degree bucking 10.5" upper Aluminium BCG Replica Geissele charging handle Replica unity riser Real steel Vortex Crossfire Red Dot Replica Geissele MK4 Handguard SF style supressor and flash hider Replica SF flashlight & Peq15 (IR laser/light, visible laser/light) Maple Leaf Macaron 60 bucking ZCI 300mm 6.02 tbb Mlok foregrip Lower receiver CageAirsoft C-TECH Aegis Enhanced Electronics V2 Recently serviced PTS EPS Stock PTS EPG Pistol grip Ambi bolt catch lever Replica Geissele trigger guard Laser etched lower receiver with Geissele trademarks

I'd say that there's something wrong with the feed lips, the BB can't into them, rather than a spring problem.

At least you found it. I made the stupid trigger spring fly on my first strip down….. 6 weeks later I received one from a HK site 🤣 all for £4.99

Are they still going? I haven't seen any of their guns for years. Although I did always like their adverts😉 If you're looking to buy new then you'll probably have to import it from a HK based shop

One thing to bear in mind is that the paintball style masks make it nigh on impossible to use your sights without some sort of riser

Post an ad here https://airsoft-forums.uk/classifieds/category/17-guns-wanted/

😂😂 that’s what I hate about dismantling ! All the small parts that fly off everywhere. I seen that vid looks super helpful will have to order the part & fit it. let us know how you got on with it 😁

Not if it's taken 1 hit but I do replace them every couple of years or so as polycarbonate can degrade over time Fair enough, my point was about buying second hand

Mine was brand new and sealed and came via an airsoft shop that sells on eBay

Just got an SRU-Precision bullpup chassis from Taiwan and fitted it to a Bravo Company VFC GBBR. Powering it with HPA through a TAPPairsoft M4-AR adapter. Added a Maple Leaf Hummingbird short-stroke bolt to replace the stock-tube recoil spring, which is great because the original recoil was distractingly strong. It seems to need higher pressure than expected but I've heard these V3 guns have steel internals so they can take whatever pressure you put through them. Can’t wait to skirmish with it in a fortnight.

Wow, i haven't seen a ROFLcopter for years.

Hello. I'm 52, dress up as a space soldier, and play hide-and-seek with toy guns. What @Tackle said, just initiate a Section 75 or a debit card chargeback. Don't get into deep details. I wouldn't even mention the return, just "I bought goods, I have neither the goods nor the money, seller is not contactable." Let them tell their side. You might be surprised how quickly you get contacted by Bespoke to resolve it, but I'd stress, do not drop the case until you have working goods, or a full refund, no matter what you're promised.

Well, I think I'm safe in saying this, but I'd say the issue was 100% their fault as Bespoke Airsoft and iWholesales are both in the same building and run by the same people. Here's some evidence for you... https://find-and-update.company-information.service.gov.uk/company/07676829 https://find-and-update.company-information.service.gov.uk/company/11367833 ... and you can use Google Street View to see the building they're both in with all of their signage. There will be very specific reasons why James / Jaeger Precision split with them, I think there was bad blood / something in the relationship went wrong. Personally I'd go nowhere near Bespoke Airsoft since he left them.

Your doing fine, thanks for sharing your experience with us. Don't waste any more time trying to speak to bespoke, I'm assuming you paid via debit or credit card, get on to the banks fraud department, explain the situation, including the non existent parcel force numbers & ask for a charge back. Same if you used PayPal, initiate a dispute & let it run until you've been refunded. Good luck👍 PS don't mention faulty GUN, call it faulty or damaged goods etc, don't want to spook whoever on the other end of the phone.

Before doing anything that could cause permanent damage try putting a rubber band over the end of the allen key for extra grip like this

I’ve got a new mp7 & noticed similar issue with mine. I took out the nozzle & lubed up. When I reload & release the bolt it doesn’t go all the way forward therefore giving it a dead trigger. If you release the mag manually cock it then it works fine. One person did mention the gas freezing up some parts but don’t know if this is true. doesn’t happen all the time but obviously shouldn’t be happening at all

The folding stock fetish continues..

Recently got a noveske N4 and absolutely loved it but ran into a few things with the main bits being air seal. So it’s airsoft so I started tinkering to fix some issues to see how we nice we could get this shooting. Initial review out the box it shoots great but on green gas ( vorsk v6) I was only getting 0.8j, the lock back was very intermittent and struggled to hop 0.36g or higher BBs wit the stock bucking rubber. Upgrade 1 - Nozzle and upgrade springs i planned on installing a NPAS so i could have some finer adjustment of the FPS and everywhere flagged the DE nozzle just doesn’t work well. This is where the first upgrade comes into play Guns modified 3.5 nozzle, this was a smooth change over while is was going this I upgrade the nozzle return spring this was entirely needed as the stock DE is strong then the standard TM but has also been flagged as a point of breakage so dropped in a Waldo custom MWS 140% spring. After the upgrade we are now sitting at 0.9j with very little deviation while also helping bb feeding. Upgrade 2 - Bucking & Barrel I think I got one of the earlier guns where the installed barrel was pistol length of around 130mm this is a fast way of keeping the FPS low. So was always going to be upgrade to a full length. Prometheus 250mm barrel was installed with a 4antum bucking. I wasn’t trying to break the bank so went with something that was tried and tested. I use 4antum in some HPA builds and lifts 0.32g and higher easy with great consistency and the Prometheus has also been great bang for buck inner barrels a step up from ZCI but not as high a edgi. After the upgrade we got a huge boost to 1.1j which was great boost but also helped the grouping hugely. Upgrade 3 - Mag fixes On playing a few games the stock mags are not great I struggled on some mags to getting through a full 35 rounds. The best upgrade would be to get TM mags which seal better and have better efficiency out the box. BUT if you have already purchased the DE mags like I had you do have ways to help improve. One the gas routers aren’t great so the best swap is guns modify cold weather router which allow a great deal and work well in cold weather. The mags are also known for leaking and this is where gasket seal is your best friends. I used gasket seal in the top and bottom of the mag seals leaving 24hr to fully dry. While I had the mags apart I also trimmed down the tube inside the magazine to a 1/3 of its sizes which allows more gas into the magazine. after 24 hours and checking the seal I am able to get 2 1/2 reloads before needing to top up gas which is a huge improvement. After upgrade I found the seal and efficiency to be better this also helped push my joules upto 1.2j. Upgrade 4 - ZET plate and Feda Valve After getting the seal, mags and feeding consistent. It was team for the zet plate to help the lock back function and install the npas. I went with the Jaeger precision in stainless steel which is the same as the BavTac one which is in titanium so you can save some money there. It’s really easy to do once you remove the trigger box which is a lot easier than the TM MWS. The Feda valve is a straight replacement and doesn’t really offer a performance upgrade but allows you to adjust FPS to make sure your within site limits. Just to flag as I had already swapped the nozzle to a guns modify it meant this was a smooth insteal of the Feda valve but original DE nozzle are thicker and may need to be glued down to get the NPAS fitted. the zet plate has allowed more consistent lock up once the mag is out of BBs. The NPAS allow me to adjust FPS from 0.8j - 1.4j depending on gas on the fly without doing a full strip down. overall the upgrades have been really nice to help improve the performance which are a lot of the issues the TM MWS also has ( apart from the mags ). On full tilt on green gas it hits 1.2j, red gas pushes it to 1.4j. What makes this great is the entry point of the DE N4 it’s almost half the price. For now I’m really happy with the performance and may look into getting a HPA adapter so will drop a update on this once I tested a few out but absolutely loving the DE a few upgrades and it’s matching a upgraded TM for a fraction of the cost. Upgrade 5 - Airtac MWS/ DE HPA adaptor This took a little bit longer as my first airtac had a leak and really wasn’t sent up for the DE. So it’s not as smooth as a drop in that they claim but the dudes at Airtac were great. Sent my Airtac back and indicated I will be running it in a DE which meant the added a green spacer to help it engage the knocker easier ( this as well as spare lips are included) I still found even after this the fit was very lose which resulted in the FPS being a bit all over the place. Using some plumber tape I was able to shim ( which swap this out for Velcro ) this to sit better. This helped my consistency so much I’m getting constant 282-288 on 95psi which was great for a system which is running on air tank given me great performance all year round ad I struggle with the gas mags in anything below 10degrees. Using HPA you will need to regrease kit bolt and trigger unit more as you don’t have the silicone from the green gas to coat bits. Even with the extra weight of the tank, line being a bit more restrictive the increase in reliability of the feeding, constant FPS is great and you have the great tuning being able to push the adapter all the way to 150psi which gives you a really strong kick and have the npas I can balance it out and get the Js I need.