All Activity

Looks like king arms bud, worth a pretty penny now! Sadly not of use to me, as I need the military A1 for my impression. Really do appreciate it though, thank you so much!!

Not actually 100% sure of brand you may know from these?

Amazon sell the foam blasters for £130 28/4/24

Is it one of the marui clones? If so, thank you very much for the offer however the Cybergun one seems to be okay. If it’s ares, I may be interested!

I maybe would have waited to see what he said via PM and if it could be resolved before leaving feedback I may even have a Thompson going spare in my rack if it's of any interest, a friend gave it to me to fix about 7 years ago when he left for Australia 😂

This is the first time I’ve had a negative experience on here, and leaving my first negative feedback was tough 😂 I would hate for others to have the same issue I’ve had. I’m partially glad I got it as I have a decent(ish) understanding of AEG gearboxes now so I could fix issues but I can only imagine if it was somebody looking to get into the hobby properly, it could quite possibly put them off properly. What do you recommend for the best case of action? As I say, never been in this situation before. I left feedback yesterday as I was having a bit of a mental battle as I don’t like putting a bad light on people but felt it needed to be done the more I got into the state of the replica. 😅

Yes, definitely need to take some form of action even if its only a negative review.

Right well if he has negative feedback (which I've just read) isn't the first time he has dicked someone over, but then he does have a few positive too, given the benefit of the doubt he may not have known about the condition but does need to take some responsibility for it send him a message (I can see he is currently using personal messenger) Sorry but I'm getting fed up with people getting messed about with second hand sales and you're expected to just suck it up, it's not fair

I cleaned up the gearbox, reinstalled all the inside parts and made sure it all lined up etc, replaced the motor with a new one, replaced the hop with a standard rubber/nub and it fires fine now. It chrono’d at 315 (On average) however there’s no safety and it’s on full auto as neither switches can be salvaged to work. I would say it’s in better condition overall, however without a safety and selector it’s essentially useless. My local shop had a Cybergun Thompson (Cyma spec I believe) which I purchased for a good price of £125 and most of the wooden parts from the ares fits it (Minus the stock) so I do at least still have a Thompson. I didn’t contact the seller further as I was rather upset and didn’t want to make matters worse or be rude towards him, however I just want to make people aware of the issues I’ve had. It seems I’m the second person, as his other negative feedback is from a guy who bought another WW2 replica that was leaking gas on most mags (Sold as gas tight) and also had screws missing.

Ahhh the old I tested it and it was working fine line really fucks me off too In all honesty you should have requested a refund the moment you found all the issues without starting to work on it but the work you have done was also necessary if the gun as to be in good working order but then he should also have noted the things wrong with it That's alot of things to be found and sounds like an absolute shit hog of a gun that's been messed about with by either him or a really shit tech The fact that the hop rubber was torn AND it has a missing nub makes me thing it won't be pushing out 335fps Is the gun now in a better condition because of your work? As in have you fixed alot of the issues it had Have you contacted the seller to ask for a resolution?

It was titled as “Ares Thompson M1A1 EBB”, however the EBB had been disabled (Not an issue as I would have disabled it anyway but it wasn’t listed as disabled) He mentions it’s been used for reenacting and airsoft, and is battle worn. Cool, not an issue and was actually one of the selling points for me. He mentions it shoots at 335 fps, has a Zci inner barrel (it does), a maple leaf 60 degree rubber (It did, but the rubber was torn up - Discovered this the day after purchasing when I went to chrono it and 3 mags wouldn’t feed (edit: I only tried 3 mags) I messaged him mentioning this, he said he tested it on the Monday and it was all working fine.), and an omega nub (It did not, it actually had no nub at all.) The advert also said it came with only a few high cap magazines however the majority of them were high caps. The only fault he mentioned was the selectors was loose (Via private message.), no mention of half the screws missing, no mention of the wood furniture handguard being super glued in place because he dethreaded the part that holds it on, no mention of the major screws that hold important parts on (I.E the handguard, the pistol grip) being stripped of thread, no mention of the motor installed failing and almost burnt out, no mention of the selector axis being super glued in place (You have to unscrew these to access the gearbox) It was to my understanding that the replica was in working order, minus the wobbly selectors - when I initially received it I put a battery on and pulled the trigger. It went bang like intended so I thought “Cool, it works” but I don’t have the means to fire bb’s where I live so couldn’t test it until the next day - which is where it all went wrong.

Sorry but with all those issues and the time you've spent messing with it you should send it back for a refund or the seller should at least offer a partial refund, they can't have been in the dark about its condition I'm fed up with people getting dicked over with sales. Even if the seller claims to not know anything is wrong with the gun and let's be honest the majority of the time they do and it's them that have fucked about with it and claimed they didn't know (not saying it's the case with this particular sale but it happens alot) How was the gun advertised? With just a minor thing that needs fixing?

Got to go for the rhino.

@K-Pop_Fan_4Life hat looks good, it's always nice to see something different to the usual MTP/multicam

No, Goods and services! I stuck with it as initially it seemed like just a hop up issue, which is an easy fix. It wasn’t until I had the upper off to get the hop up out that I started seeing the metal shavings everywhere and traces of superglue etc. I have had to “modify” it to get it apart to fix the issues, so it’s no longer in the condition that I received it in, and can’t be returned to said condition.

Does the eve 9 not have the pts stock on it? I use a block battery opposed to separate cell batteries. With the pts stock they fit vertically into the back of the stock.

I saw that but decided to just post about the pistol as that looks like a bigger piss take

So I have been really struggling to find a minerva piggyback Placard in stock anywhere, I really liked that some of the UKSF lads had adopted it for holding flashbangs on the front of the mag pouches so because I couldn't find one anywhere I decided to make my own I used an elite spanker triple molle pouch with a pistol pouch front and a thread picker removed the pistol pouches and bought a meter of multicam elastic, I have a girl at work who is a brilliant haberdasher and has done some kit repairs for me in the past so I gave it to her to do for me but unfortunately her machine couldn't get through the thick material so I went to hobbycraft and bought a pack of needles and thick thread and some beer because this was going to take absolutely ages 😂 I'm more than pleased with the outcome it only took about 3 hours of using pliers to ram the needle through and I only stabbed myself about 15 times 😂

Gas in the shell! As its an Mk3 version