All Activity
- Past hour
-
Time Left: 6 days and 23 hours
- For sale
- Used
Nuprol PMC Essentials rifle case in Grey - 46" in length. Surplus to requirements. £20. Price includes postage and paypal fees.£20
Hartlepool - GB
-
Time Left: 6 days and 23 hours
- Wanted
- As new
As per title looking for a Dytac SAG chassis in magpul FDE or grey. Let me know what you’ve got.NO VALUE SPECIFIED
-
Killer Adam reacted to an advert:
BOOMARMS CUSTOM - X-FIVE AIRSOFT GBB - FULL STEEL VERSION
-
Time Left: 6 days and 23 hours
- For sale
- Used
Been my main kit bag for the last ~2 years. 60 Litre main compartment with two removeable and padded dividers. Two big zippered compartments on the outside and one on the top of the bag. Two mesh pockets on the inside of the lid. Great for moving from the car to the safezone as it has included backpack straps leaving your hands free for other stuff. Also has carry handles on each end and one on the top of the bag. - £25 Prices includes postage and paypal fees.£25
Hartlepool - GB
-
Time Left: 6 days and 23 hours
- For sale
- Used
Mil-tec heavy duty rifle bag with velcro straps to secure your rifle in place. No middle divider but easily big enough for two rifles. Three big front pockets and internal zippered storage on the inside. 103cm x 30cm approx - £25. Price includes postage and paypal fees.£25
Hartlepool - GB
-
Fair point on both counts. Had a set of Brush stroke pattern BDUs in the past, notice one or two players would be slightly "heavy" on their trigger pulls when I played in it. It's a lovely pattern all the same. Also far more easily available these days than in the past. On the FAL front, will be curious as to whether the company expands their range... At the moment it seems to be only the one model.
-
Time Left: 6 days and 23 hours
- For sale
- As new
- SIG Air M17 GBB base - Nova CNC Steel slide + Rear Sight assembly set Installed - Nova CNC Steel (16mm diameter) 5 Inch outer barrel Installed - CNC Steel Recoil Spring Guide Rod / 150% spring set Installed - CNC Steel Adjustable Front & Real sight Installed - CNC Steel Take down Lever / Mag.release Installed - CNC Steel Flat type Trigger Installed - Nova P320 Polymer lower frame x 1 - Nova CNC Aluminum P320 Magwell x 1 - SIG M17 P320 CO2 21rds Magazine x 2 - Full Marking version Never used in game very good condition just tested fire at home very powerful recoil£520
- GB
-
The 'What have you just bought' Thread
Cooperman26 replied to Cameron364's topic in Guns, Gear & Loadouts
I had delivered today the Bolt Airsoft Cobra. The looks on it are immense! reading through the leaflet, as I do any RiF I purchase, slapped in a small 7.4v lipo andddd SMOKE. Instant smoke from the connection wires and the battery. It’s a brand new battery. Absolutely gutted. On the phone to the retailer and back it goes. 😢 -
And to be fair, the ethics of emulating Rhodesian Security Forces is, at best, controversial. Which is a great shame, as brush stroke camo is utterly epic.
- Today
-
I admire the dedication of those who pain their FNs in bush war colours, to be blunt the re-sale value will be obliterated. Also another webstore that I have seen the KA FAL pop up, in this time European so they are getting out there. https://www.safarasoftair.com/en/king-arms-fal-ver-2-full-metal-electric-gun
-
DerDer reacted to a post in a topic:
The King Arms FAL returns!
-
Time Left: 6 days and 21 hours
- For sale
- As new
Base RIF: - Specna Arms SA-P19 PRIME (All internals are stock) After market/ externals: - HAO URGI Rail 10.5" (FDE) - BCM Gunfighter Grip Mod 3 (AEG) - BCM Gunfighter Mod 3 (M-lok) - BCM Gunfighter Trigger Guard (AEG) - 5KU 11.5" Outer Barrel - GK Surefire 4 prong flash hider - GK Tactical SOCOM556 RC Suppressor (FDE) - FMA NGAL Red Laser (FDE) - Pressure switch Picatinny - Sotac M600B Surefire Flashlight (FDE) - Holy warrior T2 - Knight's Armament Aimpoint Battery Cap - Replica Arisaka M600 mount (M-lok) - (Bronze Not FDE) - Unity Tactial FAST Micro Mount (FDE) - Replica Magpul Sling mount Accessories/ extras: - 5x Specna Arms S-Mag 125rnd Mid-Cap (BLK) - ASG M115 Spring - Specna Arms Speed Loader - Replica Magpul MVG Vertical Grip (M-lok, FDE) - Stock A2 Pistol Grip - Sotac End cap, Pic Rail Adaptor and Pressure switch The Case: - Nuprol Large Hard Case (TAN) - Ton of stickers will be shipped in the hard case no patches included All working any questions or queries please ask away Listed at 0.70% retail value comes as Listed shipping & PayPal Fees included£720
-
Time Left: 6 days and 21 hours
- For sale
- As new
Included: - Holy warrior RMR sight - Hex key and screws - Rear sight mount comes packed in the orginal box comes as Listed shipping & PayPal Fees included£45
-
You may have been sold additional insurance, but it is not valid as they do not provide additional insurance cover for RIFs. -
Time Left: 6 days and 21 hours
- For sale
- Used
Selling this as I've been full GBBR for the last couple of years and this is in need of a good home. Chronos around 250 - 260 fps on a .32 bb and really reaches out there. It's got an ASG CNC hop unit installed but it's mainly stock running on a 2022 version gearbox from memory. It's never skipped a beat but doesn't like overloaded magazines. If you fill them until you start feeling it get harder to load then it feeds perfectly. There's probably a fix but I've always liked the more limited capacity. The right side selector has been "deleted" and the once awful selector now smoothly transitions into the fire modes. Genuinely don't want to see this go but needs must. Comes with everything you could ever need. 2x 11.1v 1000maH lipo batteries that fit over the gearbox perfectly. 10x magazines plus 1 broken spare (missing feed jaws and springs) Real steel LPA low profile sights. Yeti Wurks magazine release fitted and spare original release Clone Acro P2 red dot Almost a full set of brand new body parts (upper and lower receivers + pistol grip) and a spare stock 2x Custom kydex mag holsters (one is sadly missing a belt loop) Spare bearing spring guide Clone MS2 sling Atek magwell and other assorted bits Looking for £550 posted but would prefer collection from the Paddock Wood area of Kent due to the sheer amount of stuff. Plus you can have the gun bag if you collect it!£550
- GB
-
Not really a question. But looking at the slide, it does look like a guarder aluminium slide. -
Time Left: 6 days and 20 hours
- For sale
- As new
Well sas pro 2 ultra light hi capa. Pistol in perfect condition, used on a day for a concealed loadout, works perfectly. 4 gas mags in total, all gas tight. It comes with a clone shield rms, which turns off when the shroud is on top. Has a kydex concealed holster. A kydex own holster, clone qls, clone gbrs mount, and clone tlr 7a torch, again works perfectly. £200 all in posted, no trades£200
-
You might want to amend the description. They have been re-released and are available on many UK sites. -
Time Left: 6 days and 20 hours
- For sale
- As new
Nearly brand new upgrade done by wolfarmouries RRP 950+ Upgraded as below: *PROMETHEUS 280mm tightbore * PROMETHEUS rubber * Laylax F-Factory Frame Trigger Lock Pin *Gate TITAN V2 NGRS Expert *PROMETHEUS PISTON HEAD *FPS M4/416 Piston for MARUI NGRS full metal rack *EAGLESIX M90 SPRING *ZCI TM Next Gen Recoil (NGRS) Standard Gear set Plus you also getting 4 mid cap + 1 high cap Just £825 Pick up from RM10 or Skirmish Airsoft Billericay Skirmish Wood, Outwood Farm Road Billericay, CM11 2TX or +£25 Post by Parcelforce 48 with insur Feel free to ask any questions Thanks£825
London - GB
-
MrTea reacted to a post in a topic:
What have you just 3d printed (for airsoft)
-
Time Left: 6 days and 20 hours
- For sale
- Used
Russian Wartech TV110 plate carrier bought a few years ago. Postage not included. No swaps!£120
- GB
-
Time Left: 6 days and 19 hours
- For sale
- As new
Vortex trademarked LVPO scope with Geiselle mount, never fielded. Like new in the box. Killflash, flip cover, throw lever included. Beautiful scope, nice clear glass. Would look perfect on a DMR. I built a DMR on an AK platform, ordered this late one night 🍺 and it just looked daft on my painted AK. I’ll post it next day delivery included in my price or I’ll knock £10 off if you can pick it up. I’m in Paisley PA2 area.£120
Paisley, Renfrewshire - GB
-
Time Left: 6 days and 19 hours
- For sale
- Used
Selling my TM G19 it's in very good condition works perfectly. Fitted with a Aluminium slide i think it is a Guarder one. Unknown brand of fibre optic sights and come with the original plastic slide and sights.£160
-
Time Left: 6 days and 19 hours
- Wanted
- Used or as new
As per the title and picture of this listing Looking to buyNO VALUE SPECIFIED
Leeds
-
UKARA central registration is valid for one year, but is based on your local sites membership scheme Ask your site about renewal
-
lokkers reacted to a post in a topic:
Gun picture thread
-
Tackle reacted to a post in a topic:
What have you just 3d printed (for airsoft)
-
Tackle reacted to a post in a topic:
What have you just 3d printed (for airsoft)
-
Cannonfodder reacted to a post in a topic:
The King Arms FAL returns!
-
Time Left: 6 days and 17 hours
- For sale
- Used
Double Eagle EMG Noveske N4 GBB in very good condition, only used for plinking at home. This is a clone of the Marui MWS system, so most aftermarket internal parts for this system will be compatible. Comes with a genuine rubber Hogue grip and Magpul SL-K stock, replica Magpul handstop, adjustable NPAS (installed), and one leak free mag. £310 includes postage and PayPal fees in the UK.£310
-
custom gbb workshop GLOCK 17M FBI we gbb airsoft
-
Colin Allen reacted to a post in a topic:
The King Arms FAL returns!
-
Lozart reacted to a post in a topic:
Gun picture thread
-
LMKipper reacted to a post in a topic:
The King Arms FAL returns!
-
skkcagfan joined the community -
After a 10 year break, I'm back. LCT AK RS Type 97b
