Lozart

No, might do the next Lite one though. My knees can't handle a whole day up and down that bloody hill. Should be there soon though.

It really isn't, in our application especially. Good bushings are always going to be better than cheap bearings anyway. What he said. Take it apart and check to see if all the bearings you have are actually the same thickness.

...and you!

Ta! Every day is a school day!

I'm not sure I get this - a heavier BB leaves the barrel at a lower velocity, the energy on impact would be higher because they carry more momentum but I don't see how an object travelling more slowly will get there quicker.

FTFY

As with all things airsoft they should work absolutely fine together. Get yourself some barrel shims while you're at it to make sure it all lines up OK.

Are you trying to make a MK18 by any chance? 275mm is the total length of the product, 10.3" is the nominal length of the outer barrel part. You don't want a 7.62 rail for an M4. Get the DD 9.5" (especially if you're going for the MK18 look). As for the QD KAC silencer, you will need a bit of space between the end of the rail and the rear end of the flash hider as the suppressor fits over that.

To expand on what @Colin Allen put so succinctly, not really. There are places to play that cost less than £60 a pop to rent (Red Alert for example is £50) but to get your UKARA it costs what it costs I'm afraid. Plus, let's be honest if you've been playing plenty you're not going to want a) a gun as cheap as three rental sessions or b) just one RIF.

I have the G&G SR25 E2 APC, I only ever had that beeping when I tried to run it on a 7.4v LiPo. Swapped to an 11.1v and it stopped (I've since swapped out the ETU for the Perun ETU++ and that lets me use 7.4v no problem. Fingers crossed on the new battery!

It tickles me greatly to see "outperform. Dominate. AEG Perfection" on a box that also says "Nuprol".

I have both Vector Optics and Victoptics scopes and honestly, I'm hard pressed to see the difference. Granted my eyesight is only 202/20 when it's corrected and I'm just using it for airsoft but still. If you want to go cheaper and simpler Victoptics do a 1-4 LPVO now as well https://www.aliexpress.com/item/1005002037442492.html?pdp_npi=4%40dis!GBP!￡67.32!￡49.14!!!81.29!59.34!%40211b801517132614736886930e161e!12000036678249127!sh!UK!759559025!&spm=a2g0o.store_pc_allItems_or_groupList.new_all_items_2007523591909.1005002037442492

The final kicker is that it's the same price as it ever was but the site is smaller. Fewer accessible buildings too.

That right there is a dangerous assumption to make. It'll be set up adequately at best.

The MR Hop rubber has a very large contact patch, if that's a stock barrel the mound inside the hop rubber might not be sitting quite properly. Have a look down the barrel and check to see that it's free to move up and down properly. Did you order a better barrel by any chance?