Fatboy40 Posted March 26 Share Posted March 26 Some other discussions online are leading me down a dark path, in that I quite fancy building (for the fun of it) a "Wanker Gun". So far all of my airsoft toys have been focussed on a snappy semi-auto, overall range, DMR or bolt-action but I fancy building an AEG that's got a stupidly fast full auto (even though I probably won't be able to actually skirmish with it). The weirdness in me though wants it to be an AEG and also be single sector, not a DSG, and a brushed motor (no HPA on this journey baby). A strong springed mid-cap magazine would also be used, I've a few PTS EPM1's, to feed it. Has anyone else gone down this route and do you have any advice? (other than don't f**king do it). If you've dabbled what sort of RPS did you achieve? (as an aside I want to do this with a Double Eagle M900 AEG, so hopefully I can find a cheap used one). Link to comment Share on other sites More sharing options...
Skara Posted March 27 Share Posted March 27 Doable, but I found that past a certain threshold (say 30 rps) it's much more convenient to build a DSG instead. I managed, by mistake, 36/37 RPS on a single sector gear running off 12:1s and 36k warhead but I had to shortstroke the sector by 4 teeth to achieve proper timing.. You will need a very good tappet plate and spring because the poor thing will be the most stressed component as it has to reciprocate at ludicrous speeds almost 40 times a second. Rogerborg and Fatboy40 1 1 Link to comment Share on other sites More sharing options...
agors Posted April 6 Share Posted April 6 are you strict to brushed? if not a 50k brushless 11.1 and 18.1 will bring you straight to 40rps. my opt.1 high speed (53k) did 42rps on 18:1 ss-4. no timing issue or any other headache. a 40k brushless will give you 33rps with 18.1 obviously it's easier to get high rps with a dsg but with brushless motors anything is possible today Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted April 6 Supporters Share Posted April 6 Mags are key. None of mine will feed fast enough to satisfy stock JG G36 gears and ~1.1J spring, stone-age brushed Big Dragon M140, 11.1V 1.4Ah 30C, and slightly chonkier wiring with Perun AB++. I don't even know what rps it's running at because... well, the mags won't keep up. 5 round burst tends to get off 3 or 4 BBs. Once you start down the path of wankergunnery, you're going to keep running into one limit after another, so just dive in and solve the problems as you find them. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now