Moderators Popular Post Jez_Armstrong Posted October 20 Moderators Popular Post Share Posted October 20 I'm starting this up as a reference thread for everyone's photos of G3's Tackle, GruntInfantry, Zarrin and 4 others 2 5 Link to comment Share on other sites More sharing options...
Popular Post JimFromHorsham Posted October 20 Popular Post Share Posted October 20 Very nice here’s my pair , Umarex G3A3 with original furniture Umarex PSG-1 , LOGA tripod & as close as I could get to a correct ish scope 😛 John_W, ButcherBill, Zarrin and 3 others 5 1 Link to comment Share on other sites More sharing options...
ButcherBill Posted October 20 Share Posted October 20 Got several other H&K's but only these 3 G3 variants. Nick G, Zarrin and Hudson 3 Link to comment Share on other sites More sharing options...
Enid_Puceflange Posted October 24 Share Posted October 24 Bog stock standard JG G3 thing Hudson, John_W and ButcherBill 3 Link to comment Share on other sites More sharing options...
Hudson Posted October 24 Share Posted October 24 Adding Mine that have already been on here in a different thread, but why the hell not? ButcherBill and Nick G 2 Link to comment Share on other sites More sharing options...
BigAl Posted October 24 Share Posted October 24 Away Jez get the MC51's ( G3 SBS & G3K ) fitted with a proper 7.62 cocking ube and handle. letting down an otherwise remarkable collection. Do you still own all of those? Link to comment Share on other sites More sharing options...
Moderators Jez_Armstrong Posted October 24 Author Moderators Share Posted October 24 35 minutes ago, BigAl said: Away Jez get the MC51's ( G3 SBS & G3K ) fitted with a proper 7.62 cocking ube and handle. letting down an otherwise remarkable collection. Do you still own all of those? No the only two I have left now are these Zarrin and Nick G 2 Link to comment Share on other sites More sharing options...
BigAl Posted October 24 Share Posted October 24 Shame mate, would have been a hell of a collection. Hope TM does G3 and HK33/53 NGRS and GBBr next. Link to comment Share on other sites More sharing options...
Anonymoose Posted October 25 Share Posted October 25 22 hours ago, Hudson said: Adding Mine that have already been on here in a different thread, but why the hell not? Was it easy to find that foregrip/bipod? I'd like to build a DMR just like that on the Umarex G3 base. Link to comment Share on other sites More sharing options...
Hudson Posted October 25 Share Posted October 25 Well it just came with the gun. Idk if you can source one new separately, so it'd probably have to be acquired second hand. Anonymoose 1 Link to comment Share on other sites More sharing options...
Anonymoose Posted October 27 Share Posted October 27 On 20/10/2024 at 13:01, Jez_Armstrong said: This is exactly what i want to build. 😍 Jez_Armstrong 1 Link to comment Share on other sites More sharing options...
Johndaniel4863 Posted October 30 Share Posted October 30 My LCT G3 was going to sell it but after getting it out the box realised how great it feels...then ended up getting their HK33 too! John_W, ButcherBill and Nick G 3 Link to comment Share on other sites More sharing options...
Popular Post Nick G Posted October 30 Popular Post Share Posted October 30 My Umarex / WE GBBR. Shoots very well, has a loud crack and a decent recoil , capable of massivly over hopping .30's on the stock setup.. As with the rest of my WE GBBRs I've not had a single issue with it. ParHunter, Zarrin, Johndaniel4863 and 5 others 6 2 Link to comment Share on other sites More sharing options...
Popular Post Zarrin Posted November 3 Popular Post Share Posted November 3 (edited) I've wanted a G3 for the best part of 20 years, not sure why it's taken me this long to finally get one, and by one.. I mean a G3 and all the bits n bobs to claim five guns in one 😁 - such a modular system for it's time 😎 Started off life as a Classic Army G3SG1 Standard G3A3 config with the slim hand-guard, no rail up top, bare bones... still probably my favourite config (LCT hand-guard and stock added) : G3A4 with slim hand-guard: This is how I've currently got it setup... but where does the battery go? 🙃 Then we have the A4 with the wide hand-guard; with bipod in this case, technically making it the cod4 configuration I believe: Then the A3 with wide hand-guard - my least favourite config tbh: And then finally the G3SG1 : A few notes and ramblings on this project: By some measurements of an HK RIF this CA was a piece of crap - cocking lever made of literal margarine came flying off after maybe 5 slaps... wth is the point in having an HK replica if I can't slap the crap out of it. Anyway replaced that with a steel LCT cocking lever. slap slap slap slap... too many times a day 😏 - needed some minor modding to fit well with the CA cocking tube. The LCT furniture is NOT compatible with the CA (TM) style body and front set - both slim hand-guard and OD stock needed an annoying amount of dremeling and filing to get them to fit - but they did... eventually. LCT ribbed magazine also needed work - too tight of a fit for the CA metal body - filing of the shell needed as well as the well known fix for LCT mags - shim up from the bottom to raise the feed lips to get it to feed reliably. I've wired in a second battery harnesses through the receiver - one to the front for A4 and one to the back for A3 configs respectively. A4 stock mod 1 - added lock grooves all the way along the sliders to allow one inch increment stock position adjustments, the Original A4 stock had two positons, fully open or fully closed - I like to run mine 1-2 inches shorter than fully open: A4 stock mod 2 - I love the look of these, however they are quite uncomfortable as they sit into your collar bone, firing a real .308 off of one must be nasty. Replaced the hard rubber but pad with an inch of EVA foam cut to shape and screwed in using the original holes: I plan to add some sort of cheek riser/pad to the A4 system, thinking maybe canibolising an SVD one 🤔 Finally the most annoying mod I had to carry out was to excavate five tons of material out of the LCT slim hand-guard in order to fit a 1300mah 11.1v lipo inside around the barrel - but it's working great now and surprisingly is not that difficult to get the battery in. Edited November 3 by Zarrin Nick G, Sd96, Hudson and 5 others 4 4 Link to comment Share on other sites More sharing options...
ButcherBill Posted November 3 Share Posted November 3 Very cool, but... Any chance you could have all the mags facing all the same way in the triple mag pouch? John_W, Zarrin and Nick G 3 Link to comment Share on other sites More sharing options...
Zarrin Posted November 3 Share Posted November 3 (edited) 6 minutes ago, ButcherBill said: Very cool, but... Any chance you could have all the mags facing all the same way in the triple mag pouch? Haha my OCD trap was tripped! 😂 Edited November 3 by Zarrin ButcherBill 1 Link to comment Share on other sites More sharing options...
Anonymoose Posted November 3 Share Posted November 3 On 27/10/2024 at 19:31, Anonymoose said: This is exactly what i want to build. 😍 aaaaaaaand last night i bought a G3, and all the neccessary parts to make it how i want. Whoops. Nick G and ButcherBill 1 1 Link to comment Share on other sites More sharing options...
Anonymoose Posted November 11 Share Posted November 11 (edited) Not finished yet. Needs the black pistol grip, black cocking lever, i also want to get a Navy lower to convert it. Scope mount will be modified to remove the rail, and attach the rings directly to it to lower the scope. not so fond of the ribbed magazines. Tempted to mill them flat to just have the grooves. Edited November 11 by Anonymoose Link to comment Share on other sites More sharing options...
ParHunter Posted November 13 Share Posted November 13 On 30/10/2024 at 20:32, Nick G said: My Umarex / WE GBBR. Shoots very well, has a loud crack and a decent recoil , capable of massivly over hopping .30's on the stock setup.. As with the rest of my WE GBBRs I've not had a single issue with it. For me that’s how a G3 should look like, not all that other fancy modern stuff 😉 The G3 was my service rifle back in the Cold War and it looked just like that one. Now if the recoil could give you bruises then you are on to a proper replica! You should get a long leather sling to go with it. Can’t remember how it attached to the top of the hand guard though. Nick G 1 Link to comment Share on other sites More sharing options...
Anonymoose Posted December 7 Share Posted December 7 Now with correct bipod, modified (lowered) scope mount and genuine HK navy lower. ButcherBill and Nick G 1 1 Link to comment Share on other sites More sharing options...
Nick G Posted December 7 Share Posted December 7 1 hour ago, Anonymoose said: Now with correct bipod, modified (lowered) scope mount and genuine HK navy lower. Very nice ! GBB ? and if so, how tricky was it to fit the genuine lower ? Link to comment Share on other sites More sharing options...
Anonymoose Posted December 7 Share Posted December 7 13 minutes ago, Nick G said: Very nice ! GBB ? and if so, how tricky was it to fit the genuine lower ? Yes, it's a VFC/Umarex GBB. The lower was a direct fit. I just bought the empty lower and the VFC trigger pack dropped straight in. You do need a matching fire selector for the navy lower as it's longer than the one for stamped lowers. Only took a couple minutes to swap over. Nick G 1 Link to comment Share on other sites More sharing options...
Nick G Posted December 7 Share Posted December 7 32 minutes ago, Anonymoose said: Yes, it's a VFC/Umarex GBB. The lower was a direct fit. I just bought the empty lower and the VFC trigger pack dropped straight in. You do need a matching fire selector for the navy lower as it's longer than the one for stamped lowers. Only took a couple minutes to swap over. Thanks. I'm tempted to do the same on my WE/Umarex one. Link to comment Share on other sites More sharing options...
Anonymoose Posted December 7 Share Posted December 7 20 minutes ago, Nick G said: Thanks. I'm tempted to do the same on my WE/Umarex one. It's worth doing if you prefer the navy lower. Very easy to swap over. I bought the parts from HK Parts in the US. They won't ship internationally though, so you need someone in the US to ship the parts on to you. Nick G 1 Link to comment Share on other sites More sharing options...
Darkmikey22 Posted December 7 Share Posted December 7 ButcherBill, Anonymoose and Nick G 2 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now