Moderators Tackle Posted September 13, 2018 Moderators Share Posted September 13, 2018 16 hours ago, Reedy2509 said: Soooooo anyone else seen this? https://www.popularairsoft.com/news/tokyo-marui-mtr16-gbb-26-september-release Might actually be the rifle that persuades me to pop my gbbr cherry 🍒 Link to comment Share on other sites More sharing options...
Wo1f Posted September 13, 2018 Author Share Posted September 13, 2018 Don’t like the look of it personally, but I do want those mags Link to comment Share on other sites More sharing options...
j_brujah Posted September 23, 2018 Share Posted September 23, 2018 great topic, waiting to buy my MWS (mainly because I don't know if I will have with whom to play, non german speaker in Germany ...). Until then I started researching in mods so, I found these as a safer/easier alternative for the green gas mod:https://eagle6.co.uk/shop/catalog/product/view/id/575/s/laylax-nineball-magazine-gas-injection-valve-set-black-for-all-gas-series/ I hope they work Link to comment Share on other sites More sharing options...
Davegolf Posted September 23, 2018 Share Posted September 23, 2018 Just take your full valves out, pull out the full tubes and cut them in half, then push them back in. There is absolutely nothing unsafe with this mod. And you've still got genuine TM valves. Tackle 1 Link to comment Share on other sites More sharing options...
j_brujah Posted September 24, 2018 Share Posted September 24, 2018 Well, apparently it's not so easy to pull out the tubes from the valves, some people resorted to using a vice and other crazy stuff :). And with the cutting, somebody managed to cut too low and damage the valve in the process, that's why I was thinking it's easier/safer to just replace them with shorter ones. Meanwhile, I found this interesting chart: http://gtaassos.forumactif.fr/t974-comparatif-puissance-des-gaz Link to comment Share on other sites More sharing options...
Wo1f Posted September 24, 2018 Author Share Posted September 24, 2018 It’s honestly super simply. Sammo has a PHD in breaking things, which is why he broke his 😂 get one one of those cheap pipe cutters and do it that way if you can’t pull it off, or take some thin nosed pliers and peel the tube off. The metal is really soft Link to comment Share on other sites More sharing options...
sonofsammo Posted September 24, 2018 Share Posted September 24, 2018 1 hour ago, Wo1f said: It’s honestly super simply. Sammo has a PHD in breaking things, which is why he broke his 😂 It's not simple...... It's evil. You read - x will pull off... then it doesn't cos the feckers started gluing the tubes in. You'll notice the videos of the green gas mod skate over this aspect. It's easy if you're used to doing such things - if you're not (like me), ask a friend who is good at such stuff to do it for you 😄 However - I can safely say that the mod is well worth it, as I now get full mags and bolt lock! Woooohoooo! (Thanks @rocketdogbert 😉 ) Link to comment Share on other sites More sharing options...
j_brujah Posted September 24, 2018 Share Posted September 24, 2018 yeah, never mind, I don't think they fit, watching Badabing's mag disassembly video and they don't look similar at all. I think they're for the marui pistols ... Link to comment Share on other sites More sharing options...
j_brujah Posted September 24, 2018 Share Posted September 24, 2018 ok, now I got it the valve itself (the 5 mm part - MGG2-84) and the big tube with the large threading (MGG2-83)are two different parts. So for safety, before cutting, perhaps the valve can be unscrewed. (MWS manual below) P.S. : sorry if i'm getting annoying with this subject Link to comment Share on other sites More sharing options...
Davegolf Posted September 24, 2018 Share Posted September 24, 2018 On the old mags the fill tube (MGG2-83) used to simply pull out of the fill valve (MGG2-84). I personally havnt had my hands on the new(?) mags, but looking at that image it does indeed look like they two parts unscrew from each other. Either way yes you want to remove the fill tube and cut it in half roughly, I go 10mm longer than the needle on the fill valve. This ensures theres plenty of room for gas rather than overly liquid. Its good practice to have a good look inside the mag and check there is no swarf or debris in there, blow it out, lube the seals with silicone oil and reassemble with some weak threadlock to the screws. Partially fill with good oiled gas and rotate the mags so the oil can settle into the seals etc. Link to comment Share on other sites More sharing options...
j_brujah Posted September 24, 2018 Share Posted September 24, 2018 Sounds fair but about leaving some tubing, a lot of people just remove them completely and personally, I was thinking to cut as short as my future tool that I don't have yet will allow. Yet you say 1cm over the valve would be better ? Basically we're getting slightly into the topic of what that tube actually does. Does it limit the volume ? does it have something to do with the state of the gas inside the mag ? Badabing for example was reporting fps variations in his green gas mod video and some people in the comments were actually saying that the tube regulates the state of the gas inside (liquid/gaseous) .... any insights about this ? Link to comment Share on other sites More sharing options...
Davegolf Posted September 24, 2018 Share Posted September 24, 2018 Exactly. If you completely remove the tube and the mag is fully topped of with gas (liquid) then there is a very large variation in FPS output due the larger extremes of pressure in the mag, as well as the increased potential of liquid gas vent if first shots are at an extreme angle (IE shooting up or down from a tower for example). The whole idea of the tube is to create a volume for gas. The original TM tubes do this to the extreme limiting the amount of gas storage available. By leaving some tube your having your cake and eating it - more gas capacity / shots per mag and good shot to shot consistency. Link to comment Share on other sites More sharing options...
Wo1f Posted September 24, 2018 Author Share Posted September 24, 2018 1 hour ago, j_brujah said: Sounds fair but about leaving some tubing, a lot of people just remove them completely and personally, I was thinking to cut as short as my future tool that I don't have yet will allow. Yet you say 1cm over the valve would be better ? Basically we're getting slightly into the topic of what that tube actually does. Does it limit the volume ? does it have something to do with the state of the gas inside the mag ? Badabing for example was reporting fps variations in his green gas mod video and some people in the comments were actually saying that the tube regulates the state of the gas inside (liquid/gaseous) .... any insights about this ? Basically, from what I understand... removing the zinc tube will allow you to get more into the mag. More liquid green gas= more shots. However... consistency suffers a little. By leaving a 5-10mm over the end of the valve you have a a good middle ground. You’ll get less shots over all, but you’ll have a more stable FPS which means your gun has the potential to be a touch more accurate vertically. Link to comment Share on other sites More sharing options...
Davegolf Posted September 24, 2018 Share Posted September 24, 2018 Echo Wo1f 1 Link to comment Share on other sites More sharing options...
Wo1f Posted September 24, 2018 Author Share Posted September 24, 2018 The proper, scientific answer and the “because it bloody does” answer 😂 Davegolf 1 Link to comment Share on other sites More sharing options...
j_brujah Posted September 24, 2018 Share Posted September 24, 2018 Thanks guys, awesome "double post" Wo1f 1 Link to comment Share on other sites More sharing options...
j_brujah Posted September 30, 2018 Share Posted September 30, 2018 Well, I went ahead and bought the stuff, gear and MWS (no sidearm for now) and besides getting over the dizziness of paying that much in one day ... I did a weight estimation, and it seems my beloved gear will weigh about 14.5 kilos (that's about 32 pounds) and if I get the pistol and mags, holster and what not, a red dot and a flashlight I will be at 17 kilos (~37.5 pounds) so .... HOLY SHIT Wo1f and sonofsammo 2 Link to comment Share on other sites More sharing options...
Davegolf Posted September 30, 2018 Share Posted September 30, 2018 Oh yeh great workout for sure! i find the gun itself is quite well balanced, you need a sturdy comfy rig for the mags, they're the dead weight! sonofsammo 1 Link to comment Share on other sites More sharing options...
sonofsammo Posted September 30, 2018 Share Posted September 30, 2018 6 hours ago, j_brujah said: Well, I went ahead and bought the stuff, gear and MWS (no sidearm for now) and besides getting over the dizziness of paying that much in one day ... I did a weight estimation, and it seems my beloved gear will weigh about 14.5 kilos (that's about 32 pounds) and if I get the pistol and mags, holster and what not, a red dot and a flashlight I will be at 17 kilos (~37.5 pounds) so .... HOLY SHIT HE'S ONE OF US! HE'S ONE OF US! HE'S ONE OF US! Kayzeroth, j_brujah and Davegolf 3 Link to comment Share on other sites More sharing options...
Wo1f Posted September 30, 2018 Author Share Posted September 30, 2018 Highly reccomend a plate carrier for the mags. The stuff plate spreads the load evenly and stops them flapping around and winding you lol Link to comment Share on other sites More sharing options...
j_brujah Posted September 30, 2018 Share Posted September 30, 2018 yup, got this one 1,5 kilos ... pfff, also flecktarn because, when in Rome... Link to comment Share on other sites More sharing options...
sonofsammo Posted September 30, 2018 Share Posted September 30, 2018 7 hours ago, j_brujah said: yup, got this one 1,5 kilos ... pfff, also flecktarn because, when in Rome... What make/model is that? Link to comment Share on other sites More sharing options...
j_brujah Posted October 2, 2018 Share Posted October 2, 2018 Invader Gear DACC plate carrier, arriving Thursday. Meanwhile, those Marui mag pipes better start trembling Wo1f 1 Link to comment Share on other sites More sharing options...
Davegolf Posted October 3, 2018 Share Posted October 3, 2018 WOWZA! Link to comment Share on other sites More sharing options...
Wo1f Posted October 3, 2018 Author Share Posted October 3, 2018 Now that’s a pipe cutter lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now