Gun picture thread

[Lyndication]

https://youtu.be/xgV8ZByAF4s?si=RqkBJxwnSlKP0NZb

 

Oh YouTube doesn't auto embed. rip

Edited September 12 by Lyndication

[danp96]

My first MWS, lovely bit of kit. Its a TM CQBR Block1

[Darkmikey22]

Lambda MK48. Weathered best I could back to the grey underneath, as per the real thing. 

Not sure I'm a fan of the suppressor.... 

But hey ho. 

[mightyjebus]

TM AK102 NGRS. Bought 2nd hand and thought I'd gotten a bit of a deal but turns out the previous tech work was very damaging. It looks like the original problem was the little nub that allows safe, semi, full auto had snapped but instead of fixing or fitting a new nub the tech had modified the selector plate, cut a new full auto slot in the receiver, removed the plate that stops the trigger from moving on safe and fitted the worlds biggest fuse holder under the front handguard.

cue designing and printing a new safety plate, drilling and pinning a new nub into place, fitting a eagle6 AK selector and adding a leviathan, filling in the new selector marking with JB weld and then sanding and painting the receiver. Since I had it in bits I fitted a steel stock catch (TM one has a habit of breaking if you drop the AEG), heavily modified a lower foregrip to fit the NGRS (much drilling, sanding, grinding and then painting). Also fitted a mock Bulgarian flash hider as it came with the AK105 bell flash hider and not the TM AK102 one. It came with a upgraded inner barrel, gears and spring and is sitting nicely at 340 on a .2

 

Edited September 13 by mightyjebus

[aragoth]

My first VT 🤙

[Rickwales]

Another purchase from Stryderb (Sam) from here. Absolutely love it, phenomenal rate of fire. (26 rps) Couple of free mags as well. Can't wait to get a tracer for it. Thanks Sam. 

[GRIZZLYBEAR]

I was comparing felt recoil on my VFCs this afternoon and took the opportunity for a family photo.  

[Lyndication]

23 hours ago, GRIZZLYBEAR said:

I was comparing felt recoil on my VFCs this afternoon and took the opportunity for a family photo.  

 

What's the ranking?

[GothicGhost]

On 12/09/2025 at 17:23, danp96 said:

My first MWS, lovely bit of kit. Its a TM CQBR Block1

Very nice 🤌

[Quagmire]

Here's my M4 (Specna Edge), my brother's M16 (Specna Core I think) and my XM177 (E&C).

 

The M4 has a Perun hybrid, 14:1 gears, solid bushings and compression set from Mr Ak2m4, motor is a bit of a mutt I built by putting the armature from a high torque motor into the case of a high torque, high speed one from AliExpress. Barrel is the original brass Specna 6.03 and uses a Macaron 60 hop rubber, omega nub. It shoots like a laser (in Airsoft terms) and has decent range. ROF is about 23rps on 2s I think? 

 

The M16 is bone stock and this also shoots fantastically, with decent range too- my brother is going to leave that as is. He has great fun blasting people with the 203 too, usually accompanied by giggling...

 

The XM is my favourite to look at, the trades are fantastic and I love the old school integrated carry handle over the M4's detachable one. It has an upgraded compression set and nozzle, again from ak2m4, and a 6.02 stainless barrel. Hop is the same as the M4. It's running 16:1 gears and I have a Perun hybrid on the way for it. The problem I have with the XM is that it does not shoot as accurately as the M4, I get the odd curler which goes off to the side now and then. I may remove the barrel and try to polish it a bit to see if that helps at all...

 

[Devvo]

Maruyama SCW-9 SD2

[Austeyr]

Rebuilt an old S&T IDZ Stock to fit to my VFC after discovering a new one would cost £40+ from China. Also managed to fit an S&T "Enhanced" Gas Block to my standard VFC barrel meaning I don't need to take a gamble on Clutch Precisions shitty QC just for the sake of having a "correct" gas block. All that's left to do now is get the KA4 top rail to replace the plastic IDZ and then my VFC G36KA4 GBBR will be "done" (It never is done though, lets be real...)

[Lyndication]

15 hours ago, Austeyr said:

I don't need to take a gamble on Clutch Precisions shitty QC just for the sake of having a "correct" gas block.

 

CP: not even once.

 

 

My weird son had a really good game day yesterday. Handy enough skirmish with, but the range and accuracy of a BASR.

Edited 3 hours ago by Lyndication

[Austeyr]

1 hour ago, Lyndication said:

not even once

Their hop unit tdc thingy for the g36 looks good, hopefully the ka4 rail isn’t bad too as it’s essentially all one piece… 🤞

[Lyndication]

17 minutes ago, Austeyr said:

Their hop unit tdc thingy for the g36 looks good, hopefully the ka4 rail isn’t bad too as it’s essentially all one piece… 🤞

 

Have you seen the Jaeger video where he looks at their STANAG conversion? Wow what a hunk o' junk.

 

Apparently the MG36 barrels were sent out wonk on a few batches, and they made the muzzle device bores too narrow so they chopped BBs as well. 

 

I don't think I'd trust them to make something as tightly toleranced as a TDC hop. 😅

[Austeyr]

15 minutes ago, Lyndication said:

 

Have you seen the Jaeger video where he looks at their STANAG conversion? Wow what a hunk o' junk.

 

Apparently the MG36 barrels were sent out wonk on a few batches, and they made the muzzle device bores too narrow so they chopped BBs as well. 

 

I don't think I'd trust them to make something as tightly toleranced as a TDC hop. 😅

 

Yeah, I've heard all of the horror stories! Their barrels also cause pews to go into full auto due to the barrel QC causing them to slide more inwards. Sadly to my knowledge they're the only ones making steel barrels and the correct KA4 parts though 😢

 

I just tested my G36 and the gas block comes loose from the recoil, the handguard seems to retain it though so I may just put up with a wobbly gas block rather than a terrible barrel 😂