Oshia Posted November 14, 2013 Posted November 14, 2013 Main weapons I use. rexfan10, Monty, Scott M and 1 other 4
Cipher Posted November 14, 2013 Posted November 14, 2013 My main AEG. Yes,you know, the transition sight is useless for airsoft.
Oshia Posted November 14, 2013 Posted November 14, 2013 My main AEG. Yes,you know, the transition sight is useless for airsoft. Who cares, it looks cool!
Supporters Ian_Gere Posted November 14, 2013 Supporters Posted November 14, 2013 My main AEG. Yes,you know, the transition sight is useless for airsoft. no it isn't - just move your head, not tip the gun to an angle - there's no reason anybody can't aim over sights that aren't vertical AirsoftTed 1
CaptainSwoop Posted November 14, 2013 Posted November 14, 2013 That's how a Bren Gun sights worked, the vertical magazine on a Bren means the sights have to be off to the side.
TacMaster Posted November 15, 2013 Posted November 15, 2013 They weren't at such a crazy angle though
Supporters M_P Posted November 15, 2013 Author Supporters Posted November 15, 2013 They weren't at such a crazy angle though Doesn't matter, you cab still use these holding the gun normally so shouldn't have any adverse effect- though assuming the user is right handed, they would be better off on the other side of the rilfe Ian_Gere 1
Cipher Posted November 15, 2013 Posted November 15, 2013 That's how a Bren Gun sights worked, the vertical magazine on a Bren means the sights have to be off to the side. OK! jcheeseright 1
CaptainSwoop Posted November 15, 2013 Posted November 15, 2013 See in this picture they are off to the left of the gun
CaptainSwoop Posted November 15, 2013 Posted November 15, 2013 I would think though on an M4 with the sights off at an angle it would be best to tilt the gun so the sights are vertical, you will get a better sight picture and the fall of shot will be in line with the sight.
Supporters M_P Posted November 15, 2013 Author Supporters Posted November 15, 2013 I would think though on an M4 with the sights off at an angle it would be best to tilt the gun so the sights are vertical, you will get a better sight picture and the fall of shot will be in line with the sight. The shot fired wouldn't be in line though- due to the hop up still in effect the bb fired would shoot off diagonal upwards to the left. CaptainSwoop 1
Supporters jcheeseright Posted November 15, 2013 Supporters Posted November 15, 2013 indeed, on a REAL M4 canted ironsights are a great idea as a backup if you have a magnified sight on top since rifling doesn't care about alignment of the gun... on an airsoft gun though hop-up with f**k you in the ass.
Supporters Ian_Gere Posted November 15, 2013 Supporters Posted November 15, 2013 Not at all. If you tilt the gun so the sight is vertical, yes, obviously; but if you simply aim over the angled iron sights, you're totally in business. We're not talking about trying to get good groupings, we're talking about hitting man sized targets at ranges where a magnified sight is a hindrance, ie right in front of you, ffs! CaptainSwoop 1
Supporters TheFull9 Posted November 15, 2013 Supporters Posted November 15, 2013 Hop doesn't kick in immediately with a titled gun (at least when I've experimented) and if you're using canted irons/an RDS you'll only be aiming with that backup because somebody's too close for your other optic. There'll probably be a bit of 'dead ground' in between the maximum straight flight distance of your BBs with the gun canted and the minimum useful range of the primary optic, but that's not too big of an issue IMHO. Ian_Gere 1
CaptainSwoop Posted November 17, 2013 Posted November 17, 2013 Rebuilt Classic Army M15A1. Added Magpul front end and Stock, shortened Barrel. Still have to change wiring to front end but I think a LiPo will fit in to the Stock Tube, there is even a little cover in the end of the stock that snaps on and off to allow access. Monty and Airsoft_Mr B 2
TacMaster Posted November 17, 2013 Posted November 17, 2013 If you remove the cover on the end of the buffer tube you'd probably be able to fit a small Lipo or stick Nimh in it. HSCtheta7 1
CaptainSwoop Posted November 17, 2013 Posted November 17, 2013 It's already removed and I have measured it up for a LiPo already I will have to perform surgery somewhere to get the wires through.
CaptainSwoop Posted November 17, 2013 Posted November 17, 2013 Here is the other CA just kept as I got it but refurbed. Not bad for a £12.50 gun.
CaptainSwoop Posted November 18, 2013 Posted November 18, 2013 I got them when Gun Ho closed down they sold me two of their rental guns for £25. Cosmetics were a bit worn but the Gearboxes were still solid. I re-bushed and shimmed them, re-lubed and replaced one piston that had worn teeth. All good to go again. I sohuld add in the cost of the Magpul parts though
Popular Post two_zero Posted November 19, 2013 Popular Post Posted November 19, 2013 krinkov time again! quite happy with how it turned out.. havn't paid too much attention to the left side thou, and might add more "dirty" in the future. but for now! Pistol: Carbine right side:Carbine left side: Monty, Ian_Gere, SgtTalbert and 5 others 8
trinityadam Posted November 23, 2013 Posted November 23, 2013 Well heres my RIFs went for artistic hope you like.
Unrustle_Thine_Jimmies Posted November 23, 2013 Posted November 23, 2013 Ahhh,the Maru *CRRRRRRRRRRRRRKK CRKKKKKKKKKK* G *CRRRRRRREEEEEEee*. Nice piece of *CREEEEEEEEAAAAAAAAAAAA*ame it's so *CRREEEAAAAAAAAAAAA* creaky and the charging handle isn't too strong so HK slaps ha *CRRRRRRRRRRRRRRRRRRRRREEEEEK* minimum. Seriously though, some company should get up off their arse and make a G3, not utilizing 20 year old standards and pot metal. And make it full steel. For maximum HK shlaps. And make a GBB one too. Or TM should make a recoil shock G3. I'd trust them to not make the cocking handle pot metal.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now