n1ckh

The mag unwinds when there's not enough ammo in the mag You could get some mid caps from eBay, Taiwan gun or from China in packs of 5 or 10

1st thing I'll ask is....... What era is this film based on ?? no point using a weapon from 'alien' if its set during the Crimea war

Not been to one of these events but would so love to If you haven't paid yet then there's nothing to worry about

I've been hit by them a few times even at about 150m away and they sting like a biatch, especially on tender areas like the head and neck when uncovered I always take a mesh mask but mainly use it when hpa rifles are around

Weather can play a big part in where your bb's hit, use heavier ammo and adjust your rifle If it curves left, move your rifle to the right and vice versa If it drops down, raise the rifle, again vice versa

Leave it alone mate I upgraded the piston, cylinder head and air nozzle on mine for better air seal (the piston teeth got worn right down) and put in a high speed motor but put a lower spring in to be inside site limits, I did this as the gear box was open anyway Next to go in is a delay chip to pull the nozzle back a bit more and hold it there a bit longer

I'd get a few spares mate Women always say that don't have enough shoes, bags blah blah blah Blokes can never have enough tools, weapons, battery's etc

Christ, I got 4x 5000mah 7.4 lipos, they should last about 3 to 5 dsys then in that case

Even using a 1600 mah 8.4v NiMH, I still swap them out when its lunch time I forgot to do this when my eldest son was using one of my rifles, the battery was hot because it couldn't supply the current needed for the motor and was just heating up I haven't touched it for a month to let the cells settle and fingers crossed its not knackered ??

I kind of like it, take of the rail and put a scope on it How did you mount the stock ?? I might try that myself

You can either solder the motor wires (but how can swap out motors) or get gold plated connectors

That makes sense now to me (duuuuh) I'm the same, someone helps me immensely that in return I will always give loyalty to them Just use your pocket or a pouch, that's what my sons do when they use my Beretta, granted I've put my old holster in the pouch aswell but that means nothing hanging off there leg & no more lost mags

What the hell is a talking train ?? or is it just a northern thing lol

They do but in my personal opinion, adapters look hidious

Does it have to be airsoft specific ?? as I doubt you'll be paid for it cause you won't be on the books Not sure if there's anything other than a paper round where you can get money My dad used to match whatever I made each week but I had 3 paperounds, morning and afternoon 6 days a week

Is the £40 what you were charged to be added to ukara database ?? If so, that's not right as its free but if your site membership is £40 a year then in my opinion, something's wrong somewhere Just wear civilian clothing with decent boots mate plus eye protection and gloves, you can build up your load out over time

Usually membership is free (but some sites do charge) and you just pay for the game day your attending, the letters before your 5 digit number is the site you are a member off And yes your now a member and have a defence for IF for some reason the old bill pull you over and your kits on the back seat or in the boot

Challenger 2 barrel with the rail for iron sights

Like I said mate, they do make a difference, better current rate to the motor which means better rate of fire and trigger response, even better if using lipo I did hook up a watt Meyer (little box that measures all sorts of battery rates and consumption) but can't remember the exact read outs

Haha, I can see this turning into a 'what goes best with a 36c rail' thread

Coming from racing rc vehicles and boats, I can confirm deans make a big difference over Tamiya, much more contact area and better conductive current material Tamiya is upto 20a current Deans is upto 40a current

That would certainly be ummmmm........yeah colonel Tri shorty with a g36 rail

I think you'll find that's a negative, I was thinking the same thing until I measured everything, standard picatinny is 20mm the g36 mounting picatinny is 11mm

Yes you can, if you get something like an iMax B6 from ebay, it comes with different charge leads for different battery's

They're easy to fit but like anything, its daunting the first time you do it You can go on eBay and get them with pre soldered wires, just snip off the amount you need from the battery & connector, wire together, solder the joints and some heat shrink, job done