AK47frizzle

For gearbox: The current shell is fine, buy some shs 13:1 or 18:1 gears, shs high torque motor, shs steel toothed piston, actually, just buy a complete shs 13:1 tune up kit for a v3 gearbox and a shs high torque motor, sorted.

Now I don't have to hunt you. I seriously hate HP.

NOW THAT, is quality. My friend has the same one but with an i5 instead and that can play bf3 and gta 4 with decent frames.

For the love of god, don't get support HP by buying their products. If shit happens or you need to contact them, they won't be arsed. The're not built that great either, many have had overheating issues and yet HP has an ivory tower mentality; they won't give two shits. I'd recommend Asus, Dell, lenovo or Acer. If you get that HP, I will personally come over to your house, smash open your doors, call an SAS team, shoot down your windows, egg your family and pour boiling hot HP sauce all over that shyte HP piece of crap. Then i'd slap you.

You can get what i have which is within your budget and it's a Lenovo g505s with an AMD A10 APU and radeon 8650g. It can defo run sims 3. But what i would recommend for a gaming laptop is the Medion Erazer. Don't choose HP, it's known to be a remarkably shit brand.

ghk g5 is reliable as well as the ak74 and the akm

I hear that they are the best quality bbs but they stink like skunk spray; you'll drop the bag and run as far as possible when you open the them

You need to clean your monitor! That bastard is screaming for care and a good clean

It could be: Your piston may be faulty or badly made You haven't aligned it correctly Or your spring is quite bad and it's overlapping when compressed

I shoot out from that window and, you know how AK sights are very high above the actual barrel? Yeh, I aim at the target, shoot, then the bbs ricochet off the bottom and hits the window frame quite hard.... i'm so lucky to have no hit the window yet... the ricochets explain the line splintered wood along the bottom... When they don't ricochet onto the window frame, those bastards hit me in the face 10/10 times. There's not one time it's not hit me in the face. You can see the bb dents below the line of splintered wood.

The countless number of times I have accidentally shot my window frame literally millimetres and inches from the glass itself.

Yeah baby http://www.airsoftworld.net/dragunov-ak-svd-wood-kit.html Edit: hmmm ummmmmmmmmmmmmmm, never mind. Doesn't fit.

Dayum, if only it count as a two tone weapon......

Tbh, I don't think any mount would cut it. I can't see any mount being that precise in measurements. Just get something like this as a bundle: http://www.ebay.co.uk/itm/Airsoft-Aimpoint-M2-Red-Dot-Sight-3X-Magnifier-w-QD-Flip-To-Side-Mount-Combo-/271445369327?pt=UK_SportingGoods_OtherSports&hash=item3f3367a1ef

Cool story bro.

1. Double Eagle AK47 externals, Cyma and SHS internals 2. Some 340 with 0.2g 3. 35m which is 114 feet because it's a pile of wank.

Any gun with an m16 style body. V2 gear boxes are more for those boring variants, v3 is move interesting where you get all the AKs, mp5s, umps, etc.

Radeon 8650g, but it doesn't matter now as cropzy convinced me to build a pc and if i sell my laptop now, i'll still get a decent amount of money to fund it. Anyway, turn turbo core back on. Just gonna leave it.

Right so further investigation, I played minecraft for a bit. Immediately went down to 0.85 GHz but the thing is, before playing, each core (I have 4) was at 21 degrees C, when playing, they dropped to 14 degrees C. GPU however was at 45 C and went up to 54 C, so that's still the same as ever. If I enable turbo core again, it'll just be extremely hot and noisy. Before it started to become hot a month ago, it was playing everything fine and the speed was at or below 2.5 GHz. Hmmm.... Edit: Holy shet, the temp is 0 - 3 degrees C when turbo core in on.... wut the hell...

So for about a month, my laptop automatically overclocked and produce a tonne of heat and noise for that month and I wondered why. It is limited to 2.5 Ghz and when overclocked, it goes to max of 3.5 Ghz. This month, it's been way over 2.5, around the 3.4 region and it's been burning the wood table it's on. Yesterday, I decided to install AMD OverDrive to see the readings, and in OverDrive, I saw this option that "Turbo Core" was enabled... I unchecked it and suddenly, my laptop cooled right the feck down and I looked at the task manager readings said that the speed was at 2.45 Ghz max. Happy days! Solved it! But no... I haven't. So today i decided to play some games like I usually do, a bit of insurgency and maybe some unity 3d games for some trolling... what I got was a complimentary bag of insane lag and lowered frame rates. I then looked at the task manager and OverDrive readings and both said that the frequency of the processor was 0.85 Ghz constant during gameplay... I mean... what the fudge? Why would it suddenly lower the speed for gaming? I'm really confused.. any help?

Actually thinking about it, it shouldn't be too difficult making one yourself. Compare these: AK12: http://i1172.photobucket.com/albums/r561/ak47frizzle/battlefield-4-ak-12_zps4713b328.jpg AK47 tactical: http://i1172.photobucket.com/albums/r561/ak47frizzle/Products1325-1200x800-222054_zpsa879492e.jpg They're not far off are they? So i reckon these cosmetic changes might work: Buy a railed version of a dust cover, hammer out the insides so it more blocky like the ak12's dust cover, then you can cut out metal on both sides to have space for the 2 changing handles. Next you can take out the leaf sight and glue a rail on top of it. Since the lower handguard is right next to the charging handle, you can cut off some of the body, then you can buy a longer lower ris, cut it to the correct length and somehow mold it onto the bottom and make it align with the body. Then buy an AK74 flash hider or any sort of flash hider that closely resembles the ak12's and shove it at the end of the barrel, Then buy some magpul stock that closely resembles the ak12's Buy some Beta Project AK mags and it should be done... kind of... It's perfectly possible for someone to convert an AK to an AK12.

The we smg 8 seems to have good reviews although its not exactly an mp7, its extremely.close to one.