Qlimax

they only do that if you pay for delivery without signature. if you pay the additional £1 for signature they don't leave. they have to obtain the signature.

MyHermes. they don't scan their stuff. i've sent RIF's via them time and time again without a problem. Royal Mail although they claim if you send it via them under Special delivery it's fine, that is BS cos they are ceasing everything no matter how you sent it. Parcelforce will courier it.

Thanks mate. yeah I’m in two minds myself on it. I liked it a lot before painting it but wanted to have something a little different. Especially since myself and Hef Legend have P*’s that look near the same bar a few bits lol. I can always strip it off if I get bored.

PolarStar finally completed. It won't be to everyone's liking but I'm happy with it. Like an idiot I did a little touch up this morning and sprayed the Jack in error lol. No bigger it can be cleaned off.

There's a guy on Facebook which i believe makes them. i've had one from him before and it was great but not sure if he's still making them. i will ask him

yeah it was the same for us as well. we imported the frequency channels in via a PC using the data cable and the channels were really odd. it was a reet ball ache having to work out which channel the UV needed to be on to work with the Puxings. it's worth having a look to see if that's the problem. it may not be but we found for us that was the case.

yeah i've had this problem although they are the same frequency the channels don't work the same. you need to try another channel on the UV5r. so if your on channel 1 for the 888 you might have to have the UV5r on channel 3 for example. They are a really weird radio. This is a problem you usually find with the UV5r working with the Puxing radios. give it a try it may not be the case but it's something i've came across and it worked.

I was saying tapping mags based on an M4 or something normal. Not a GHK G5 as I know about the full valve being in a silly place. Apparently it can be done but it takes time and you've got to be very careful. At the moment I run one HPA assault rifle and have an AEG Backup. I used to have a HPA GBBR with tapped mags. Great fun but given the output PSI used to run the mags it wasn't very air efficient. There's someone who makes a fully converted GBBRs called Alyan but I had one and seriously just AVOID if anyone suggests getting one. Personally I'd buy an AEG and convert it into a P* or SMP. GBBR mags are really expensive so to buy a GBBR with mags etc will cost a lot more than an AEG and making it into HPA

Now it's coming into the colder season AEG is better than gas but like Proffink said HPA is the way to go. You can buy a GBBR and tap the mags to run them on HPA during the colder season and in the summer remove the taps, replace the gas valves and away you go to use gas again. HPA is a good way to go as its not weather dependant

Yeah exactly once you've got it setup right then it shouldn't need to be taken out. My stock came from Tiger111HK for £65 plus postage. There's a couple of UK sellers but they are £100 plus. After receiving it I found out Fubar sell a clone for like £30 or something. Yeah AP have been slow lately, it took them 6 days to dispatch my charging handle.

So what I've done is upgraded my wire harness to the 18" cable but really didn't need it but still using it, ran it into the buffer tube hooked it to the FCU and folded it back into the buffer tube. Then using a battery extension cable like what I sent to you I plugged that into the FCU and ran it into the stock. So now the only bit I move is he battery. FCU is nice and safe.

This is my final build. One thing I did with this unlike my SMP was tested the accuracy and range also the alignment of the nozzle as well so I could see the difference if any once the P* was installed. Also got an Amped IGL which I really do like. Thanks to Spatch I got my Prowin hop working again after the hop adjuster pin fell out. Now I'm running it with a prommy purple bucking and Namazu firefly flat nub.

lol. you should get one i really like it plus rather than using one of those tiny little 250mah batteries i can now use my 1000mah

think we need to talk before buying different parts as we both have the exact same trigger and selector lol

I got a G&P War Rifle for £350 and what a weapon before I gutted it to be a P*. Mots keymod rail, ambi mag release catch, Vltor upper. Range was really good too.

So it's all done and what a great looking weapon.

New butterfly charging handle for the PolarStar. It's fully finished.

WHO IS JACK SCHITT? For some time many of us have wondered just who is Jack Schitt? We find ourselves at a loss when someone says, 'You don't know Jack Schitt'! Well, thanks to my genealogy efforts, you can now respond in an intellectual way. Jack Schitt is the only son of Awe Schitt. Awe Schitt, the fertilizer magnate, who married O. Schitt, the owner of Needeep N. Schitt, Inc. They had one son, Jack. In turn, Jack Schitt married Noe Schitt. The deeply religious couple produced six children: Holie Schitt, Giva Schitt, Fulla Schitt, Bull Schitt, and the twins Deep Schitt and Dip Schitt. Against her parents' objections, Deep Schitt married Dumb Schitt, a high school dropout. After being married 15 years, Jack and Noe Schitt divorced. Noe Schitt later married Ted Sherlock, and because her kids were living with them, she wanted to keep her previous name. She was then known as Noe Schitt Sherlock. Meanwhile, Dip Schitt married Loda Schitt, and they produced a son with a rather nervous disposition named Chicken Schitt. Two of the other six children, Fulla Schitt and Giva Schitt, were inseparable throughout childhood and subsequently married the Happens brothers in a dual ceremony. The wedding announcement in the newspaper announced the Schitt-Happens nuptials. The Schitt-Happens children were Dawg, Byrd, and Horse. Bull Schitt, the prodigal son, left home to tour the world. He recently returned from Italy with his new Italian bride, Pisa Schitt. Now when someone says, 'You don't know Jack Schitt', you can correct them. Sincerely, Crock O. Schitt

Lol my bad just re-read it. Yes I am a dick head haha. Josh, you can't reuse BBs in your weapons as once shot they could be marked, chipped what ever which can do damage to your hop, bucking, barrel etc.

Used BBs wow really. There's a reason people leave them on the floor once used dude.

Component shop sell them too. I have a small 250mah for my Polarstar

looks better on the now fully finished polarstar with my just arrived Retro Arms Red Trigger. The Punisher skull isn't staying on, was bored lol.

New Strike Tactical Comp red dot.

I'll Pm you a link mate. Just need to empty my inbox out. It's what Darkmikey said a Tromix shark.

Is Daytona back in business now ? I know last year they closed. I ask because if they are still closed and something goes wrong don't know if parts would be easily available to fix. HPA is a expensive setup. My first HPA ran me to £1000 and that was before then spending money on the furniture for the base weapon. Personally I'd say for your first HPA start small price wise to see if you actually like it. I know a few guys who went big and ended hating HPA to which when selling there HPA kit they lost a lot of money, Tippmann have recoil and I've had one, brilliant piece of kit for the money. I have a 62/3000 which lasts me half to three quarters of the day. Internal upgrade wise sometimes it's a given. Not all the time but sometimes the standard inner barrel and hop simply won't cut it for HPA, example G&G hop is shocking for HPA it has two small holes either side of the adjuster arm which makes the air seal shocking thus making the performance worse. I've heard hat the best brands to use to HPA is VFC OR G&P. I'd get on some of the Facebook pages there's a wealth of information on them.