Qlimax

I’ve just built my own. Cost me roughly £550-£600 and it’s all good stuff. Problem with buying a pre-built “Gaming PC” is they aren’t actually gaming spec, well not the cheap ones anyway. You could get lets say a £400 gaming PC but the PSU won’t be to gaming spec, the RAM certainly won’t be to gaming spec, CPU Fan will be a standard cooler and not a proper Arctic cooler which it would need. The GPU will be just about gaming spec but nothing to rave about and the motherboards in those kind of PC’s are generally Gigabyte boards which are just shite.

You can get a Wolverine Inferno with a Ninja LRP and a 48/3000 tank for £370 from Beesting. that's the cheapest, the inferno is the cheapest of the lot and the LRP is the cheaper option of the regulators. then you need to fill your game tank/s so that's more expense as you'll need to buy other bits.

Sorry my bad thought the link had copied over. Anyway it's going round FB this morning. Personally think it's all BS, banning them won't change a single thing.

Seen this on Facebook and thought I’d share this to the community. In a bid to stop terrorism the EU are looking at banning and restricting all replica firearms, blank firers and decommissioned firearms. Quite clearly that won't stop terrorism at all. Please visit the link below, read the proposal and leave sensible and useful feedback on it explaining why this won't work. Numbers matter so make sure you leave feedback, and share this where you can. European Commission - Register of Commission documents European Commission - Register of Commission documents EC.EUROPA.EU

I have dude, they are good. Warrior from UKAZ forum is the owner of it.

if you get your Dwell setup right and don't have full auto going all day long you'd get all day from a tank. I use a 62ci 3000 pro tank which lasts me all day as i never come out of single shot but i also take my scuba cylinder just in case. alignment is an easy fix if it's not lined up properly.

really easy you can either buy a working second hand one and strip it out or buy it new. I bought new myself purely so i knew everything was right. Best are G&G, G&P or VFC in my opinion. Avoid things like JG. i would also recommend avoiding anything that has a blowback system is only because i built my SMP into an EBB G&G and was a complete ballache with alignment. try get something that has a standard gearbox. what ever you go for i would do full testing with it as an AEG to see how the range is and accuracy then you'll notice any differences when you change out. alignment is key with these things.

The Jack with a reg and bottle your probably looking at no more than £450 if not less mate. EDITED just looked. £395 if you have a redline reg and £385 if you a an LRP

Depends on what system you want buddy. If you have a donor weapon then a lot of the cost has gone. You have the follow PolarSta Jack Wolverine SMP or Hydra or Inferno. The Jack and Inferno are the cheaper ones. But then you'll need a regulator and bottle. Ninja LRP is the cheaper reg and is a better one in my opinion there's also the Redline reg which is more but the LRP is classed to some as the Redline upgrade. I recommend you visit Beesting Airsoft website. They sell packages. So you can pick your system with reg and bottle. Highly recommend them Danny will sort all your needs out. If you need any further help please feel ffre to pm me.

There's been another thread where we've asked for a sub forum to be added for HPA users. HPA wise I've had a few different types now some good some just shocking. Wolverine SMP was first it was ok but nothing special. Tippmann M4 second loved it great design for a Tippmann first into Airsoft. Glock 17 tapped mags which I still have good fun even better if you fully convert the mag to self feed. Third WE GBBR M4 full HPA internal conversion. Bad bad bad, never again. A person makes them under Alyan Airsoft just crap save your money. Lastly for now, Polarstar Jack, love it. Nothing more needs to be said really. I would recommend anyone who wants to get into HPA in taking their time to pick which setup they want and which weapon ey are going to use. My SMP I rushed into it knowing nothing it was ok but was constantly tweeking it. Whereas my P* Jack I took a few months picking a donor weapon to buy. HPA is certainly not for short pockets (no offence to anyone) but it isn't. There's a number of us on this forum with experience which we can all help anyone with any questions.

Going to try the M nub in another barrel setup i think buddy. i've resolved this. I've filed the hop window to make it a little wider and bought a new Prommy P. so far it's look good but need to bed the bucking in. I also need to make sure my Poppet Dwell is set right then i'll see )

What I’ve done is done out my loft slightly. Loft boards down and MDF board of one of the back walls with shelves and long nails to hold my RIF’s. The shelves hold mags, BBs, TRMR that kinda stuff. Angled nails to put my M4’s on and side arm. Clothing is in my wardrobe. I also have a small three tray storage unit for spares etc. All my kit I’d take on a game day is kept in a large holdall where it stays rather than unpacking and repacking. It’s either just me or pointless comments like this just annoy me. Someone’s asking a genuine question and you get this kinda stuff. If you don’t have a proper helpful answer then don’t answer at all I say.

First things I'd look at are 1. Air seal. Don't think it's a massive issue if your using an AEG. 2. If barrel is dirty 3. Bucking, check if it worn. 4. Check the adjuster is working and nub is being pushed down.

Would one of those work with a Pro-Win unit ? I’ve seen those before but everyone seems to put them into hops which use those bigger hop arms !

No I'd checked the barrel window first to make sure it was in the right place. It's defo the nub not being pushed down right. I've done something I really didn't want to do. I've glued the nub to the hop arm so make sure it's all seated right and trimmed the nub down ever so slightly, seemed ok now. Need to do some more testing but looks better. Thanks for the reply gents.

I’m using a prommy purple bucking. The only problem I have with making a mod to the flat nub is the roller bar inside it don’t want that to catch and it’s too small to try file it down.

Hi all, Wanted to ask some advice. So I’ve flat hopped a number of setups with no problems what so ever. But now I have an Orga I’ve done the process again but without shaving down the bucking. I’ve used the same Pro-win hop, same Namazu flat nub just a different barrel but for some odd reason when hop is applied it doesn’t come down flat it comes down at an angel. The left side comes down lower than the right which in turn is making my BBs curve to the left. I can only assume that for some odd reason the nub is catching the window. I was thinking of taking a dremel to the Pro-win hop window to make it slightly wider but wanted to see if other people have had this problem and if so what they did to fix it. Chris AKA Qlimax

BBs direct are pretty good. used them a few times without fault.

i use one of those vavles but it's from RAP4UK. i like it have used it for over a year with no problem what so ever. how ever i have seen people buy those cheap Chinese copies with bad results, one guys burst open whilst filling thankfully he had it strapped down otherwise the outcome could have been really bad.

HPA'd support weapon. That will be one mean mother when it's going.

It's a Defence not a license and no they can't. If one of them had UKARA themselves they could buy a RIF and gift it to you otherwise no.

yeah retailers will sell to a museum if you provide the relevant documents to show that's what they are being bought for. I know someone who did it but for re-enactment purposes and he just needed proof and I.D to verify his age.

Don't think customs will release it if you don't have UKARA mate.

It’s always good to have something a little different to everyone else. Grey and black Multicam would be different. I’ve posted this a few times along the way but everything is done. M4 painted and Pmags to match. I’m pretty happy with it.

Myself I prefer either a Blackhawk holster or a custom Kydex holster which I currently have. Tried an IMI was ok. Think it depends where your planning on wearing it and if your adding on a torch. Some people pick one type and it works for them others try a few before they get the one. Blackhawk IMI Warrior Glock holster Kydex Fobus