Qlimax

PDI 6.05mm Barrel + Prowin hop. Got this the other day and set it up today to have a mess about with it. Flat hopped and it seems to be spot on accuracy wise. Gotta love that engraving they put on the barrel.

Well they've finally replied to me and basically have made me out to be a liar. If I wanted to return because I'd changed my mind I'd just say it and I'd have the right to, I wouldn't need to make up a silly lie of its covered in grease and wouldn't load my mags. Also thy said they'd sent me a display model in error. Correct me if I'm wrong but if it's a display model then you've got to knowingly take it off display to send it ? So it's not an error. Very disappointed they've made me out to be one and they've also said that since I've opened a dispute they're going to leave it until PayPal decide on a refund or not. Want tossers they are.

Sorry thought id put the whole address in. Tried calling them several times with no reply, I've emailed them and tried Facebook all to which no response. Done all the necessary before making this review

yeah defo right mate, here's a hyper link http://www.justcauseairsoft.co.uk/

Used these for the first time last week. Hasnt heard of them before nor had any recommendations on them. My initial thoughts werent great. Processing time to dispatch was slow 4-5 days although my order was marked as completed the same day it was ordered. I received the item a few days ago and was even more disappointed. Upon opening the box I noticed a strong smell of grease a lot like Tech-T & anyone whos used Tech-T gunsav before will know the smell it gives off is very strong. I was surprised to find it had been greased up as my mates have purchased the SL14 speed loader from other suppliers and its not arrived with any grease on at all. I then noticed inside the magwell there were worn mark from where mags had been pushed in and pulled out. Strange as it was sold me to as new!!!! Anyway, I loaded it up with some BBs to test it and it couldnt get it to complete a full pump it would simply get stuck half way. Tried various mags and tried only filling the load chamber half full with the same results. I went to their website to find out how to return my order and completed an online form, I also backed that return request up with an email stating why I wanted to return it and the problems I found. Ive received no reply from them or confirmation that its ok to return my order. Ive had to open a PayPal dispute to try get this resolved and still now Ive not received any reply from them even though the item has been returned to them and theyve signed for it Ive still not received any reply. Overall Im very disappointed and wouldnt recommend these to anyone. My personal opinion is theyve sold me either someone elses return or a used SL14 speed loader with a brand new price tag attached. I wont even try to give them ratings out of 10 as currently they make JustBBguns look good ;o) pmsl. Definitely one to avoid.

wanted for ages, so why not

Ammo drop are good.

Same as PT I only run .30s now, from personal experience I’ve found running heavier BBs is better. Don’t know about range but accuracy seems to be more consistent which is all I’m looking for. Range to me isn’t a massive deal like it is to other people as long as I think it’s reasonable then it’s good. you can have all the range in the world but if the accuracy is shite then what's the point.

if you build your own and buy parts from places like Scan or Overclockers you get warranty on parts anyway. I've build 3 PC's in the last two months and all the important components have warranty.

Overclockers or Scan.co.uk building one is an option as well.

not necessarily. Before facebook sales pages where about the forum/s were brilliant and scammers were far and few between. I don't think it will have that much of an impact on the forums

I for one am glad Facebook are starting to ban sales on there, the way they’ve gone about it is shite like but glad none the less. I found on Facebook there’s far more scam artist on their than the forums. Although forums aren’t free of them I personally think there seems to be less.

I’ve upgraded my WE G17. It now has a Maple Leaf barrel with a monster hop rubber, WE competition trigger, Guarder enhanced recoil spring. Also changed the slide and outer barrel. It’s range now is ridiculous compared to what it was and the accuracy is ok nothing to rave about but damn better than it was. Before AFTER

i've done finished a Mancraft setup in my VSR10 Gspec. Absolutely brilliant. Can't fault it.

yeah they came in stock earlier today from what i saw.

i've not used EPM mags before but if i compare these to my PTS M version Pmags then i'd have to say they are miles better

That’s very true the bottom does come off really easy doesn’t it. I expected that the orange hex marker under the base plate would be a pain to get off but it just clicks right out.

they're available in tan as well aren't they but always seem to be out of stock. I certainly did purchased some red followers for them but kinda wishing i'd bought another colour as red is a popular follower colour replacement

JD Airsoft i believe is the place to get those from. I hope so. i really do like them, after seeing my mates i had to buy some for myself and i'm certainly not disappointed

Got these Hexmags from LWA. tested 3 in my P* to see how they perform, i have to say i'm really impressed they pushed .3s out with absolutely no issues at all and with their follower design it fed every single BB. Slightly disappointed by how LWA packed them for sending they could have been easily damaged.

That looks like Hydro dipping ?

Shock and Awe Airsoft have a team they're just starting ST6. They're based in Abergele just up the A55. Great site, site staff and a decent bunch of people. I've played there for 3+ years. Not yet a part of the team as i have personal commitments but i intend on joining. Here's some links for you if it's of interest. http://www.shockandaweairsoft.co.uk/ https://www.facebook.com/Shock-And-Awe-Airsoft-263444533735466/?fref=ts I'd say go a long to one of their game days, meet the owners and marshalls. Phil Smith is your man to speak to about the team stuff.

There's not really anything to put to rest dude. You moaning at people for using moulded buckings. I'm simply saying I've already tried the blue one regardless of what it's made of and it was shit. I fail to see where your trying to go with this. People will use what they use. My mates have flat hopped setups and theyve tried the prommy purple didn't rate it. Theyve tried the blue didn't rate it. The G&G green didn't rate it. They use thr Maple leaf bucking which they say works great.

Yeah Danny can have a look, I'm not sure how much he knows about HPA installations etc but worth sending it. Mines a 303mm barrel and my dwell is 60 if I have it any less the consistency simply isn't there.

Well pretty much ever bucking is moulded so you have to. The blue bucking you've mentioned is shit I've got one and it was bad. I've had far better results with the Prommy Purple. People will use what works for them.