Qlimax

I’m using a Prommy purple bucking and Namazu firefly flat nub in an orga barrel as well. I found I was having the exact same issue with mine for weeks on end. I’ve ended up having to have my Dwell set a lot higher than it would need to be to get better consistency shot to shot. I’ve also had to apply some Teflon tape to the bucking near the C clip. It’s funny because before I did that I used the exact same barrel setup in my G&P Sentry AEG and it worked an absolute charm but once it went back into my P* it was bad although the alignment was perfect. It now shoot pretty much spot on shot to shot but I had to run 3500-4000 BBs through it on full auto which was my absolute last resort because I’d finally had enough. I can’t remember who’s said this but I know on the Facebook P* page someone said that with the Jack when it’s first installed shot to shot accuracy is shocking but then the nozzle beds in and it comes good……. how true that actually is I don’t know. The Prommy purple setup is the go to setup for Amped Airsoft isn’t but I’m not entirely convinced on it yet.

he's a proper dirty player. The we had the incident at have a bang rule in place because it's a CQB site yet he shot my mate four times point blank in the face with a Tippmann and didn't even have the decency to apologise he just laughed. Proper dick head him is.

Matt the musket is the biggest cheater of them all and a proper dirty player. Myself and a few mates had the misfortune of playing at a site the same day that guy did. Disgusting player, not mentioned the site but he got a month ban for his game play that day. he's also posted a frag video which shows him killing like 15 people with it which is absolute BS. his frag killed two people the rest had been shot on the right flank. If no one else has seen this it's worth a watch and a listen to. This was sent to me after the incident mentioned about.

Haha have to agree wit that, when you see people's side arm flapping. A few guys I used to play with always had at issue. Acts why I only use either a BH platform / holster or Kydex holster. Switched recently to a WAS UPH on my battle belt, quality little holster.

For you it would be JD Airsoft in Cannock I'd say. Unit 5, Virage Park, Green Ln, Cannock WS11 0NH

BombUp Airsoft in Runcorn fella.

Finally got a Short Dot scope. Have painted to match and made it a DMR. Won’t be everyone’s taste but I’m happy.

61 plate White Mitsubishi ASX 2 and a 09 plate Seat Leon sport.

Finally managed to get my hands on a WAS UPH. a little change round with my vest and look smart. Bought those elastic mag pouches a few weeks back as well.

HAHA typical usual Funny you always like to pick at what other people say. Rather than actually posting something helpful you just pick like it's big & clever. Thanks for the giggle.

I’ve just built my own. Cost me roughly £550-£600 and it’s all good stuff. Problem with buying a pre-built “Gaming PC” is they aren’t actually gaming spec, well not the cheap ones anyway. You could get lets say a £400 gaming PC but the PSU won’t be to gaming spec, the RAM certainly won’t be to gaming spec, CPU Fan will be a standard cooler and not a proper Arctic cooler which it would need. The GPU will be just about gaming spec but nothing to rave about and the motherboards in those kind of PC’s are generally Gigabyte boards which are just shite.

You can get a Wolverine Inferno with a Ninja LRP and a 48/3000 tank for £370 from Beesting. that's the cheapest, the inferno is the cheapest of the lot and the LRP is the cheaper option of the regulators. then you need to fill your game tank/s so that's more expense as you'll need to buy other bits.

Sorry my bad thought the link had copied over. Anyway it's going round FB this morning. Personally think it's all BS, banning them won't change a single thing.

Seen this on Facebook and thought I’d share this to the community. In a bid to stop terrorism the EU are looking at banning and restricting all replica firearms, blank firers and decommissioned firearms. Quite clearly that won't stop terrorism at all. Please visit the link below, read the proposal and leave sensible and useful feedback on it explaining why this won't work. Numbers matter so make sure you leave feedback, and share this where you can. European Commission - Register of Commission documents European Commission - Register of Commission documents EC.EUROPA.EU

I have dude, they are good. Warrior from UKAZ forum is the owner of it.

if you get your Dwell setup right and don't have full auto going all day long you'd get all day from a tank. I use a 62ci 3000 pro tank which lasts me all day as i never come out of single shot but i also take my scuba cylinder just in case. alignment is an easy fix if it's not lined up properly.

really easy you can either buy a working second hand one and strip it out or buy it new. I bought new myself purely so i knew everything was right. Best are G&G, G&P or VFC in my opinion. Avoid things like JG. i would also recommend avoiding anything that has a blowback system is only because i built my SMP into an EBB G&G and was a complete ballache with alignment. try get something that has a standard gearbox. what ever you go for i would do full testing with it as an AEG to see how the range is and accuracy then you'll notice any differences when you change out. alignment is key with these things.

The Jack with a reg and bottle your probably looking at no more than £450 if not less mate. EDITED just looked. £395 if you have a redline reg and £385 if you a an LRP

Depends on what system you want buddy. If you have a donor weapon then a lot of the cost has gone. You have the follow PolarSta Jack Wolverine SMP or Hydra or Inferno. The Jack and Inferno are the cheaper ones. But then you'll need a regulator and bottle. Ninja LRP is the cheaper reg and is a better one in my opinion there's also the Redline reg which is more but the LRP is classed to some as the Redline upgrade. I recommend you visit Beesting Airsoft website. They sell packages. So you can pick your system with reg and bottle. Highly recommend them Danny will sort all your needs out. If you need any further help please feel ffre to pm me.

There's been another thread where we've asked for a sub forum to be added for HPA users. HPA wise I've had a few different types now some good some just shocking. Wolverine SMP was first it was ok but nothing special. Tippmann M4 second loved it great design for a Tippmann first into Airsoft. Glock 17 tapped mags which I still have good fun even better if you fully convert the mag to self feed. Third WE GBBR M4 full HPA internal conversion. Bad bad bad, never again. A person makes them under Alyan Airsoft just crap save your money. Lastly for now, Polarstar Jack, love it. Nothing more needs to be said really. I would recommend anyone who wants to get into HPA in taking their time to pick which setup they want and which weapon ey are going to use. My SMP I rushed into it knowing nothing it was ok but was constantly tweeking it. Whereas my P* Jack I took a few months picking a donor weapon to buy. HPA is certainly not for short pockets (no offence to anyone) but it isn't. There's a number of us on this forum with experience which we can all help anyone with any questions.

Going to try the M nub in another barrel setup i think buddy. i've resolved this. I've filed the hop window to make it a little wider and bought a new Prommy P. so far it's look good but need to bed the bucking in. I also need to make sure my Poppet Dwell is set right then i'll see )

What I’ve done is done out my loft slightly. Loft boards down and MDF board of one of the back walls with shelves and long nails to hold my RIF’s. The shelves hold mags, BBs, TRMR that kinda stuff. Angled nails to put my M4’s on and side arm. Clothing is in my wardrobe. I also have a small three tray storage unit for spares etc. All my kit I’d take on a game day is kept in a large holdall where it stays rather than unpacking and repacking. It’s either just me or pointless comments like this just annoy me. Someone’s asking a genuine question and you get this kinda stuff. If you don’t have a proper helpful answer then don’t answer at all I say.

First things I'd look at are 1. Air seal. Don't think it's a massive issue if your using an AEG. 2. If barrel is dirty 3. Bucking, check if it worn. 4. Check the adjuster is working and nub is being pushed down.

Would one of those work with a Pro-Win unit ? I’ve seen those before but everyone seems to put them into hops which use those bigger hop arms !

No I'd checked the barrel window first to make sure it was in the right place. It's defo the nub not being pushed down right. I've done something I really didn't want to do. I've glued the nub to the hop arm so make sure it's all seated right and trimmed the nub down ever so slightly, seemed ok now. Need to do some more testing but looks better. Thanks for the reply gents.