
JimFromHorsham
Members-
Posts
918 -
Joined
-
Last visited
-
Days Won
23 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by JimFromHorsham
-
G19 looks good Ooh yeah looks nice Oh …. Am I shooting underwater in an Olympic pool ? the perils of knock off optics , that special lens “coating” is always a passion killer 😛 still , it looks the part on my shelf
-
Krylon , alcohol wipes , masking tape the bits you don’t want painted and just get creative , it’s hard wearing , easily removed (only elbow grease required ) and easy to spray over & touch up if required.
-
I’ve done a lot of pistol builds over the years , many moons ago it was a real chore with lots and lots of fettling required , slide to frame fit being the biggest issue for a pistol that’s going to work at the end of it . Nightmares about a Prime / Tokyo Marui SIG226 kit still haunt me to this day My last few have been an absolute breeze to be totally honest , mostly guarder kits onto TM pistols , a couple of Glocks , a Beretta and a 226e2 . the production quality has certainly stepped up in my humble opinion so I’d be as bold to say just have a crack yourself , a decent fitting micro driver set , some good quality pin punches and a good clean workspace and just get on and try . Take photos as you go or video it and take your time
-
Tanaka Works Super Redhawk 9.5” , heavyweight
-
Tried the oring / silent fill option ?
-
no shipping option to UK at the mo 😭
-
The 'What have you just bought' Thread
JimFromHorsham replied to Cameron364's topic in Guns, Gear & Loadouts
as said , from a friend for a friend , it was a great price and a pleasure to see it go to someone who’d been looking for a good one for a long time . -
The 'What have you just bought' Thread
JimFromHorsham replied to Cameron364's topic in Guns, Gear & Loadouts
nice Vectors , I had the pleasure of this one as a very brief ownership , picked it up from a friend for a friend , had some nice Gucci bits fitted -
4x Guarder Magazine Extensions For Tokyo Marui Glock Mags
JimFromHorsham commented on BADGERF1ST's advert in Parts
-
-
This advert is COMPLETED!
- For sale
- Used
To be clear these are all sold as not functioning as they should , they all have faults which I will try to list as clearly as I can and they to be sold at this stage as a threesome . SOLD KWC CZ75 Co2 SOLD competition model , slide is very sluggish and open sticks open with a failure to complete a full cycle , original magazine feed lips were broken and an attempted repair which (no surprise ) failed again , a brand new magazine is included . no box but instruction booklet .SOLD KWA Glock 17 , almost like new but the BBU screw has stripped , i actually suspect this came from the factory like it , the pistol does fire and hold gas but that screw needs tapping or JBwelding in place . No box but original screw is included so you could size up for the new one . SOLD Chinese .357 revolver SOLD , Co2 , 6 bb shells included , original booklet , tool kit , spare Co2 base cap and mini weaver rail , plus a strike systems holster . It functions but Very low power , possibly an easy fix but I have no time and too many other projects . SOLD if you need more info or pictures please ask , no offers at this stage thank you . ok , I’ve been asked about splits , first come first served , CZ75 - NOW SOLD . KWA Glock - £55 posted chinese .357 -NOW SOLD£55
- GB
-
Not random at all , if I recall correctly it’s a 360mm or 370mm crazyjet fitted in that one , I’d have to dig the packaging out though to confirm .
-
both WE GBB
-
we’ll all I can say is that the barrel you have is incorrect for the rifle you want to fit it too and will not work properly (as you have found out ) .
-
The function of it is to fit to a completely different rifle , so just return the one you have and buy the correct one
-
PSG1 is an AEG 🙃
-
-
The image you’ve used is from an eBay listing that clearly says it’s a Version2 TB for a TM PSG1 , so I’ll go with that .
-
This advert is COMPLETED!
- For sale
- Used
Here I have two Umarex G36 gas blow back variants , a 36c and a 36kv . both are in cosmetically good but handled condition , neither have actually been “skirmished” but used more for display and handling from a much bigger collection . the 36C is fully working but may benefit from a full service and clean down , I tested this morning and a full mag went through without any issues . the 36KV is sold as non working , it needs a new nozzle and nozzle stopper (I think this is the correct term ) , according to Umarex these are parts “27” and parts “24” , 27 I believe is available but part 24 has eluded me . However you can of course just swap the working BCG around if you fancy a change of rifle . so to be clear , the 36C is working but may benefit from a full strip and clean etc as it’s lived most of its life on a wall , and the 36KV is non working. there are two magazines included , one is holding gas and the other is leaking , I’d asked a friend to take a look and he tried a repair but it hasn’t held, so again magazine 2 is sold as non working either for repair or spares. the KV is currently fitted with the magnified carry handle option but a spare Picatinny low rail is also included. instruction booklets for both plus a parts list print out is included but no original boxes, however both rifles will be packed and shipped securely. I’ve tried to be as concise and open as possible to both rifles but if you have any questions then just ask . im asking £250 all in posted via PF48 for both rifles and accessories seen . no splits and no offers at this stage please . regards jim.£250
-
This advert is COMPLETED!
- For sale
- Used
Tokyo Marui S&W M&P9 / FDE - totally stock TM pistol with 2 extra TM mags , skirmished condition with a few scuffs and holster rub to the slide , I’ve tried to picture this but if you need more just ask . All mags are leak free and the pistol is functioning as it should , might make a good base for a custom build . £100 all in which includes signed for postage and PayPal fees.£100
- GB
-
I can not find any reference to being a G&P lower specific part (but things change and sometimes retailers forget to update the listing description ) . the best thing to do is contact who you will be buying from in advance , if that’s firesupport then Frank should be able to give you all the information you need for fitting and if there is anything else you need that isn’t included in the kits .
-
This buffer kit for an a2 style solid stock / long tube https://www.fire-support.co.uk/product/gp-marui-gbb-mws-aluminum-a2-buffer this tube for a PRS style stock or A2 solid https://www.fire-support.co.uk/product/gp-gbb-roller-bolt-with-marui-mws-buffer-tube-long-version this one for UBR style stock https://www.fire-support.co.uk/product/gp-gbb-roller-bolt-with-marui-mws-buffer-tube-short-version this is a standard 6 pos stock tube https://www.fire-support.co.uk/product/gp-gbb-roller-bolt-with-marui-mws-gbb-5-position-buffer-tube-set
-
Pretty sure the long one you’ve linked for fitting into a Magpul UBR style stock , The short one is just a standard buffer tube set up.