Jump to content
Updated Classifieds rule 5 - Adverts must include your username and date in photos

Misery

Members
 View Profile  See their activity

  • Posts

    282

  • Joined

  • Last visited

  • Days Won

    3

  • Feedback

    100%

 Content Type 

Everything posted by Misery

  1. Misery
    well bought myself a imax charger and.....its fake but kinda knew it was from the price decided to give it a punt anyway and next tro a genuine imax the thing is working identical near hr to charge batt at same settings same dishcarge same blance times checked to make sure the blaance shown was same on each batt between the two chargers *dont have a lipo checker to hand only way i could check to make sure balances were correct* only thing ive noticed is charging a nihm on the fake gets a tiny bit hotter but niot by much nothing to worry about in my opinion all in all 15 on a fake imax is not to bad even thought he original isnt much more lol to have as a back up or even in the car its not to bad
  2. Misery

    seeing alot more people mentioning swiss cheese pistons what is the point in them other than trying to weight save on a non heavy part imo and are they worth it not going to get one as already got a new one from ak2m4 justw ant to know what the fascination with em is lol

    1. Show previous comments  19 more
    2. Misery

      Misery

      haha all this talk of gu10 converters as got me spinning i hate electrics lol!!!

    3. Sitting Duck

      Sitting Duck

      so do I now after all this lighting crap

    4. Misery

      Misery

      haha am not surprised lol

       

  3. Misery

    Low FPS

    Misery replied to Misery's topic in Gas Guns

    Ok so from day one ive always had the issue of it pissing a bit more gas out than it should on the blow back in my opinion. and then found out it not being able to shoot a full 30rounds out a mag i was putting down to just temps etc couldnt sleep so decided to tear it down clean relube checked the rocket valve spring and low and behold the spring was weak as s**t when i tested before i musta tested the new nozzle twice and not the old one haha slapped the new nozzle and rocket valve in and holy crap she is alot more snapier and hardly any gas expelled!
  4. Misery

    quick battery question before i dig out my inteli charger from the loft after not using one for 8 years lipo inteli charger settings went out my head but

    lipos 4.2v per cell fully charged

    if memory serves me right for 1c charge its basicly the mah of the battery so a 1100 mah batt for a 1c charge would be 1.1a?

    1. Adolf Hamster

      Adolf Hamster

      yep right on both counts.

    2. Misery

      Misery

      braw just wanted to make sure before i break out the inteli quite surprised the cheap basic asg lipo has kept the 11.1's in balance would of thought it wouldnt of been that great and would of seena  bit of varience in the cells

      had to resurect one of my newish 7.4's would plug in and register as a 3s instead of 2s quick 2 second nihm blast then onot a blance charge has seemed to sorted that one put a few cyclesthrough it and seems to be ok will find out through proper use soon i hope haha

  5. Misery
    haha nah tbh i only payed about £20 and knew was gonna break quick from the outset well that was in my head anyway,so set myself of upgrade/replacement parts to the price of what the gun is new and have pretty much stuck to that there isnt anti reversal latch and spring trigger and spring,main spring and guide but depending on how much the compression being sorted effects fps will see wether i change out the main spring lol
  6. Misery
    have to say love my 2 cyma's the cm516 as plsaticy as it is shoots well ive put the slightly better motor from my 621 in it and a reshim and she performs pretty decent will be fitting a spare perun mosfet to it as why not its not costing anything bar time the cm621 i havent had much of a chance to fire it in stock config but when i did again shot really nice was a little noisy but just needed reshimmed would of loved to have had this from new so i could see how it performs compared to when i got it 2nd hand,just waiitng on a next gen v2 perun mosfet to arrive to install with the 13-1 gears high torque motor and upgraded compression kit from ak2m4 516 on left 621 on right before i painted it and now
  7. Misery

    wooohoo received a lucky pew golden ticket :D maybe my luck is changing haha

    1. Show previous comments  18 more
    2. Shamal

      Shamal

      Haha. Let ya off. Get your head down.

      😴

      Regards 

    3. Misery

      Misery

      haha would but to early for me id be up in 3 hrs lol

    4. Shamal

      Shamal

      I'm off up the wooden hill soon. And thats difficult cause I live in a bungalow!🤭

      5am start tomorrow.

      @ak2m4 I would be interested in your cunning plan👍

      Regards 

       

  8. Misery
    totally man had same issue with motorbike mechanics snap ill only be sending to a tech as a last ditch effort
  9. Misery
    if that was the part that had caused the issue they may not have mentioned it though
  10. Misery
    cyma cm621 mosfet great gun 150 new have seen em put up for 120 new ocasionaly
  11. Misery
    yup wd40 isnt gd for it either
  12. Misery
    149 micron mesh strainer https://www.ebay.co.uk/itm/401618782376?var=671363138447&chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=671363138447_401618782376&targetid=1140163972729&device=c&mktype=pla&googleloc=1007321&poi=&campaignid=12126090633&mkgroupid=117623829555&rlsatarget=aud-381667280803:pla-1140163972729&abcId=9300481&merchantid=9460704&gclid=Cj0KCQiAyoeCBhCTARIsAOfpKxjLFMm1Fu3QW8YAkcP0OTnRUSw12165zxHrVeCFzljECWwQ22eh8psaAmNIEALw_wcB
  13. Misery
    most decent acrylic airbrush colours be fine from vallejo games workshop army colour
  14. Misery
    ahhh cheers for heads up been a few years since i used it!
  15. Misery
    luckily this one is the exact same measurments as the cyma one rechecked with calipers calibrated this time when it arrived yesterday so should have no issues emphasise on the should with how haunted that gun is you never know lol
  16. Misery
    no wobble not to tight it fit pretty much bang on like the original 21.5 for the cyma blue ones and this is bang on 21.5 so perfect length aswell yeah man id measured then messaged ak about it before i ordered asked about a longer nozzle and he swapped it for the blue one that he sent which is this one https://www.ak2m4.co.uk/internal-parts/nozzles/aols-m4-aluminium-nozzle-double-oring
  17. Misery
    scratch that its bang on same length as the cyma blue one i hadnt zero'd the calipers before i took measurment last time!
  18. Misery
    compression kit from ak2m4 has arrived now to wait on the perun mosfets to arrive @Sitting Duck spoke with mr ak2m4 and hes sorted me out with a nozzle as close to the cyma length one as he had and it fits perfect in the tappet plate
  19. Misery
    my haunted cyma cm621 lol
  20. Misery
    you dont have to tell me that twice lol
  21. Misery
    yeah bud as i have to do the same with my perun mosfet
  22. Misery
    haha mate i ordered brake pads for my wee 125 had to order em from itally july last year eventualy received them november had to take my bike off the road till i got em so know your pain brother lol
  23. Misery
  24. Misery
    haha know feeling im looking at a 2 week minimum from poland going by the tracking on my stuff from perun lol
  25. Misery
    looks to me the trigger is slightly out of line the back of the trigger block is slightly angled could just be my eyesit
×
×
  • Create New...