AlphaBear

ASG Devil Blasters are fine as a few folks on here have said. To be honest they ain’t my first choice for an MWS but as you’re just using them to chrono the rif they will suffice. The devil blasters are the more higher end of BB of the blaster range.

I don't have any third party mags so can't comment I'm afraid.... With regards to the Marui XL it loads 4 bb's at a time so I usually do about 6 pumps and then struggle with the last couple. Having said that the more you use the mags the easier the spring will become to load bbs, so I've heard, but that's not worked for me yet... I've no idea what the longevity of the Marui XL is like but it's all plastic so I expect the MWS springs will destroy it at some-point sooner rather than later...

Anything Nuprol is #bleep# The Marui XL speed loader... you simply can't beat it for the MWS mags!

You know you've just answered your own question right? ? But yes, I'd do the same... just make sure when you reseat it the rubber is in the correct position. Make sure when you slap both halves of the hop chamber together you don't bulge/buckle/sag/push or whatever the right word is to the rubber... but you know what I mean..

Well serves you right for reading this thread lol What are your plans for the CQBR? The strange results with the TM nozzle are more than likely down to the wear on the front end of the nozzle... I would expect each shot to drop by an FPS or 2 simply due to the reduction in the volume of gas and hence less pressure in the mag. The erratic behaviour implies there is as compression issue that's for sure.... Also make sure the sealing buffer (the rubber washer) is properly lubed up each time you take the bolt apart...

Good choice....! Ahhhh the FS buy one get two mags deal thing How long before you stick a Mk18 rail on it? If you do, you'll need a PTS barrel adapter and a few shims.....

Stand them up vertically and see if the new DP nozzle protrudes a tad more. To me it seems the head of the nozzle seems a tad longer than the Marui one. But it may well be the way the pic is taken.

For nozzle springs just get the ones Eagle6 make. Trying to get the Marui ones will not be easy. You just need to keep an eye out on the Japanese and HK airsoft sites as they tend to have the MWS parts in more frequently. Mind you nozzles and springs don’t hang around long so it’s the luck of the draw or a stock alert email. PTS adapter - I use one but still had to use shims to achieve a tight fit. I added a couple to get my MK18 rail to fit snug.

Don't get me ranting on about cheap BB's.... I won't go on about it..... Promise... Scout's Honour... Honest! Bloody Nuprol RZR shite BB's! This is my order... 1. G&G's - The only downside about G&G is that you can't get the heavier ammo grade in the UK... I'm not sure why but you just can't. 2. Geoff's - (Super Precision variant. Geoff's do both Super Precision and Precision https://www.outdoorandtactical.co.uk/product/geoffs-super-precision-bbs-0-32g-3000-white 3. Longbow 4. BLS 5. ASG Devil Blasters

Best to call them to be honest. Also give FS a ring to see when their next stock update is. They had new stock a 2 to 3 weeks back and it all flew out.

I’m a tad more conservative. Mine shoots 199.9m and is like the Death Star laser. #justsayinginnit

60m kills is pretty incredible for 330'ish fps... Which gas were you using? At 330fps it's certainly not green gas right? I've not scientifically measured mine yet but will have a go the next time I play...

Not bad at all.... it's a rather good video review and shows us how good the MWS ZNET system is out of the box!

I couldn't think of a word to describe that bipod..... but yeah jank suits it

Now, now, what do we have here? Hmmmmm the upper 416C looking variant looks ok.... but the lower one looks as though it's been in a drag contest. What's it supposed to be?

That’s fine. That will work. In fact I have one in my parts box. . That GBB purple prommy is supposed to work very well with the prommy hop arm too. I have one of those too in the parts box but never got round to trying it. https://www.fire-support.co.uk/product/first-factory-strike-hop-arm-for-marui-m4a1-mws

Only a GBB rubber will fit.

I’m using the same batteries in my 50 shades of Tan. The gun starts firing as soon as you look at it. ?.

I’d stick to the Marui rubber truth be told. I used the tan modify one and it lasted a few hundred rounds. It may well have been the rubber was a dodgy one, who knows. The Marui is spot on. Always keep a few in the tool box from now.

Exactly. You’d think a 285 FPS 0.3 bb would them churn out the equivalent 0.20 bb at 350fps but my tests clearly showed that was not happening. With an AEG definitely the relationship would be almost linear as you said in your post. GBBRs are not an exact science. They are just fun to use. Here is a thought. It could well be the quality of the 0.2bbs they were Excels and pretty old too. Dare I say it about 6-7 yrs old maybe more. I do have some newer 0.2s so I’ll give them a go at the weekend and see what transpires.

Guys, I did some FPS testing way back in January using a G&P BCG and a Marui BCG. For those who want to know what power you get from using Abbey Ultra Predator gas (the one that comes in a red can) see the attached pic. I did some testing using 0.3 Geoffs and 0.2 Excels at a temperature of 20c (I do believe). The left side shows a G&P bolt carrier group. On the right is the standard Marui bolt. The max figure for the G&P bolt was 387fps!! With the Marui bolt it was 329fps on 0.2s. Interesting results eh? The mag was filled up each time fresh of course which explains the initial high power. The main reason for the G&P bolt having a higher output is the floating valve in the nozzle. Obviously it's set to allow more gas to get pumped into the valve. Yes I can remedy this with a G&P NPAS which I do have but just haven't got round to installing it.... I will do at some point and then report back... (but don't hold me to that lol)

Well that would be a daft thing if ever there was one ?. 0.48’s? Damn that’s expensive plastic! I run 0.4s in the 417 and I cry each time I miss.

I may have jinxed this, but my Angry Gun variable nozzle seems to work fine once it was set up properly.. How long the nozzle valve stays in one piece and doesn't get ejected out the front barrel is another story

Ahhhhh Jedi logic Actually the Marui Devgru is a bloody good looking gun and that can’t be denied. Amen.

I wonder if the whole design thing was something to do with the official Daniel Defense licensing? Let’s face it the design is just bonkers as surely TM knows us boys like to tinker with our pew pews. It’s not logical. Anyway, it's an old story so "Move Along Nothing to See" to coin an expression ??‍♂️