SSPKali

There is a pretty regular core of players at UCAP Gloucester prison. I don’t know of any milsim teams as I have always just rocked up and joined a friendly bunch for the duration of the event. I am in a team but the rest are such slackers we haven’t had a game together since March 😂

ASG Ultrair, CrazyJet 250mm barrel, Laylax hop arm and 60deg ML rubber - possibly the MR one? I tested a lot of ammo from a 10m clamped rifle with Warhead & Geoffs 0.32g giving the tightest groupings by a fair margin. The 0.28g are best performers in my M733 AEG, but the MWS just gives them too much spin! I have a Manometer (0-300psi) and some brass fittings saved in my Amazon basket because I have an idea for a airsoft gas pressure tester 🤓

Looking good! Nothing wrong with a URG-I 😁 I tried to run my MWS on 0.28g today but even with the hop “off” they were skying at 30m! Purchased a bottle of Vorsk 0.32g (not my first choice but was a small bottle for £10) and with 4 clicks of hop I was hitting peeking heads at 45m+ 😁

Love a good spreadsheet 😁

Damn it! Their 7.4v skinny packs would have been great for the M733. Now have some LiFe 9.9v that JUST fit in the hand guard with some jiggling and swearing 🤬

AEGs have a set volume of air in the cylinder they will force down the barrel. Gas guns (and I think HPA too. I don’t own one so no first hand experience) will keep pushing out gas to fill the volume behind the BB until it leaves the barrel and the pressure drops allowing the rocket valve to close and divert the pressure to cycle the action. TM gas rifles have 250mm barrels no matter the outer barrel length to limit Joule creep and keep within Japanese laws.

Videos are dead on that post ☹️ Got the Steel and Alu bolts set up with G&P stops and regular plastic valves. ~260fps and ~240fps respectively on 0.32g / ASG gas / 25DegC shed 😁 Taking less than half a mm off the back of a plastic valve gives a 20-30fps gain. Rub on some wet&dry on a flat surface….take it slow! G&P adjustable valve (green one) was showing some wear with the grub screw eating a hole in the brass stop - not all the way through but not ideal!

Built up a new nozzle tonight to replace the TM one with the broken screw and G&P NPAS that was adjusting its self (and trying to get me banned from the local site Luckily discovered testing at home!) Set up was the same for all gasses. Minimal Joule creep with 0.28 > 0.32g BBs (lighter ones omitted for clarity) 19DegC, 0.32g BBs from a Guns Modify nozzle / valve / valve spring. G&P adjustable valve stopper - three holes for the cross-nozzle screw to go through at different points so it moves the valve forward or back a set amount. MID setting: Nuprol White 265 - 272fps ASG Ultrair (beige bottle) 270 - 276fps So the low power gas is only ~5fps less. As it was close to the limit I changed it to the LOW setting and repeated. ASG Ultrair (beige bottle) 230 - 233fps Nuprol Red 235 - 240fps Bit too low (equivalent to 295fps on a 0.20g) but fine for CQB. So “Nuprol super power gas50000!!!!” only added ~6fps. iT wIlL kiLl Ur GuNz!!! 😂 Might try the mid setting with a cut down valve spring, or just wait for the weather to cool down 😁 According to Vorsk the V6 gas is equivalent to ASG Ultrair, V8 and V12 both higher pressure. Abbey 144a might be a handy one for warmer days when I don’t want to disassemble the nozzle in the safezone. What are others running and do they notice much difference in FPS?

Is it a polymer body? It might be the older type with “rear ears” that the rear body pin goes through. These you only need to remove the rear pin and carefully pivot the upper around the front pin. Search out the TM M733 AEG manual for instructions and pictures.

Yep, exactly that! I am going to fit new feedlips to #5 and test again. Only thing I think it can be!

Has anyone had worn feed lips on a mag cause bbs to roll out the barrel when they are chambered? Only seems to be one mag doing it! Manually charging the bolt is fine, but after it shoots and cycles the next BB just rolls out the barrel. Hop is on (4-5clicks) and hop rubber is pretty new (certainly less than 1500rds) BBs are Warhead. Happens with 110% and 130% buffer springs. Nozzle is in good condition and feeding fine otherwise. This wasn’t an issue with mag #7 and #2 used in the shots-per-gas-fill test I did a couple of days ago. Only mag #5 ☹️

I have tried Nuprol “white” gas (their low powered one, probably close to 144a) and only found a ~20fps drop (305 > 285ish) Tempted to get some bottles of the 6kg / 8kg / 12kg gas - can’t remember the brand but having named steps might make it easier to guesstimate!

Geoffs 0.32g gave the best groupings in my testing with the MWS but since they have been so scarce I gave Warhead 0.32g a try - similar grouping (thumbnail sized at 10m) so I grabbed a kilo of them and I have been happy with them. Zero splits or misfeeds. The 0.28g are the favourite food for the TM M733 AEG and give better results than Longbow, Geoffs and Guarder.

I have run the stock TM barrel and a CrazyJet one. Both were 250mm but the CrazyJet pushed the fps up by 15fps give or take. Grouping at 10m clamped was slightly tighter with the CrazyJet but there wasn’t much in it. Accuracy is fine for most ranges you might encounter and torso shots out to 60m with good conditions are possible. Sniping peeking elbows and knees at 20-30m is also fun 😈 If you are going to run a 370mm you will defiantly need an NPAS of some kind.

I have had the chance to try out the Angry Gun 110% and 130% buffer springs for the MWS. I am running a stock TM bolt with Hao steel bolt end and AG alu buffer for reference. The 110% worked the same as a stock / the G&P it replaced. Will keep this one for winter or use with the DP lightweight bolt. The stronger one certainly speeds up the bolt return and rate of fire. Not had a chance to check shots-per-gas-fill but will probably be a little less than the ~120 I was getting before but if you are running this sort of bolt/buffer it isn’t about maximum efficiency 😂 UPDATE: I have since run a shot test and in 25degC heat, 0.28g and ASG Ultrair. I got 65 shots from 12g gas in a v3 TM mag (no mods) So just shy of 2 mags worth. The v2 mag with trimmed fill tube gave 105 shots from 26g gas and dropped from 290fps down to 272fps over the course of 3 mags (one shot every second, holding the mag to maintain temp)

Also switch out the Cyma nozzle as they are usually leaky as hell 😂 AK2M4 should have a suitable o-ring nozzle (measure up the length with calipers to be sure!) and replace while the gearbox is open.

I have a BFG holder from them and it is a nice bit of kit and order was sorted and posted with no problems. Not tried their mag pouches so can’t speak to them specifically.

10mm ID X 1mm thick for big one on the brass part. 4mm ID x 1.5mm thick for the front one. You’re welcome 🙏

Hi, I am trying to sort a leaking output valve on a friends Webley CO2 pistol (might be a Well?) and despite greasing the orings and threads and doing the valve up tight it is still leaking when a bulb is fitted. Are o-rings for CO2 different to green gas use? Possibly due to higher pressure and lower temperature. Any ideas on sizes, if anyone has done this before?

While FREC guidelines are just compressions, but a BVM or O2 (15L/m) are helpful 🤙🏻 While the BeeGees “Stayin’ alive” is the right rhythm so is Queen’s “Another one bites the dust” - just sing it in your head 😂

So I broke out the spray paint and started blasting… TM M733 also painted but didn’t take a photo of that one.

Nah, wife likes it too as I was a bike mechanic when we first met so it reminds her of when I was slim and handsome 😂

I was told when training to FREC3 that as long as you didn’t go beyond your training (start trying open heart surgery in the safe zone) you would be safe. Basic life saving training is great as is noting down time of incident, what the incident was (fell from X meters / hit by car approx 20mph / fat sod tried running for the flag 😂), last intake (food/drink) and output, take the pulse every 5mins and note down with time. Plus any medical history, medication, etc. When the grown ups arrive tell them you have info to hand over and go through the details. Can save a lot of time and prevent duplication. Training over gear most of the time…or you end up with a pack like this (everything except an AED!) GoRuck GR1 plus admin pocket and side pockets!

Yes, a small one in an LBX pouch. I have even sewn the top bellows part closed on the pouch to stop it flopping about - this would all fit in a combat trouser pocket easy. Plasters Compeed Paracetamol x4 Nurofen x4 Asprin x1 Immodium x4 Saline wash pods x2 4” burn dressing Eye dressing x2 Z-fold gauze Tweezers Tick Key Gloves 4” Israeli bandage, outer removed (still in inner vacpac - can use for chest seal) External: Shears Roll of electrical tape Enough to treat the main ailments - hangover, dodgy footware and under cooked burgers 🤢 Burnshield dressing for pyro users not good at the counting… Gauze can be used to pack serious wounds, at junctions and on limbs - much more useful than a TQ. You just need to poke it in with a finger 😳 One plea from me: get some basic training (FA at Work, StJohns, Red ross) and DON’T BUY FAKE TORNIQUETS FROM EBAY!!!! 😂