strykerles

The last time I chronoed it the FPS was around 300 on a .20 using green gas I think @Secret

Cyma/EMG SGR 12 First impressions aren't good, motor is weak as piss but it does look good 😆

Not quite, needs to be ccw both sides

Got myself a PBS-1 suppressor for my ak and I'd like to mount a tracer unit inside. Now here's my problem, for the tracer I have (xcortech mk2) it comes with 11mm male and 14mm female threads. Does anyone know where I can get a 14mm male adapter?? Like a double 14mm, or 14mm male to 11mm female adapter to screw them together? Thanks

based on that picture the wires couldn't be run inside the buffer tube?

I think I need a minute and some tissues....

Might be an AA but not a bad deal https://jdairsoft.net/deals/santas-sack-day-1

might do just until you can source a replacement? I have a spare SVD body but it wouldn't work

After a weekend of cleaning and servicing I thought I'd take a picture. Some would say I have a problem. (Forgive the random m4, it was a spare parts build) 😁

As heretical as it may be, would this fit?? https://www.amazon.co.uk/Airsoft-Accessories-Dragunov-Receiver-Tactical/dp/B07SRM4B4M just until you can source a replacement reciever

Was perfect macks fodder that 😂

I have a steel bodied dboys and it's pretty good. Trigger had a long pull from stock but ran pretty well on a 7.4 with a decent rof Patrolbase has a few different cyma aks in stock but the cheaper ones are of the "tactical" variety

For a small pistol I tend to use a WE P99, change the hop rubber and its pretty good for indoor action although can be outranged outdoors quite easily. That's where my marui 5-7 takes over 😁

Just changing the motor out will increase your trigger response and ROF It should work fine but for how long is another question, the M90 series is quite popular on here so there will be others that can give you more information. One I know of is @RostokMcSpoons he sleeps with his he loves it that much 😜

May I ask how you fared with the piston?

maybe invest in an ottoman bed so stuff caan be stored inside, more for gear than rifles though?

I have the shorter version of the same rifle and if this is classed as "fully" upgraded, mine is "over" fully upgraded Got mine for £250 on offer from LWA, after putting another roughly £200 in I still wouldn't ask £450 for it. Maybe it's the extra length or to cover what DCA charged for it 😋

I don't think that will work as the cyma piston has offset teeth and one side of the rack is cut lower to allow the piston to pass the sector I had a similar idea with an SHS 19 tooth piston but to remove the needed material would mean that there wouldn't be enough left to hold the rack in place Afaik that particular piston will work in the CA SVD but not a cyma I spent a lot of time looking into replacements and all I found was getting a proper Cyma piston or a retro arms one No idea if a Real sword piston would fit but the cyma is a clone so it might do I hope someone else can chime in with more knowledge because it's something I'd like to know too 😁

Welcome down the rabbit hole 😁