Stevobeavo

Just to add I've got 3 DE guns and run them all on 11.1v, never had a problem. My 904G must be coming up to 2 years old now, abuse full auto now and again, never opened it up to service the gearbox (sounds a little noisy now so might have to), still has the same RPM and FPS/joule it had out the box. Also as it uses a V2 gearbox it will accept parts from your M4s

One of my DE rifles I bought from patrol base came with the test sheet TaiwanGun put in their orders. Also quite a few months back you could put in a request form to patrol base to order from TaiwanGun

I love my aap-01. Stock hammers lasting well at the moment but I have just upgraded it with Waldo custom bits so expect it to fail sooner. I used to have a TM hi capa 5.1 which was a very nice gun build wise but it never sat right in my hand throwing my aim off.

My little order from AK2M4 came through the post today (great service as always). New 240mm ZCI barrel paired with a gear parts omega nub and a old ML bucking. To finish off they are inside a new ZCI hop up unit. Reason I've upgraded the hop up unit in all my DE guys is for 2 reasons; The first is the arm has a different moulded end and the omega style nub doesn't fit in there properly. Secondly the standard DE hop adjust wheel only has half the adjustment range as the ZCI or similar design (I used a specna arms one for reference). Hopefully now it will lift and fire .30g as well and as far as my other DE guns.

Yeah I thought the same until I did a bit of research. Still love the gun even though I haven't used it that much though as not been to many games much recently. I'm going to upgrade my bucking and nub as it struggles to lift anything over .20g

decided to make my own gun case. It's not the neatest but it works. Bought a tool box from b&q, hardboard, pick and pluck foam and a few cans of plasti dip. I made it three layers with the bottom one glued to the base of the box. With the pistol layer I can pick the foam out for other attachments if needed and just plasti dip that section again to firm it up. All the layers also have foam under each piece of equipment.

Fitted some Waldo goodies yesterday. Should break my hammer in no time ? VID_20220806_143323.mp4

Waldo upgrades for my aap-01 turned up yesterday. My original order has been lost in the post so I contacted him and the same evening a replacement order was sent out to me, great service and great products. VID_20220806_143323.mp4

Driverwood near Crawley a while back.

Best - has to be my DE 904G, 10,000 plus rounds put through it, never opened the gearbox up. Never let me down and still shoots 1.07J on the stock spring. That's why I now have 3 DE guns. Worst - specna arms E07. Never worked properly. Chewed gears up, poor gearbox casing destroyed the o rings. And it feels like it built very cheap.

My local site is driverwood near Crawley. They run night games on Wednesday. When it gets dark early I think they are brilliant. They've spent a lot of money on lighting round the perimeter which changes colour, a audio system that pipes in effects and smoke machines. I run a very old Lenser LED torch rigged up to a pressure switch, it has a easy adjustable slide focus (common on torches these days) and will light up something 200m away.....over kill maybe but I've found a quick press and a burst of BBS and it acts like a tracer. I also get into cover and light a area up and team mates still hiding in the shadows can pick enemies off easily.

I'd also consider a double eagle M4 variety of some sort. I have 3 DE's ( 2 M4s and a sub machine gun) Great guns built well and seem very reliable so far. I have a specna edge 1.0 and it is awful and the metal body just feels cheap. But that's my opinion.

That's how I mount my torch. Can't say I've noticed any shadows in wide beam, but I mainly have the sliding focus halfway between flood and spot light

I have 3 double eagle guns, 2 90* variants and the new UTR45. Thet shoot well out the box, seem very reliable and well built. I have a specna arms e07 that's never worked and now in piece's But it's all personal choice.

Have you got a link for this. Can't seem to find it on there website

I did notice pheas Airsoft mention these mags do fit but I haven't seen one being test fired. Also I'm not a fan of how that looks. Taking mine out this Saturday for the first time. Looking forward to seeing how it performs

Such a shame you've had a duff one. I personally love mine. The feels of the gun is nothing compared to my TM 5.1 hi capa, but I find the AAP-01 has more range and is more accurate.

I cant see the movies either. The clones looks alright. I have no idea on sights as I just buy cheap eBay red dots. How much did they set you back?

Personally I see no issue with it (not that I could tell In the first place). Like what's been said might be people's only kit. But I would remove/tape up any Russian flags or symbols just out of respect at this present time.

Sorry I meant the g&g ones working with the M89A. I missed the pictures.

They are probably compatible with double eagles older m89A ump 45. https://www.patrolbase.co.uk/double-eagle-m89a-umg-submachine-gun-hi-cap-magazine Added some accessories to the gun. Red dot from my 904G. Suppressor is the factory one from the 904H hence why it's so long.

There is a picture floating about with a skeleton style stock but if it is released I've read it won't be until at least 6 months time. I personally really like the stock. It's wrong in a good way I think ?.

I prefer my aap-01 over my TM hi capa. Fits my hand nicer and imo it shoots better. The TM is beautifully made though. But Its all down to personal preference I think.

I believe hi caps will be available in the future. But I'm pretty sure no other mags will work in this gun. That's according to the description I've read on TG. But maybe one could be lightly modified to work. Well as I've already got 2 DE m4 plus a shitna arms edge M4 (that's never worked) I thought I'd try a different platform. I'm not too fussed about different mag types. Takes a minute to swap over pouches on a belt lol.

So I managed to put a few rounds through the gun at work today. It uses the same gearbox as all the other DE guns with the falcon system. At about 10/15m I was getting a grouping of around 2" or so (using valken .20g outside. I then shot at sign about 30/35m maybe which was about a foot square and after adjusting for wind I was hitting it pretty consistent. The gun feels very solid. No creeks anywhere. The only part that has a bit of movement is the stock when extended half way or more but even then it's not that much. I thought I'd highlight a few bits that might be useful and nice touches. First up is the battery compartment. It's pretty airy in there, especially if your a fellow 904G owner. as you can see plenty of room for larger sticks or crane batteries.b The stock has 6 extendable positions plus a couple for the cheek rest. It has a nice rubber pad at the end. A little detail that I thought was nice was a window to show what position the stock was in. The charging handle is ambidextrous and can be swapped over easily. You pull the charging handle back along 2 sprung loaded stainless steel tubes too access the hope unit. Hop now exposed through the large ejection window. This stays open until you press the catch and it snaps shut. Next is the grip. Feels good in the hand. Has a nice rubber texture on it. Definitely more comfortable than my 904G and H. Lastly one slight downside. The stock when folded doesn't click into anything to make it stay fully closed to the rifles body. There's a bit of free play before force is needed to fold it back to lock it out. Easily solved with a bit of velcro, or something. This is the amount 'free play' Hope that helps someone.