hunter511

Further down the line.... desired customer base. No point in running a site with planned out complex multi-objective games if 3/4 of your customers just want to play capture the flag and vice versa. I remember a few years back showing up to what was supposed to be a milsimesque skirmish at Longmoor (£50 game fee) to find that the company had had a brainfart and literally expected the clientele to be happy with "flag in the middle of the street needs to get to your base and not the opposing teams" type games. Suffice to say that pretty much everyone thought this was a waste of the sites possibilities and a damn shame given the games the operators in question normally ran. Game flow....... as an example nothing more tedious and game killy than someone sat on a choke point with a chest full of hicaps or a drum mag.

This can happen but in later versions there is a buffer in the lower reciever. I've not experienced it with mine. IIRC it was also linked with whether on not people were using the stock when firing.

Yup. I've had a visit from the old bill after buying a holster and a TLR1 torch from the states. Was kind of pathetic to be honest, they pitched up about 4 weeks after it'd been delivered. Knocked on the door asked if I had ordered the items and why, then just kinda wandered off.

@LEGXGPF Dropped you a PM dude

Super 6 to respond to my email....

That would be the "when you want a desert eagle look". Honestly tho I cant say I've ever seen that before. 3d printed maybe? Gunsmith Bros two two slideset probably the 7" version. IF you can find one in stock. https://www.redwolfairsoft.com/accessories-metal-receivers-slides-gbb-gunsmith-bros-aluminum-two-two-open-6-inch-for-tokyo-mauri-hi-capa-5-1-gbb-pistol-2-tones.html

Some people just need patting on the head, with a brick. This fairly obviously is one of them.

Hive mind assemble, After finally managing to remove the rail system and barrel from my mtr I'm considering a new, less janky looking front end. I have a BCM type outer barrel, looking at 13" and up handguards. Ive got a built up 9inch BCM set up for cqb, what I need/want is a decent setup for woodland that has decent inner barrel length (unlike the stock set up) and will provide relative consistency and accuracy. Ideally short dotted and capable of .28s. Suggestions for inner barrel accepted. Im hoping to use a stock marui rubber with super six g nub and at the moment I am deeply unimpressed with the modify tan rubbers. Both attempts Ive made to use them have failed hard. Also any suggestions for a longer preferably m-lok front end as the BCM ones seem to top out at 12" and I'm not a fan of marui's made up one?

I've always found McNett OpsDrops to be really good

Somehow only just noticed this thread...... Not a fan of the dead man's walk as discussed in here. IMO it's a slippery slope from this to "oh I'll just go use that respawn point behind the enemy lines" (yeah I have seen that). See also the concept of DBAD, the general guide I've always worked to is "does doing this make me a dick?". If so don't do it and therefore Don't Be A Dick.....

As a belated comment on this...... Badlands is a really good little site and I'm very fond of playing there. They are very good at controlling the day and the play. It's one of those little gems. I'm just hoping that the average level of play doesnt get dragged down by the influx of new players. (Don't get me wrong, I really liked CSW but I have witnessed some 'interesting' play there.)

Finally got the chance to run the full length stock MTR upper at UCAP green ops on sunday. On R144 and .25s colour me impressed. Had a really good day and made some very surprising shots considering the stock internal set up. Now to acquire a longer inner barrel and sort out a little more range and consistancy.....

Wow. Just got mine secondhand. Mags seem a bit of a weak point 4 of 6 mags DOA tho the previous owner says he serviced them before posting. That said a little bit of ptfe tape wrapped around the mag base under where the oring sits seems to have short term solved the problem. If it continues I guess I'll be looking at hylomar/liquid gasket..... Anyone got a link to a decent tear down vid in english? Need to get the barrel out as from a lokk through it its possibly never been cleaned. Plus going from the state of the barrel any recommendations on hop rubbers as I suspect that might be a write off as well.

Army Armament R501 available brand new for £80-90. Guys asking for offers and already turned down £65. Aaaand this kids is why we have Macks. A quick google might have told him that £120 wasn't a bargain price.........

In my experience angrygun kit is pretty solid. I've been lucky with my mtr and not had bad stock wobble. That said don't forget there are 2 real specs of ar15 stocktube.... commercial and milspec as well as "eh close enough" airsoft clone specs. https://www.fire-support.co.uk/product/angry-gun-mil-spec-cnc-6-position-buffer-tube-marui-mws-version

Angry gun do a milspec buffer tube that doesnt require rethreading your reciever.....

You should be fine mate. Mine went straight on. I did IIRC need some barrel shims just to snug it up. That said now I think about it it's a laylax 8way barrel in there as AG aren't making a BCM 9inch outer. On monday I'll try and have a play about with the actual Tm barrel.

@Softcore Angry gun BCM bolt, barrel, mcmr 8 rail and surefire blast warden. Furniture is RS stuff and the scout light setup is all genuine as well.

Latest glamour shot of the soon to be finally completed BCM recce style cqb build.

See.... I went the other way. Stock internals, more cqb friendly externals.

Direct Action dump pouch...... Fast shipping from Poland and a feature I really like. Due to the design it can have other pouches inside its molle mounting. So yeah.... a folding dump pouch that doesn't hog up space. Also the personally signed thanks for buying our kit card is nice as well.

Latest build state. Really liking the AngryGun BCM front end and Surefire Blast Warden. Next buys are BCM Gunfighter Mod 3 grip and a foregrip.

Fire Support have a range of discounted prices on TM kit at the moment, https://www.fire-support.co.uk/imports/marui-sale-and-restock-2019-12-17