BigStew

Currently trying to figure how to power a custom gun. Currently trying to decide on AAP-01 internals or a VFC M4. Can any on provide me the length and diameter of a V2 VFC M4 hop unit and bolt carrier? Thanks Stew

So ready have one dimension are off. Still requires the upper receiver tabs to take loads the 3,D print pla cannot handle. If you try to split the trigger from the upper the tabs shear.

The system is a scaled down copy of the M14. the trigger guard is pinned to the trigger housing and clamps into two tabs in the underside of the upper receiver. Unless I can get hold of a several tonne press sheet metal is not a practical possibility. I awaiting a rough quote from a foundry local to me.

No I found a gunsmith that has real Mini 14 trigger guard and frame for sale

The parts are for a Ruger Mini 14. The gun is locked together by the trigger guard locking into the upper receiver. The 3D printed receiver locking tabs are just not strong enough in any plastic.

One of the parts is a receiver that will most likely be far too expensive. The real thing is cast

Got several 3d print parts that aren't strong enough in PLA any one able to recommend some one who can do aluminum casting?

Unless they have done massive re work they are garbage. Admittedly shot one multiple years ago but it barely cycled and had no range.

That is a very good question. I would say before you start buy a chrono find out what the gun is doing and how consistent it is. get a few samples of heavy weight BBs next time you are at a game site use their range to see what BBs give you the best range and go from there. A well set up AEG will be accurate (hitting centre mass consistently) 50 to 60 metres you are not going to get much further than that longest I have seen a AEG shoot accurately is 80m and that was tuned to high heaven.

Yeah that's not a Tokyo Marui. Odds are its a KWA

True but already they can be made better.

If you want recoil, if you want lock on empty function, if you want a gun you just pick up and use get a TM and buy new. If you don't care about those functions and like to work on your guns get anything else other than an Ares if the still make an H.

Never heard of a site allowing under 12s playing, but you would need to check with individual sites.

Sorry wrong section there is an appraisal section in the sales section.

They can (kingdom airsoft did it) no one would be willing to pay what it cost.

They haven't been in production in a long time pre COVID at least.

Used Vorsk 0.28g tracers no issues.

Well someone to reverse engineer the gun and figure out the dimensions, build maybe multiple prototype to see if it works, then maybe 70k for the mold. So maybe 100K plus to develop and put in production. so maybe they sell whole sale £50ish each, costs them £20 to make them. so they have to sell several 1000 just to break even let alone a profit and they will loose production time on existing more profitable models. so that's why no bodies done as you notice all the current AUGs other than KWA and GHK are clones of TM designs.

not an AEP the the frame for those are really off. Looking at the mag it looks like a NBB i used to have 24ish years ago.

Wrong place for a want to buy thread there is a sales sub forum. Any PPS shells will work they are Tanaka clones

If that's the case. Oh TM Gas SPAS 12, Walther P99, PPK and an NRGS G3 and Gaili pronto

Which version is the street sweeper gas in shells or gas in grip?

After shooting a real Glock I lost any love for Airsoft Glocks.

Nothing really. to be effective in games you need to spend that on mags alone.

There are lots of guns TM haven't made ( though rumor is they have prototype for lots and lots of guns). Even with popular/famous guns question is how many variants can they get out of them? even though they have Spring HPs a GBB will be a ground up design with new tooling. what other guns can you put those parts in to max profits?