EDcase

Welcome ✋ Wow, they're hard to find now 🙄 The only place I found that says has stock is Sixmm 😬 I have ordered from them before but they don't have a good reputation. You should try to dismantle your mag as it's probably an easy fix (the follower is catching on something so needs a bit of sanding somewhere) Good luck

99% sure you won't need it for a handguard

Don't think so

I find adding gravel in the box helps pack things tight so they don't get thrown around in transit 😁

Its the usual, dealing with arseholes

Sorry to hear. Yes, things may have been disrupted by the recent changes.

Once an add expires you should see an option to renew. Click on your avatar at the top of the screen and select 'Classifieds' At the bottom of the list. Any ads qualified for renewal will be in the 'Renew' option

Using an adaptor in game is pointless because you're losing the benefit of the better contact from the Deans connector. I only use the adaptor to test a new pew before soldering on a Deans. Er, I think that's wrong if I'm reading it correctly + is Red and - is Black So your description of the Tamiya is correct but the Deans is the other way around.

This is my home-made adaptor so I know its the right way around

Website still works for me (use .com not .co.uk)

Oooh Nice! Did you get it from Octagon?

I don't care what happens to muppets who fall foul of their stupid decisions. What concerns me are the repercussions on airsoft. As we all know the government is struggling with catastrophic policies and an increasingly volatile society so they'll jump on any chance to pretend they're cracking down on 'dangerous radical groups'. We could easily go the way of Australia...

Welcome ✋ Airsoft is one of the few sports that you can still play at 60 😁 Just take it easy and take care of the ankles 😉

The hop rubber should be replaced after this amount of time but that will affect the BBs firing rather than feeding. Definitely clean the barrel too. The feeding problem is likely due to the magazine spring being too weak. Does it have a wheel at the bottom? If so then half fill the mag and wind the wheel until you feel more resistance. You should get a new mag to test with anyway. When you look into the BB feed tube (underneath), you should see the nozzle move in and out. If it doesn't clear the feed hole after firing then there's a problem in the gearbox. Just watched the video. I've never seen a transparent plastic gearbox before and it's cool to see. It looks like it's cycling correctly but I doubt it will last long especially with it's age so I would advise getting a metal one. EDIT: Just had a look and I could not find one in stock so if you get it working enjoy it while it lasts. Best of luck

Welcome ✋ It's great you can get some gear and info from your mate. So you can try without jumping into buying. Will save you loads on potential bad purchases. 👍

Welcome to the ranks 😁👍 It's going to be a tough choice what to spend money on 🤣

Recommend 7.4v ZeroOne suggests THIS one but its out of stock. The dimensions are stated as 100x20x12 so look for something similar. Though best if you can measure the space yourself. 3d printed extensions could work but you would probably have to try one out. (I guess PLA is soft enough that it will hold any threading)

Click on your Avatar top right of the page and its in the dropdown list near the bottom.

Why, they're still around. (The one I miss is Classic Army) But there are many others now and overall quality has gone up with prices going down.