Joe142

Finally finished my Hi capa and TM MWS and I’m loving the looks of them 
 
2 separate posts with parts list below 😁 
 
Base - TM MWS 
Stock - magpul CTR 
Buffer tube - Airsoft artisan 6 position tube 
Buffer - G&P buffer v2 
Sling mount - T8 QD sling swivel plate 
Grip - magpul MOE K2 XL 
Trigger guard - REVANCHIST trigger guard 
Mag release - REVANCHIST mag release 
Charging handle - Angry gun airborne ambi
Rail - angry gun MK16 MLOK 9.3” rail 
Outer barrel - angry gun L119A2 10” barrel
Inner barrel - Laylax 250mm 6.03 
Bucking - cow cow 60 degree bucking 
Hop arm - Laylax hop arm 
Optic - VORTEX crossfire 2 
Pressure switch - WADSN dual pressure switch
Torch - WADSN M600C 
Torch mount - WADSN Thorntail MLOK mount
DBAL - WADSN DBAL-A2
Suppressor - angry gun SOCOM556 
Mags - guns modify 35rd mag x5 
Hand stop - PTS hand stop 

the hi capa 😁
 
Base - TM hi capa 5.1 
Magwell - LA capa customs V2 defender 
Grip screws - LA capa customs V2 ‘S1’ screws
Hammer - LA capa customs ‘HIVE’ hammer 
Sights - AIP fibre optic sights 
Slide - Airsoft masterpiece custom X-2 slide 
Outer barrel - LA capa customs ‘tornado’ threaded outer barrel 
Blowback housing - EDGE custom blowback housing ver 2 
Bucking - maple leaf autobot 50 degree 
Nozzle spring - AIP 140% spring 
Nozzle - AIP reinforced nozzle 
Hammer/recoil spring - AIP 140% spring 
Guide plug - AIP guide plug 
Guide rod - LA capa customs duralumin tornado 
Hop unit - limited edition HCH x Nexxspeed TDC hop unit 
Inner barrel - nine ball 5” 6.00 power inner barrel 
Trigger (not installed) - Nexxspeed CNC speed trigger 
Tracer unit - Acetech bifrost 
Torch - nuprol X300
Thread adapter - LA capa customs reversible thread adapter 

Finally (almost) finished my new OD green loadout 😁 just have my helmet setup to make then I’ll be happy (didn’t have a pic wearing it so a flat lie out pic will have to do 😂) 
 
kit list is as follows 
 
Trousers - 5.11 flex tac stryke pants 
Top - desert night camo jacket 
Plate carrier - T.Rex arms AC1
Placard - spiritus systems micro fight mk V  with spiritus systems 5.56 insert 
Drop pouch - spiritus systems OTB SACK pouch mk2 
Sling - Blackhawk storm sling (QD version)
Inner Belt - FROG PRO cobra inner belt
Outer belt - FROG PRO cobra operator belt
Mag pouches - ESSTAC 5.56 single KYWI shorty and ESSTAC 1+1 side by side P + 5.56 KYWI pouch 
Med pouch - coyote tactical solutions burrito 
Holster - Blackhawk omnivore (will be changed to mid ride when mount arrives) 
Gloves - PIG FDT delta utility glove 
Glasses - ESS ICE 3s 
Hat - Haley strategic thinking cap 

It’s one of my fav camos at the min 😁

Finally (almost) finished my new OD green loadout 😁 just have my helmet setup to make then I’ll be happy (didn’t have a pic wearing it so a flat lie out pic will have to do 😂) 
 
kit list is as follows 
 
Trousers - 5.11 flex tac stryke pants 
Top - desert night camo jacket 
Plate carrier - T.Rex arms AC1
Placard - spiritus systems micro fight mk V  with spiritus systems 5.56 insert 
Drop pouch - spiritus systems OTB SACK pouch mk2 
Sling - Blackhawk storm sling (QD version)
Inner Belt - FROG PRO cobra inner belt
Outer belt - FROG PRO cobra operator belt
Mag pouches - ESSTAC 5.56 single KYWI shorty and ESSTAC 1+1 side by side P + 5.56 KYWI pouch 
Med pouch - coyote tactical solutions burrito 
Holster - Blackhawk omnivore (will be changed to mid ride when mount arrives) 
Gloves - PIG FDT delta utility glove 
Glasses - ESS ICE 3s 
Hat - Haley strategic thinking cap 

DNC is cool as fcuk 👌

Finally finished my Hi capa and TM MWS and I’m loving the looks of them 
 
2 separate posts with parts list below 😁 
 
Base - TM MWS 
Stock - magpul CTR 
Buffer tube - Airsoft artisan 6 position tube 
Buffer - G&P buffer v2 
Sling mount - T8 QD sling swivel plate 
Grip - magpul MOE K2 XL 
Trigger guard - REVANCHIST trigger guard 
Mag release - REVANCHIST mag release 
Charging handle - Angry gun airborne ambi
Rail - angry gun MK16 MLOK 9.3” rail 
Outer barrel - angry gun L119A2 10” barrel
Inner barrel - Laylax 250mm 6.03 
Bucking - cow cow 60 degree bucking 
Hop arm - Laylax hop arm 
Optic - VORTEX crossfire 2 
Pressure switch - WADSN dual pressure switch
Torch - WADSN M600C 
Torch mount - WADSN Thorntail MLOK mount
DBAL - WADSN DBAL-A2
Suppressor - angry gun SOCOM556 
Mags - guns modify 35rd mag x5 
Hand stop - PTS hand stop 

the hi capa 😁
 
Base - TM hi capa 5.1 
Magwell - LA capa customs V2 defender 
Grip screws - LA capa customs V2 ‘S1’ screws
Hammer - LA capa customs ‘HIVE’ hammer 
Sights - AIP fibre optic sights 
Slide - Airsoft masterpiece custom X-2 slide 
Outer barrel - LA capa customs ‘tornado’ threaded outer barrel 
Blowback housing - EDGE custom blowback housing ver 2 
Bucking - maple leaf autobot 50 degree 
Nozzle spring - AIP 140% spring 
Nozzle - AIP reinforced nozzle 
Hammer/recoil spring - AIP 140% spring 
Guide plug - AIP guide plug 
Guide rod - LA capa customs duralumin tornado 
Hop unit - limited edition HCH x Nexxspeed TDC hop unit 
Inner barrel - nine ball 5” 6.00 power inner barrel 
Trigger (not installed) - Nexxspeed CNC speed trigger 
Tracer unit - Acetech bifrost 
Torch - nuprol X300
Thread adapter - LA capa customs reversible thread adapter 

Finally (almost) finished my new OD green loadout 😁 just have my helmet setup to make then I’ll be happy (didn’t have a pic wearing it so a flat lie out pic will have to do 😂) 
 
kit list is as follows 
 
Trousers - 5.11 flex tac stryke pants 
Top - desert night camo jacket 
Plate carrier - T.Rex arms AC1
Placard - spiritus systems micro fight mk V  with spiritus systems 5.56 insert 
Drop pouch - spiritus systems OTB SACK pouch mk2 
Sling - Blackhawk storm sling (QD version)
Inner Belt - FROG PRO cobra inner belt
Outer belt - FROG PRO cobra operator belt
Mag pouches - ESSTAC 5.56 single KYWI shorty and ESSTAC 1+1 side by side P + 5.56 KYWI pouch 
Med pouch - coyote tactical solutions burrito 
Holster - Blackhawk omnivore (will be changed to mid ride when mount arrives) 
Gloves - PIG FDT delta utility glove 
Glasses - ESS ICE 3s 
Hat - Haley strategic thinking cap 

Finally (almost) finished my new OD green loadout 😁 just have my helmet setup to make then I’ll be happy (didn’t have a pic wearing it so a flat lie out pic will have to do 😂) 
 
kit list is as follows 
 
Trousers - 5.11 flex tac stryke pants 
Top - desert night camo jacket 
Plate carrier - T.Rex arms AC1
Placard - spiritus systems micro fight mk V  with spiritus systems 5.56 insert 
Drop pouch - spiritus systems OTB SACK pouch mk2 
Sling - Blackhawk storm sling (QD version)
Inner Belt - FROG PRO cobra inner belt
Outer belt - FROG PRO cobra operator belt
Mag pouches - ESSTAC 5.56 single KYWI shorty and ESSTAC 1+1 side by side P + 5.56 KYWI pouch 
Med pouch - coyote tactical solutions burrito 
Holster - Blackhawk omnivore (will be changed to mid ride when mount arrives) 
Gloves - PIG FDT delta utility glove 
Glasses - ESS ICE 3s 
Hat - Haley strategic thinking cap 

Finally finished my Hi capa and TM MWS and I’m loving the looks of them 
 
2 separate posts with parts list below 😁 
 
Base - TM MWS 
Stock - magpul CTR 
Buffer tube - Airsoft artisan 6 position tube 
Buffer - G&P buffer v2 
Sling mount - T8 QD sling swivel plate 
Grip - magpul MOE K2 XL 
Trigger guard - REVANCHIST trigger guard 
Mag release - REVANCHIST mag release 
Charging handle - Angry gun airborne ambi
Rail - angry gun MK16 MLOK 9.3” rail 
Outer barrel - angry gun L119A2 10” barrel
Inner barrel - Laylax 250mm 6.03 
Bucking - cow cow 60 degree bucking 
Hop arm - Laylax hop arm 
Optic - VORTEX crossfire 2 
Pressure switch - WADSN dual pressure switch
Torch - WADSN M600C 
Torch mount - WADSN Thorntail MLOK mount
DBAL - WADSN DBAL-A2
Suppressor - angry gun SOCOM556 
Mags - guns modify 35rd mag x5 
Hand stop - PTS hand stop 

the hi capa 😁
 
Base - TM hi capa 5.1 
Magwell - LA capa customs V2 defender 
Grip screws - LA capa customs V2 ‘S1’ screws
Hammer - LA capa customs ‘HIVE’ hammer 
Sights - AIP fibre optic sights 
Slide - Airsoft masterpiece custom X-2 slide 
Outer barrel - LA capa customs ‘tornado’ threaded outer barrel 
Blowback housing - EDGE custom blowback housing ver 2 
Bucking - maple leaf autobot 50 degree 
Nozzle spring - AIP 140% spring 
Nozzle - AIP reinforced nozzle 
Hammer/recoil spring - AIP 140% spring 
Guide plug - AIP guide plug 
Guide rod - LA capa customs duralumin tornado 
Hop unit - limited edition HCH x Nexxspeed TDC hop unit 
Inner barrel - nine ball 5” 6.00 power inner barrel 
Trigger (not installed) - Nexxspeed CNC speed trigger 
Tracer unit - Acetech bifrost 
Torch - nuprol X300
Thread adapter - LA capa customs reversible thread adapter 

Finally (almost) finished my new OD green loadout 😁 just have my helmet setup to make then I’ll be happy (didn’t have a pic wearing it so a flat lie out pic will have to do 😂) 
 
kit list is as follows 
 
Trousers - 5.11 flex tac stryke pants 
Top - desert night camo jacket 
Plate carrier - T.Rex arms AC1
Placard - spiritus systems micro fight mk V  with spiritus systems 5.56 insert 
Drop pouch - spiritus systems OTB SACK pouch mk2 
Sling - Blackhawk storm sling (QD version)
Inner Belt - FROG PRO cobra inner belt
Outer belt - FROG PRO cobra operator belt
Mag pouches - ESSTAC 5.56 single KYWI shorty and ESSTAC 1+1 side by side P + 5.56 KYWI pouch 
Med pouch - coyote tactical solutions burrito 
Holster - Blackhawk omnivore (will be changed to mid ride when mount arrives) 
Gloves - PIG FDT delta utility glove 
Glasses - ESS ICE 3s 
Hat - Haley strategic thinking cap 

Latest Glockbuild. TM G18C donorgun.
 
Going for the sofisticated sexy look.
So far I’m happy with it. Just needs some braking in.

Just got my first airsoft weapon yesterday and can't wait to try it out. Been taking the young lad for a while and just renting the gear but looking forward to getting into the hobby properly. 
 

I'm just all about the late 90s vibes hon.
 

Progress. Awaiting GBBR from Hong Kong. 

Old belt config for greenery.

Invicta Battlefield last Sunday

Invicta Battlefield on that stoooopid hot sunday beginning of this month!
 
 

Baldy on patrol, usually wear a boonie to hide the shine & protect my bonce but misting up eyepro was annoying me.

It's been a long time coming,  But I bought what I consider my holy grail of guns since I first started back in 2016.
 
Daytona AK105 with my WE Desert Eagle,  ran it at my local CQB site,  they may not be what people consider Meta but god damn is it fun firing these two guns
 

Few upgrades from AK2M4, delivered next day as promised.  Perun and XT 22TPA for the boy's G36.  Another XT 22TPA, plus a ZCI hop unit and ML bucking for my Double Eagle. 
.
 
Had a few mins spare tonight, so out with the old motor from the Double Eagle...
 
...and in with the new

 
Not a night and day difference over the stock motor, I stupidly didn't do a direct before and after comparison but the trigger response is a bit quicker.   Suspect they are both in the same ballpark windings wise.  Magnets on the stock motor are no match for the new XT though.  Expect it will prove itself when I run it on 3S instead of my current 2S.
 

Can't beat a classic; will probably run this combo this weekend, especially since one of my m14s needs converting to deans connectors before I can use it. I've found myself moving away from gucci rifle wraps and adopting a more realistic approach to camo. Elastic bands for natural veg on the day and making sure nothing interferes with the operating parts of the weapon (my expensive wrap has a tendency to obscure the scope picture, leading to me having to manually move parts out of the way). I could paint it, but I don't want to because I love how it looks and don't want to potentially ruin the aesthetic of the mk12.
 
Literally some donor scrim net I got for free held on by cable ties and elastic bands that I will pair with either a £25 uncrafted cobra hood, or my £60 ghillie cape. Don't need to spend out masses to be a bush!
 

Been working on this. Still a work in progress. 
 
It's a close representation of the actual minimi's used by the ill fated "Bravo two zero" (as pictured)
 
It's a basic Mk1 minimi, but was fitted with a gpmg flash hider. 
 
Mine started as a TOP M249, but has external upgrades,
Replica flash hider
Guarder steel gas block
Guarder steel centre block
Guarder steel cocking lever
Guarder steel body parts. 
G&P steel bipod
ANGS top cover,
This is being worked on to actually have a working round indicator. 
 
Genuine rear sight 
Genuine box mag (period correct)
Genuine stock (not fitted yet) 
 

Work in progress, BRT CAR15-SD 300 blk replica.
 
This gun encompasses all the best bits of various guns imo;
Its a sub-gun / PDW - my fave size.
MP5SD vibes - just love MP5s.
Retractable stock - again MP5.
AR controls - ergonomics.
20rd mags - easy to shoot when prone.
300 subsonics - cool as F in real steel.
 
 
 

New MWS build. I've been startingly original and daring in building another URG-I, but in long boi flavour, to join its schtumpig sibling (points if you get the film reference there!)
 
Mostly HAO and Magpul externals, with a couple of BavTac bits inside; Zet plate, nozzle spring and hop nub. 
 
I've put a waaaaay too long description of the parts and the build experience in the MWS thread because clearly I had too much time on my hands when I was on leave. 
 

Thanks all for your suggestions. 
 
@Joe142 @Shamal I agree about 5.11 kit. Had a few bits over the years for airsoft and while I was serving., and found them to be of decent, rugged quality. Always keeping an eye out for a bargain on the 190l CAMS bag. 
 
This is what I bought earlier in the year after, like you @TheFull9 not finding anything suitable at my go-to kit retailers, and most of the gun stores I've used also coming up blank.
 
I like the design and amount of storage in the DSLEAF, especially for mags, but the rifles never feel properly secure and, with two rifles and 7 gas mags, the stitching on the shoulder strap gave way. 
 
@gavinkempsell unfortunately, a couple of the sites I go to have a bit of a walk from the car park to the safe zone, so having a suitably sized, sturdy grip is necessary.
 
@RostokMcSpoonsgood shout! Heading there now.