Jump to content
Updated Classifieds rule 5 - Adverts must include your username and date in photos

Aengus

Members
 View Profile  See their activity

  • Posts

    948

  • Joined

  • Last visited

  • Days Won

    2

  • Feedback

    100%

 Content Type 

Everything posted by Aengus

  1. Aengus
    Duster or 144a I think
  2. Aengus
    Np remember when I was there myself. Also if you go for a lipo make sure you have it on a fire proof surface away from anything that could combust and keep an eye on it (same for Nimh but not as important but still should just its more important with lipo's as they like to go out with a bang, but 99.9% of people don't have any problems but better to be safe than sorry) and get a lipo alarm to make sure you take them out before they're fully dead. In regard to your other question generally g&g combat machines are the go to beginner gun because there's more parts, tutorials, accessories etc. for them. If you could possibly stretch to it I'd go for the g&g umg as they've got the standard from g&g (magical internals and good reliability) but the trade off is price (£200 new and about the same second hand with loads of mags and stuff)
  3. Aengus
    Assume that most guns/batteries/chargers have mini Tamiya connectors unless it says otherwise. The smart charger you use depends on the battery so here's some stuff: Nimh: Slower trigger response and rof but if they go dead unlike a lipo you recharge them and use them again no problem. Would say don't use anything lower than a 9.4v. Selection of 9.6 Nimh's: http://www.landwarriorairsoft.com/batteries-bbs-gas-chronographs-c5/batteries-c62/we-airsoft-europe-m167/9-6v-t426 And charger for them: http://www.landwarriorairsoft.com/batteries-bbs-gas-chronographs-c5/chargers-c141/we-airsoft-europe-we-europe-n3-nimh-battery-charger-p3512 Lipo: Faster trigger response and rof but once they go dead they're dead forever. I would say only only use a 7.4v no higher unless you have an active braking mosfet Selection of 7.4 lipo's: http://www.landwarriorairsoft.com/batteries-bbs-gas-chronographs-c5/batteries-c62/we-airsoft-europe-m167/7-4v-t424 Chargers (would recommend the more expensive one as its a lot better but if you can't stretch to £50 go for the cheaper one): http://www.landwarriorairsoft.com/batteries-bbs-gas-chronographs-c5/chargers-c141/lipo-battery-charger-t430
  4. Aengus
    What laws ? And I thought airsoft falls under imitation firearms in the law ?
  5. Aengus
    Same. Although it may boil down to the person dealing with its knowledge about the law best to put your contact details on the parcel (mobile mainly but more can't hurt)
  6. Aengus
    If they're getting two toned they should go through customs fine as long as you're above 18. Make sure to declare them when you're travelling to avoid any scares.
  7. Aengus

    Gun's Broke itself.. again >:( techy filed the nozzle down and it was fine for the game but now gun is royally f*cked think the air nozzle has went too far forward and broke the hop aswell (the actual arm that pushes on the rubber) Tempting to fix it then sell it an buy a ump, mp5 or scorpion that wont break on me.

    1. Show previous comments  12 more
    2. Aengus

      Aengus

      Duck,how much would you pay for my g&g gr16, recently been reshimmed and generally maintained, fitted with a shs aluminium air nozzle (slightly too long just needs filed) and shs metal hop unit (broken) also note gun is two tone (just pistol grip and handguard it's starting to come off anyway) and nothing included just the gun

    3. Sitting Duck

      Sitting Duck

      Hard to say, it is a 2-tone so I personally not looking to buy another to strip off the paint again really. Can't see how the hop got bollox'd unless it wasn't assembled properly or something. I haven't had to file nozzle yet but have shaved/filed tappet plate instead for seal/feed issues.

    4. Sitting Duck

      Sitting Duck

      Best thing is maybe take a pic, shove it up for an appraisal, to get a fair price for it. If it is worth a gamble I could buy it, see how bad it is and offer you first refusal on it if a simple fix. You pay the cost of gun and if in say 2 months it still works then just the cost of repair parts n postage. Genuine offer depending on value coz I got enough G&G's n don't want a 2-tone tbh

  8. Aengus
    http://www.patrolbase.co.uk/airsoft-rigs-plate-carriers-assault-vests/8fields-tactical-replica-interceptor-body-armour-black.htm#.Vav4TIqkrCQ
  9. Aengus
    Air soft innovations tornado grenade - uses gas and fires bb's whilst spinning hence the name and is reusable. Just google it
  10. Aengus

    Just sol a charlie bear i bought aaaages ago.. for £50 (only paid £25 for it new) *puts shades on*

  11. Aengus

    Thoughts on the we m&p's ? (as far as i know on this one the full auto problem is fixed) and anyone got mags for it theyd be willing to sell ?

    1. M_P

      M_P

      I've got one and I think its pretty crap, it'll do the job in cqb but not much more. I've got the tm too and it's in a different league, definitely get that if you can stretch to it.

    2. Aengus

      Aengus

      For £55 is it worth going for ?

    3. M_P

      M_P

      Yeah that's about fair imo, if I were to sell mine (I'm not :P) I'd put it up for £65 Inc postage and 3 mags and be prepared for it to go a bit under.

  12. Aengus
    Depends on the look you want ? how far back you mount it, eye relief etc..
  13. Aengus
    I have mines up at £27 but will do a deal for you
  14. Aengus
    I have one for sale not sure if it's what you want but here it is http://www.airsoft-forums.co.uk/index.php/topic/25976-3-9x-sniper-scope-mounts-and-mk6-helmet/#entry203504 (pm me and I can do you a good deal)
  15. Aengus
    What would be the ranges you'd normally shoot people at ? If you do CQB I'd recommend going down the red dot route but for woodland a good mildot scope will work. What magnification would you want (if any) ?
  16. Aengus

    Peoples thoughts on the KWA Glocks ? (34 specifically)

  17. Aengus

    Holy sh*t second hand charlie bears are worth alot ! If you want to buy mines pm me, gonna get some nice midcaps and a pistol :D

    1. ak2m4

      ak2m4

      wtf is a Charlie Bear... and why haven't I got one.

  18. Aengus
    3 scars on my hand along the index fingers tendon (couldn't use it for a day and even then it hurt like a b*tch) and 1 on my knuckles shot from about 10m away but it still left a massive blood blister and me being me after 2 weeks forgot about it and punched someone...
  19. Aengus

    Reseated the hop nubber and my gun seemed fine for the first 10 or so shots then it started not firing the bb again, narrowed it down to the hop blocking the bb as the gun's feeding fine

    1. Show previous comments  4 more
    2. Sitting Duck

      Sitting Duck

      gearbox case just above n below where nozzle is. place strips of tape to push hop unit further forward that should allow bb's to enter hop better - might lose a bit of fps but try a couple strips top/bottom

    3. Sitting Duck

      Sitting Duck

      should push hop forward so nozzle clears to allow bb's to flow. No big deal if it fails just remove tape and poke the gun up techy's ar$e

    4. Sitting Duck

      Sitting Duck

      not saying it is a proper fix but more a test to see if nozzle is still not clearing 101% causing feed issue. Fix may involve 101% exact nozzle tappet plate shaving etc... but only by people who know and can fix the exact issue - like a techie but a good one

  20. Aengus

    Just got my gun back from being repaired (new hop up, air nozzle and piston head) and it only occasionally fires bbs now. Using high caps and dont have any midcaps at hand to see if it's my mags, any ideas ?

    1. Esoterick

      Esoterick

      Send it back to the shop?

    2. Sitting Duck

      Sitting Duck

      with one of your mags

  21. Aengus
    He hasn't played yet 😨 I tried to convince him to save more and buy a second hand g&g or ics but he was having none of it.
  22. Aengus
    Yeah he asked for an electric gun so I asked his budget (£20) so yeah jbbg was his only chance
  23. Aengus
    I sent a friend to JustBBguns
  24. Aengus
    Colonel Kurtz I disagree stongly. What if you're a minor that wants an expensive gun say a gbbr (obvs well into airsoft) if everyone was really snobby about it and wouldn't two tone either you'd need someone to sell it illegally, a older friend with a ukara, a parent with a ukara or to risk it with customs none of which are particularly legal or moral. I feel like sometimes the snobbery around two toned rifles/younger players can make people that are new feel uncomfortable and unwanted i.e putting them off airsoft. ^^ sorry for short unstructured rant
  25. Aengus

    Might of just bought a kitten :P (incoming month of piss and shite in random places around the house) But.. that also means my airsoft loadout's on hold :(

    1. Show previous comments  1 more
    2. Sitting Duck

      Sitting Duck

      male cats have the most character - either silly as a bag of nuts & dopey soppy sods or mental f*ckers. Plus clawing - kittens have razor claws n teeth, and bring you lots of presents - mice, birds

    3. Colonel Kurtz

      Colonel Kurtz

      Is your loadout on hold because of the kitten taking the funding, or because you need to wait for it to grow and it's all part of a plan for a genuine-fur russian winter loadout? :)

    4. Aengus

      Aengus

      Kitten taking the funding ;)

×
×
  • Create New...