All Activity
- Past hour
-
Let's face it, all politicians are self serving cunts, the mere desire to do the job should automatically disqualify someone from doing so. Whoever gets in will do whatever they think will get them more votes so they can spend longer on the gravy train. Fortunatly the UK airsoft scene provides lots of jobs and some decent tax revenue , which are good arguments for not fucking about with it.
-
Nice i sold all my mags and just wanted an exhaust valve for a hpa adapter. I will probably order from KJW works as a backup. Just in case.....
-
Nick G reacted to a reply to a status update: Going to be a bit quiet on the forum for a time. Had a motorcycle crash at Brands Hat
-
JinxDuh reacted to a post in a topic: Custom paint work
-
Would it be at all possible for a measurement on the nozzle fitted? I have a sneaking suspicion the guy I bought it from has messed with it prior, as the one I replaced had 0 air seal and was about 1/2 the size of the one I fitted to test. No worries if not of course, as they're not the easiest things to get too!
-
JinxDuh reacted to a post in a topic: LCT VSS Issues
-
DesertTech Silverback SRS-A1 Stealth Recon Scout 2018 Model
ArcTek posted an advert in Spring Rifles
Time Left: 6 days and 23 hours
- For sale
- Used
Description Used Silverback SRS-A1 2018 Model Model: 22" Colour: Black Type: Spring, Right Handed, Pull bolt Accessories - x3 Magazines - x1 Magazine Pouch - x1 Nuprol Carry Case -x1 Scope "attached to RIF" -x1 BiPod "attached to RIF" - Approximately 400 - 500 "0.45g" Longbow BB's Delivery - Pick up available. - Courier available : will cost extra, quote available on supplying address. Notes Excludes original packaging Payment Options - Bank : Free - PayPal : Free If you're interested, please drop an email at - [email protected]£395
Coupar Angus, Perthshire - GB
-
John_W reacted to a post in a topic: National Service
-
John_W reacted to a post in a topic: National Service
-
John_W reacted to a post in a topic: National Service
-
Time Left: 6 days and 23 hours
- For sale
- As new
Here is a custom handcrafted cobra hood, ghillie mask and gun rap. All this kit has been skirmished 3 times so a few fake leaves and bits have been torn off but still plenty of camo to hide away with. The gun rap itself can extend from 33-50 inches fully stretched and the mask has mesh goggles built into the mask but no face protection. The cobra hood itself has a few buckles that can be tightened or loosened to fit you.£150
Leicester , England - GB
-
John_W reacted to a post in a topic: National Service
-
John_W reacted to a post in a topic: National Service
-
John_W reacted to a post in a topic: National Service
-
John_W reacted to a post in a topic: National Service
-
Back when I used to have my KC02, I just ordered direct from KJW works. Yes it takes a couple of weeks but the parts did show up. I cant comment on exhaust valves as I never had one of those fail. Make sure you keep the O rings greased
-
-
Ollie Patterson 1994 joined the community
- Today
-
Yep! That would seem to be an issue. I have just looked at the lad's one and the nozzle is fully engaged with the hop rubber lips.
-
Aye, battery goes into the suppressor. I have a battery cradle I 3d printed to hold the battery off of the barrel (That also acts as a second barrel stabilizer). Starting to think I'm paranoid about barrel stabilization...
-
-
-
There’s about 1/5 open area with the nozzle fully fowards, so I think that’s the next thing to remedy. Seems to be the likely culprit!
-
Colt Carry Handle M16 Scopes
hunter511 replied to Tactical Pith Helmet's topic in General Discussion
Yeah. Id probably roll the dice on the above as the Brownells uk prices on the scope are eyewatering £360+ if memory serves from the quick google I did. -
PiratesARRus left Positive feedback for RecsPowerCode
-
if the hop is fully on then the nub is pushing in too far for the bbs to get past, same thing happened with my cyma vss looks like you may need to trim the lip on the rubber to eliminate any potential bbs catching on the lip I used an asg ultimate m130 on mine and it fired out at 562fps on a .20, did the same thing as you and fitted a titan plus 18:1 gears and new compressions parts. standard V3 hop unit with ML 60, omega nub and standard 400mm inner barrel. changed to a m120 and dropped it to 490. with hop applied it fires .43s lovely and straight I believe the battery goes in the suppressor on the LCT? on the cyma it goes in the stock, could the battery be pushing on your barrel maybe even with the spacer?
-
What you are experiencing is normal. With the hop fully on, the BBs cannot make their bid for freedom and get jammed up; if you keep doing it, you risk damaging the piston/sector gear/tappet plate. When the nozzle is fully forward, the tip should be in the lips (ooer, missus!) To check the nozzle/rubber interface for air leaks, make sure there are no BBs in the chamber, turn the gun upside down, put a bit of paper over the feed tube and pull the trigger. If the paper does a credible impression of a Russian tank turret, the nozzle and rubber are not sealing. If it stays still or just moves a little bit, all is good.
-
Time Left: 6 days and 21 hours
- For sale
- Used
Hello reader, I am selling an colt AR carry handle scope. I got this in a package deal with a RIF as a sweetener so other than fitting it to some rifles for photos thats about it for personal use. Previous owner(s) have for some reason tried to remove the screws from the mount so they are a bit grugged but all still fitted tight. It has a little wear and tear around the edges but nothing broken. It has J A P A N - A O marking on the bottom but my phone camera is not good enough to focus properly. On the top it has the Colt logo printed. The crosshair reticle is one of the finest I've seen in all colt scopes, repro and real, I've seen and owned. Might be a gamble but it could be a genuine japanese original from the late 1960s to early 1970s onwards. I would say it is more likely this is one of the earlier Brownells reproductions they've started selling since around 2018 onwards. On the Brownells website a new one's RRP is £419.90 as of writing this advert (01/06/2024) so an asking price of £215 with postage and PayPal fees included I feel is reasonable. Thanks for looking.£215
- GB
-
-
Daveoc33 left Positive feedback for woody_2231
-
woody_2231 left Positive feedback for Daveoc33
-
Time Left: 6 days and 20 hours
- For sale
- As new
Right handed 5.11 Tactical Thumb drive Holster For Glock 19/23, 5.11 Thigh Rig and Mag Pouch. Everything is brand new apart from the mag pouch which I've used once and found it's surplus as I have another two of them. Far as I know the holster fits TM Glock 19 gen 3 and gen 4. Should fit VFC/Umarex G19's as well and VFC/Strak arms Glock19's too as they are real steel sized but can't confirm as I don't own any. Does have a RMR cut and open muzzle end for threaded outer barrel's, the anti snatch guard (what 5.11 call chop block) doesn't interfere with the RMR neither but if you don't like it it's removable, comes with belt loop and paddle. Thigh rig is excellent, stays in place and don't flap around all over the place when running, you know what I am talking about if you used Guarder or Viper drop legs. Mag pouch is for 2011/ Glock mags, it's slightly over sized because of the dimensional differences between RS and airsoft mags but I buy this size deliberate, it's just the right size to use with various mags if you own other pistols, does have screw adjustment but I've lined the inside top of the pouches with black electrical tape and have been using my other two with my TM P226, M9, M&P9 mags to give you a idea, basically you can make it work with any RS copy airsoft double stack mag. I bought everything £130'ish before post form tactical-kit looking for £85, including both post and paypal.£85
-
Yeah, gearbox cycles and it does push BB’s in because if I pull the trigger 3 times then push the hop up to “off” and it’ll fire all 3 (Plus the fourth) out. I’m not sure if it’s common for BB’s to not fire with full hop tbh, I’ve never really messed about with the AK hop ups. My V2 hops do fire on full hop though. How would I check for air leaks? I’ve compression tested the piston parts and all seems good. I did notice the nozzle sitting a bit awkwardly though; There’s a slight gap between the nozzle and rubber. Again, not sure if that’s normal.
-
I've mulled over one of these many a time over the years, ultimately went for an ACOG for my M16 carry handle upper because that's what the Bad Company 2 M16 in BF2042 has and I love it tbh (early 2000s aesthetic). But I've never not been able to find the retro Colt scope clones in stock somewhere any time I've looked I have to say. https://www.aliexpress.com/item/1005006287579209.html?spm=a2g0o.store_pc_allItems_or_groupList.0.0.197c1c55QbPYS5&pdp_npi=4%40dis!GBP!£41.64!£41.64!!!51.45!51.45!%402103846917172473533577324ea631!12000036620160530!sh!UK!0! https://www.amazon.co.uk/SPINA-OPTICS-Hunting-Handle-Reticle/dp/B0C5CXQRP4 https://www.octagonairsoft.com/product-page/fcw-4x20-scope-with-colt-marking
-
-
3 x Cyma MP5 metal mags, straight, mid cap (110 rounds)
GrumpyChris posted an advert in Electric Rifles
-
If the gearbox is cycling, the spring will deliver the power that it is capable of minus any losses due to air leaks. When you say that it does not fire, what do you mean? Do you mean that it cycles but a BB does not whizz out of the barrel or do you means that the gearbox does not cycle? If the former, do you expect it to with the hop fully on? I have tried that with an AK and it usually jams.
-
dr_Romeo joined the community
-
Well that's me sold then... I've got a few Fjallraven shirts and they are unbelievably comfortable for camping etc... Cheers gents!
-
My initial thought was the stock motor unable to handle the m130 and produce enough air/power, but I don’t have a spare motor to test my theory 😅