-
Posts
238 -
Joined
-
Last visited
-
Feedback
100%
Profile Information
-
Guns
TM M&P9, TM mp7 GBB
-
Loadouts
Anything basically
-
Sites
Ucap bunker, ucap vendetta and ucap valiant
-
Gender
Male
-
Location
Southampton
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
Justjay1986's Achievements
-
Update - new cylinder head, barrel and hop rubber sorted the issue lol
-
Possibly so, I've had sporadic problems with bb's rolling out when cocking back at times also. Frustrating me endless amounts now
-
So I'm currently working on a mates vsr compatible specna, which will not exceed 400fps no matter what I try. Compression seems fine and the FPS is actually pretty consistent. But not going over. It's stock barrel and rubber (which I'll likely be changing soon, and possibly the culprit of this) but it's got a Maple leaf spring (m145) and spring guide, vsr cylinder and piston and Airsoft pro trigger set. All firing really well not a blip, apart from this sodding FPS. Am I missing something really simple here? Tia Edit The reason the hop isn't done yet, is because the rubber we gave me doesn't sit right.....don't ask.
-
-
This advert is COMPLETED!
- For sale
- Used
Good condition, works flawlessly. Slight dink in the LCD cover, doesn't affect use or interfere with the actual LCD. Comes with deans adapter, deans to tamiya, power cable and power cable with croc clips. Doesn't need a transformer as this is the AC version. Unboxed but will be packaged well. Price is fees and post included.£38.50
- GB
-
I found them poor in an aeg (think that was said also) but in my TM MP7, phenomenal.
-
-
This advert is COMPLETED!
- For sale
- Used
As per the title really. Very bright, usb charges. Comes on a rail mount which can be removed if so wished. Has had a coat of black paint to tidy it up as was dusted in tan ages ago. None of the paint is on the lens. Price all in. Collection welcome from Hedge End, near Southampton£37.50
- GB
-
This advert is COMPLETED!
- For sale
- Used
Barely used, has a High Torque Motor installed and an upgraded Maple Leaf Hop Rubber and a decent barrel. Currently firing 335 FPS on a 0.2. There is no MOSFET installed therefore runs nicely on a 7.4v titan battery. I have rewired to the front and the included battery fits nicely in the handguard. There is a box of 5 midcaps never used included (only tested one for feeding) Also included is an Odin *style* speed loader with a 3D Printed Mag adapter I printed which works well. A titan 7.4v battery is included as is the 3x optic on the top which has three colour reticles. The mount for the sight is also 3d printed but is fairly solid. There is a (yes you guessed it) 3D printed tri rail on the suppressor for a torch. Due to this, the easiest way to install the battery is to just unscrew the suppressor, pop the retaining clip out and slide the handguard up and then reverse. There are a couple of small holes in the underside of the handguard from an old rail being installed which have been filled with black sealant. I will throw the original solid stock in however getting the sliding off is a pain due to the tightness of it. Even sliding the stock is tight but I really wanted a sliding stock 😂😂 either way, you can always reinstall the solid and keep it front wired. I think that's it for now, pls PM me any interest or questions. Price is inclusive of post, but I don't have a box so collection may be better (Hedge End near Southampton) Price Inc PayPal Fees£250
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
As per the pic pls, need asap. Don't care of condition as long as the screw hole at the right is fine and the thing isn't broken.NO VALUE SPECIFIED
- GB
-
-
This advert is COMPLETED!
- For sale
- Used
1x gas tight mag but missing baseplate. Gun works and I've tested it by manually dropping the selector. But dropped therefore needs a new back strap, new fire selector on both sides. Easy fix for someone, eagle6 should sell the parts or fire support, i just CBA. Price is ono plus post.£75
- GB
-
This advert is COMPLETED!
- For sale
- Used
So to begin with, excuse the photo. I will this evening be taking better and uploading then. This TM MP5 is a lovely rif. It's been upgraded with a Gate Titan, high torque Motor, new inner barrel (slightly longer than stock and SS) which has a maple leaf hop rubber installed. It slings 0.28s a fair way and has a great rof and trigger response. It has 4 mid caps also which are painted to match. It will include the claw mount (low) but TORCH OR RED DOT ARE NOT INCLUDED IN SALE. There is also one titan 7.4v 3000mAh battery with it. I've also made a 3d printed butt stock which has a nifty little battery indicator for your battery! I've added a 3d printed cheek riser which can be removed as only on with VHB tape. Overall, a lovely, fun gun. I might even have the 3d printed tracer suppressor somewhere which I made, fits an xcortech tracer in and screws onto the bayonet fitting. Pics to follow. Price is posted and fees for PayPal included. Collection welcome from near Southampton for a slightly lower price.£350
- GB
-
-